Strip color codes from translations

worldedit-core/src/main/java/com/boydti/fawe/config/BBC.java

@@ -28,36 +28,36 @@ public enum BBC {
      * Things to note about this class:
      * Can use multiple arguments %s, %s1, %s2, %s3 etc
      */
-    PREFIX("&8(&4&lFAWE&8)&r&7", "Info"),
+    PREFIX("(FAWE)", "Info"),
     FILE_DELETED("%s0 has been deleted.", "Info"),
     SCHEMATIC_PASTING("&7The schematic is pasting. This cannot be undone.", "Info"),
-    LIGHTING_PROPOGATE_SELECTION("&7Lighting has been propogated in %s0 chunks. (Note: To remove light use //removelight)", "Info"),
-    UPDATED_LIGHTING_SELECTION("&7Lighting has been updated in %s0 chunks. (It may take a second for the packets to send)", "Info"),
-    SET_REGION("&7Selection set to your current allowed region", "Info"),
-    WORLDEDIT_COMMAND_LIMIT("&7Please wait until your current action completes", "Info"),
-    WORLDEDIT_DELAYED("&7Please wait while we process your FAWE action...", "Info"),
-    WORLDEDIT_RUN("&7Apologies for the delay. Now executing: %s", "Info"),
-    WORLDEDIT_COMPLETE("&7Edit completed.", "Info"),
+    LIGHTING_PROPOGATE_SELECTION("Lighting has been propogated in %s0 chunks. (Note: To remove light use //removelight)", "Info"),
+    UPDATED_LIGHTING_SELECTION("Lighting has been updated in %s0 chunks. (It may take a second for the packets to send)", "Info"),
+    SET_REGION("Selection set to your current allowed region", "Info"),
+    WORLDEDIT_COMMAND_LIMIT("Please wait until your current action completes", "Info"),
+    WORLDEDIT_DELAYED("Please wait while we process your FAWE action...", "Info"),
+    WORLDEDIT_RUN("Apologies for the delay. Now executing: %s", "Info"),
+    WORLDEDIT_COMPLETE("Edit completed.", "Info"),
     REQUIRE_SELECTION_IN_MASK("&7%s of your selection is not within your mask. You can only make edits within allowed regions.", "Info"),
     WORLDEDIT_VOLUME("&7You cannot select a volume of %current%. The maximum volume you can modify is %max%.", "Info"),
-    WORLDEDIT_ITERATIONS("&7You cannot iterate %current% times. The maximum number of iterations allowed is %max%.", "Info"),
+    WORLDEDIT_ITERATIONS("You cannot iterate %current% times. The maximum number of iterations allowed is %max%.", "Info"),
     WORLDEDIT_UNSAFE("&7Access to that command has been blocked", "Info"),
     WORLDEDIT_DANGEROUS_WORLDEDIT("&cProcessed unsafe edit at %s0 by %s1", "Info"),
     WORLDEDIT_EXTEND("&cYour edit may have extended outside your allowed region.", "Error"),
-    WORLDEDIT_TOGGLE_TIPS_ON("&7Disabled FAWE tips.", "Info"),
-    WORLDEDIT_TOGGLE_TIPS_OFF("&7Enabled FAWE tips.", "Info"),
+    WORLDEDIT_TOGGLE_TIPS_ON("Disabled FAWE tips.", "Info"),
+    WORLDEDIT_TOGGLE_TIPS_OFF("Enabled FAWE tips.", "Info"),
 
-    WORLDEDIT_BYPASSED("&7Currently bypassing FAWE restriction.", "Info"),
+    WORLDEDIT_BYPASSED("Currently bypassing FAWE restriction.", "Info"),
     WORLDEDIT_UNMASKED("&6Your FAWE edits are now unrestricted.", "Info"),
 
-    WORLDEDIT_RESTRICTED("&6Your FAWE edits are now restricted.", "Info"),
-    WORLDEDIT_OOM_ADMIN("&cPossible options:\n&8 - &7//fast\n&8 - &7Do smaller edits\n&8 - &7Allocate more memory\n&8 - &7Disable `max-memory-percent`", "Info"),
+    WORLDEDIT_RESTRICTED("Your FAWE edits are now restricted.", "Info"),
+    WORLDEDIT_OOM_ADMIN("Possible options:\n - //fast\n - Do smaller edits\n - Allocate more memory\n - Disable `max-memory-percent`", "Info"),
     COMPRESSED("History compressed. Saved ~ %s0b (%s1x smaller)", "Info"),
 
     WEB_UNAUTHORIZED("Only links from the configured web host is allowed: %s0", "Error"),
     ACTION_COMPLETE("Action completed in %s0 seconds", "Info"),
     GENERATING_LINK("Uploading %s, please wait...", "Web"),
-    GENERATING_LINK_FAILED("&cFailed to generate download link!", "Web"),
+    GENERATING_LINK_FAILED("Failed to generate download link!", "Web"),
     DOWNLOAD_LINK("%s", "Web"),
 
     MASK_DISABLED("Global mask disabled", "WorldEdit.General"),
@@ -97,7 +97,7 @@ public enum BBC {
     OPERATION("Operation queued (%s0)", "WorldEdit.Operation"),
 
     SELECTION_WAND("Left click: select pos #1; Right click: select pos #2", "WorldEdit.Selection"),
-    NAVIGATION_WAND_ERROR("&cNothing to pass through", "WorldEdit.Navigation"),
+    NAVIGATION_WAND_ERROR("Nothing to pass through", "WorldEdit.Navigation"),
 
     SELECTION_WAND_DISABLE("Edit wand disabled.", "WorldEdit.Selection"),
     SELECTION_WAND_ENABLE("Edit wand enabled.", "WorldEdit.Selection"),
@@ -124,7 +124,7 @@ public enum BBC {
     BRUSH_TARGET_MASK_SET("Set target mask to %s0", "WorldEdit.Brush"),
     BRUSH_TARGET_OFFSET_SET("Set target offset to %s0", "WorldEdit.Brush"),
     BRUSH_EQUIPPED("Equipped brush %s0", "WorldEdit.Brush"),
-    BRUSH_TRY_OTHER("&cThere are other more suitable brushes e.g.\n&8 - &7//br height [radius=5] [#clipboard|file=null] [rotation=0] [yscale=1.00]", "WorldEdit.Brush"),
+    BRUSH_TRY_OTHER("There are other more suitable brushes e.g.\n - //br height [radius=5] [#clipboard|file=null] [rotation=0] [yscale=1.00]", "WorldEdit.Brush"),
     BRUSH_COPY("Left click the base of an object to copy, right click to paste. Increase the brush radius if necessary.", "WorldEdit.Brush"),
     BRUSH_HEIGHT_INVALID("Invalid height map file (%s0)", "WorldEdit.Brush"),
     BRUSH_SMOOTH("Note: Use the blend brush if you want to smooth overhangs or caves.", "WorldEdit.Brush"),
@@ -149,8 +149,8 @@ public enum BBC {
     ROLLBACK_ELEMENT("Undoing %s0", "WorldEdit.Rollback"),
 
     TOOL_INSPECT("Inspect tool bound to %s0.", "WorldEdit.Tool"),
-    TOOL_INSPECT_INFO("&7%s0 changed %s1 to %s2 %s3 ago", "WorldEdit.Tool"),
-    TOOL_INSPECT_INFO_FOOTER("&6Total: &7%s0 changes", "WorldEdit.Tool"),
+    TOOL_INSPECT_INFO("%s0 changed %s1 to %s2 %s3 ago", "WorldEdit.Tool"),
+    TOOL_INSPECT_INFO_FOOTER("Total: %s0 changes", "WorldEdit.Tool"),
     TOOL_NONE("Tool unbound from your current item.", "WorldEdit.Tool"),
     TOOL_INFO("Info tool bound to %s0.", "WorldEdit.Tool"),
     TOOL_TREE("Tree tool bound to %s0.", "WorldEdit.Tool"),
@@ -198,21 +198,21 @@ public enum BBC {
     NOTHING_CONFIRMED("You have no actions pending confirmation.", "WorldEdit.Utility"),
 
 
-    SCHEMATIC_PROMPT_CLEAR("&7You may want to use &c%s0 &7to clear your current clipboard first", "Worldedit.Schematic"),
-    SCHEMATIC_SHOW("&7Displaying &a%s0&7 schematics from &a%s1&7:\n" +
-            "&8 - &aLeft click &7a structure to set your clipboard\n" +
-            "&8 - &aRight click &7to add a structure to your multi-clipboard\n" +
-            "&8 - &7Use &a%s2&7 to go back to the world", "Worldedit.Schematic"),
+    SCHEMATIC_PROMPT_CLEAR("You may want to use %s0 to clear your current clipboard first", "Worldedit.Schematic"),
+    SCHEMATIC_SHOW("Displaying %s0 schematics from %s1:\n" +
+            " - Left click a structure to set your clipboard\n" +
+            " - Right click to add a structure to your multi-clipboard\n" +
+            " - Use %s2 to go back to the world", "Worldedit.Schematic"),
     SCHEMATIC_FORMAT("Available formats (Name: Lookup names)", "Worldedit.Schematic"),
-    SCHEMATIC_MOVE_EXISTS("&c%s0 already exists", "Worldedit.Schematic"),
-    SCHEMATIC_MOVE_SUCCESS("&a%s0 -> %s1", "Worldedit.Schematic"),
-    SCHEMATIC_MOVE_FAILED("&a%s0 no moved: %s1", "Worldedit.Schematic"),
+    SCHEMATIC_MOVE_EXISTS("%s0 already exists", "Worldedit.Schematic"),
+    SCHEMATIC_MOVE_SUCCESS("%s0 -> %s1", "Worldedit.Schematic"),
+    SCHEMATIC_MOVE_FAILED("%s0 no moved: %s1", "Worldedit.Schematic"),
     SCHEMATIC_LOADED("%s0 loaded. Paste it with //paste", "Worldedit.Schematic"),
     SCHEMATIC_SAVED("%s0 saved.", "Worldedit.Schematic"),
     SCHEMATIC_PAGE("Page must be %s", "WorldEdit.Schematic"),
     SCHEMATIC_NONE("No files found.", "WorldEdit.Schematic"),
     SCHEMATIC_LIST("Available files (Filename: Format) [%s0/%s1]:", "Worldedit.Schematic"),
-    SCHEMATIC_LIST_ELEM("&8 - &a%s0 &8- &7%s1", "Worldedit.Schematic"),
+    SCHEMATIC_LIST_ELEM(" - %s0 - %s1", "Worldedit.Schematic"),
 
     CLIPBOARD_URI_NOT_FOUND("You do not have %s0 loaded", "WorldEdit.Clipboard"),
     CLIPBOARD_CLEARED("Clipboard cleared", "WorldEdit.Clipboard"),
@@ -237,45 +237,45 @@ public enum BBC {
 
     BLOCK_CYCLER_CANNOT_CYCLE("That block's data cannot be cycled!", "WorldEdit.Cycler"),
     BLOCK_CYCLER_LIMIT("Max blocks change limit reached.", "WorldEdit.Cycler"),
-    BLOCK_CYCLER_NO_PERM("&cYou are not permitted to cycle the data value of that block.", "WorldEdit.Cycler"),
+    BLOCK_CYCLER_NO_PERM("You are not permitted to cycle the data value of that block.", "WorldEdit.Cycler"),
 
     COMMAND_INVALID_SYNTAX("The command was not used properly (no more help available).", "WorldEdit.Command"),
 
-    COMMAND_CLARIFYING_BRACKET("&7Added clarifying bracket for &c%s0", "WorldEdit.Help"),
-    HELP_SUGGEST("&7Couldn't find %s0. Maybe try one of &c%s1 &7?", "WorldEdit.Help"),
+    COMMAND_CLARIFYING_BRACKET("Added clarifying bracket for %s0", "WorldEdit.Help"),
+    HELP_SUGGEST("Couldn't find %s0. Maybe try one of %s1 ?", "WorldEdit.Help"),
     HELP_HEADER_CATEGORIES("Command Types", "WorldEdit.Help"),
     HELP_HEADER_SUBCOMMANDS("Subcommands", "WorldEdit.Help"),
-    HELP_HEADER_COMMAND("&cHelp for: &7%s0", "WorldEdit.Help"),
-    HELP_ITEM_ALLOWED("&a%s0&8 - &7%s1", "WorldEdit.Help"),
-    HELP_ITEM_DENIED("&c%s0&8 - &7%s1", "WorldEdit.Help"),
+    HELP_HEADER_COMMAND("Help for: %s0", "WorldEdit.Help"),
+    HELP_ITEM_ALLOWED("%s0 - %s1", "WorldEdit.Help"),
+    HELP_ITEM_DENIED("%s0 - %s1", "WorldEdit.Help"),
     HELP_HEADER("Help: page %s0/%s1", "WorldEdit.Help"),
-    HELP_FOOTER("&7Wiki: https://git.io/vSKE5", "WorldEdit.Help"),
+    HELP_FOOTER("Wiki: https://git.io/vSKE5", "WorldEdit.Help"),
     PAGE_FOOTER("Use %s0 to go to the next page", "WorldEdit.Utility"),
 
     PROGRESS_MESSAGE("%s1/%s0 (%s2%) @%s3cps %s4s left", "Progress"),
     PROGRESS_FINISHED("[ Done! ]", "Progress"),
 
-    COMMAND_SYNTAX("&cUsage: &7%s0", "Error"),
-    NO_PERM("&cYou are lacking the permission node: %s0", "Error"),
+    COMMAND_SYNTAX("Usage: %s0", "Error"),
+    NO_PERM("You are lacking the permission node: %s0", "Error"),
     BLOCK_NOT_ALLOWED("You are not allowed to use", "Error"),
-    SETTING_DISABLE("&cLacking setting: %s0", "Error"),
-    BRUSH_NOT_FOUND("&cAvailable brushes: %s0", "Error"),
-    BRUSH_INCOMPATIBLE("&cBrush not compatible with this version", "Error"),
-    SCHEMATIC_NOT_FOUND("&cSchematic not found: &7%s0", "Error"),
-    NO_REGION("&cYou have no current allowed region", "Error"),
-    NO_MASK("&cYou have no current mask set", "Error"),
-    NOT_PLAYER("&cYou must be a player to perform this action!", "Error"),
-    PLAYER_NOT_FOUND("&cPlayer not found:&7 %s0", "Error"),
+    SETTING_DISABLE("Lacking setting: %s0", "Error"),
+    BRUSH_NOT_FOUND("Available brushes: %s0", "Error"),
+    BRUSH_INCOMPATIBLE("Brush not compatible with this version", "Error"),
+    SCHEMATIC_NOT_FOUND("Schematic not found: %s0", "Error"),
+    NO_REGION("You have no current allowed region", "Error"),
+    NO_MASK("You have no current mask set", "Error"),
+    NOT_PLAYER("You must be a player to perform this action!", "Error"),
+    PLAYER_NOT_FOUND("Player not found: %s0", "Error"),
     OOM(
-            "&8[&cCritical&8] &cDetected low memory i.e. < 1%. We will take the following actions:\n&8 - &7Terminate WE block placement\n&8 - &7Clear WE history\n&8 - &7Unload non essential chunks\n&8 - &7Kill entities\n&8 - &7Garbage collect\n&cIgnore this if trying to crash server.\n&7Note: Low memory is likely (but not necessarily) caused by WE",
+            "[Critical] Detected low memory i.e. < 1%. We will take the following actions:\n - Terminate WE block placement\n - Clear WE history\n - Unload non essential chunks\n - Kill entities\n - Garbage collect\nIgnore this if trying to crash server.\nNote: Low memory is likely (but not necessarily) caused by WE",
             "Error"),
 
-    WORLDEDIT_SOME_FAILS("&c%s0 blocks weren't placed because they were outside your allowed region.", "Error"),
-    WORLDEDIT_SOME_FAILS_BLOCKBAG("&cMissing blocks: %s0", "Error"),
+    WORLDEDIT_SOME_FAILS("%s0 blocks weren't placed because they were outside your allowed region.", "Error"),
+    WORLDEDIT_SOME_FAILS_BLOCKBAG("Missing blocks: %s0", "Error"),
 
-    WORLDEDIT_CANCEL_COUNT("&cCancelled %s0 edits.", "Cancel"),
-    WORLDEDIT_CANCEL_REASON_CONFIRM("&7Your selection is large (&c%s0 &7-> &c%s1&7, containing &c%s3&7 blocks). Use &c//confirm &7to execute &c%s2", "Cancel"),
-    WORLDEDIT_CANCEL_REASON("&cYour WorldEdit action was cancelled:&7 %s0&c.", "Cancel"),
+    WORLDEDIT_CANCEL_COUNT("Cancelled %s0 edits.", "Cancel"),
+    WORLDEDIT_CANCEL_REASON_CONFIRM("Your selection is large (%s0 -> %s1, containing %s3 blocks). Use //confirm to execute %s2", "Cancel"),
+    WORLDEDIT_CANCEL_REASON("Your WorldEdit action was cancelled: %s0.", "Cancel"),
     WORLDEDIT_CANCEL_REASON_MANUAL("Manual cancellation", "Cancel"),
     WORLDEDIT_CANCEL_REASON_LOW_MEMORY("Low memory", "Cancel"),
     WORLDEDIT_CANCEL_REASON_MAX_CHANGES("Too many blocks changed", "Cancel"),
@@ -286,7 +286,7 @@ public enum BBC {
     WORLDEDIT_CANCEL_REASON_OUTSIDE_LEVEL("Outside world", "Cancel"),
     WORLDEDIT_CANCEL_REASON_OUTSIDE_REGION("Outside allowed region (bypass with /wea, or disable `region-restrictions` in config.yml)", "Cancel"),
     WORLDEDIT_CANCEL_REASON_NO_REGION("No allowed region (bypass with /wea, or disable `region-restrictions` in config.yml)", "Cancel"),
-    WORLDEDIT_FAILED_LOAD_CHUNK("&cSkipped loading chunk: &7%s0;%s1&c. Try increasing chunk-wait.", "Cancel"),
+    WORLDEDIT_FAILED_LOAD_CHUNK("Skipped loading chunk: %s0;%s1. Try increasing chunk-wait.", "Cancel"),
 
     ASCEND_FAIL("No free spot above you found.", "Navigation"),
     ASCENDED_PLURAL("Ascended %s0 levels.", "Navigation"),
@@ -310,59 +310,59 @@ public enum BBC {
     SEL_MAX("%s0 points maximum.", "Selection"),
     SEL_FUZZY("Fuzzy selector: Left click to select all contingent blocks, right click to add. To select an air cavity, use //pos1.", "Selection"),
     SEL_CONVEX_POLYHEDRAL("Convex polyhedral selector: Left click=First vertex, right click to add more.", "Selection"),
-    SEL_LIST("For a list of selection types use:&c //sel list", "Selection"),
+    SEL_LIST("For a list of selection types use: //sel list", "Selection"),
     SEL_MODES("Select one of the modes below:", "Selection"),
 
-    SCRIPTING_NO_PERM("&cYou do not have permission to execute this craft script", "WorldEdit.Scripting"),
+    SCRIPTING_NO_PERM("You do not have permission to execute this craft script", "WorldEdit.Scripting"),
     SCRIPTING_CS("Use /cs with a script name first.", "WorldEdit.Scripting"),
     SCRIPTING_ERROR("An error occured while executing a craft script", "WorldEdit.Scripting"),
 
-    TIP_SEL_LIST("Tip: See the different selection modes with &c//sel list", "Tips"),
+    TIP_SEL_LIST("Tip: See the different selection modes with //sel list", "Tips"),
     TIP_SELECT_CONNECTED("Tip: Select all connected blocks with //sel fuzzy", "Tips"),
-    TIP_SET_POS1("Tip: Use pos1 as a pattern with &c//set pos1", "Tips"),
-    TIP_FARWAND("Tip: Select distant points with &c//farwand", "Tips"),
+    TIP_SET_POS1("Tip: Use pos1 as a pattern with //set pos1", "Tips"),
+    TIP_FARWAND("Tip: Select distant points with //farwand", "Tips"),
     TIP_DISCORD("Need help using FAWE? https://discord.gg/ngZCzbU", "Tips"),
 
     // cut
-    TIP_LAZYCUT("&7Tip: It is safer to use &c//lazycut", "Tips"),
+    TIP_LAZYCUT("Tip: It is safer to use //lazycut", "Tips"),
     // set
-    TIP_FAST("&7Tip: Set fast and without undo using &c//fast", "Tips"),
-    TIP_CANCEL("&7Tip: You can &c//cancel &7an edit in progress", "Tips"),
-    TIP_MASK("&7Tip: Set a global destination mask with &c/gmask", "Tips"),
-    TIP_MASK_ANGLE("Tip: Replace upward slopes of 3-20 blocks using&c //replace /[-20][-3] bedrock", "Tips"),
-    TIP_SET_LINEAR("&7Tip: Set blocks linearly with&c //set #l3d[wood,bedrock]", "Tips"),
-    TIP_SURFACE_SPREAD("&7Tip: Spread a flat surface with&c //set #surfacespread[5][0][5][#existing]", "Tips"),
-    TIP_SET_HAND("&7Tip: Use your current hand with &c//set hand", "Tips"),
+    TIP_FAST("Tip: Set fast and without undo using //fast", "Tips"),
+    TIP_CANCEL("Tip: You can //cancel an edit in progress", "Tips"),
+    TIP_MASK("Tip: Set a global destination mask with /gmask", "Tips"),
+    TIP_MASK_ANGLE("Tip: Replace upward slopes of 3-20 blocks using //replace /[-20][-3] bedrock", "Tips"),
+    TIP_SET_LINEAR("Tip: Set blocks linearly with //set #l3d[wood,bedrock]", "Tips"),
+    TIP_SURFACE_SPREAD("Tip: Spread a flat surface with //set #surfacespread[5][0][5][#existing]", "Tips"),
+    TIP_SET_HAND("Tip: Use your current hand with //set hand", "Tips"),
 
     // replace
-    TIP_REPLACE_REGEX("&7Tip: Replace using regex:&c //replace .*_log <pattern>", "Tips"),
-    TIP_REPLACE_REGEX_2("&7Tip: Replace using regex:&c //replace .*stairs[facing=(north|south)] <pattern>", "Tips"),
-    TIP_REPLACE_REGEX_3("&7Tip: Replace using operators:&c //replace water[level>2] sand", "Tips"),
-    TIP_REPLACE_REGEX_4("&7Tip: Replace using operators:&c //replace true *[waterlogged=false]", "Tips"),
-    TIP_REPLACE_REGEX_5("&7Tip: Replace using operators:&c //replace true *[level-=1]", "Tips"),
+    TIP_REPLACE_REGEX("Tip: Replace using regex: //replace .*_log <pattern>", "Tips"),
+    TIP_REPLACE_REGEX_2("Tip: Replace using regex: //replace .*stairs[facing=(north|south)] <pattern>", "Tips"),
+    TIP_REPLACE_REGEX_3("Tip: Replace using operators: //replace water[level>2] sand", "Tips"),
+    TIP_REPLACE_REGEX_4("Tip: Replace using operators: //replace true *[waterlogged=false]", "Tips"),
+    TIP_REPLACE_REGEX_5("Tip: Replace using operators: //replace true *[level-=1]", "Tips"),
 
-    TIP_REPLACE_ID("&7Tip: Replace only the block id:&c //replace woodenstair #id[cobblestair]", "Tips"),
-    TIP_REPLACE_LIGHT("Tip: Remove light sources with&c //replace #brightness[1][15] 0", "Tips"),
+    TIP_REPLACE_ID("Tip: Replace only the block id: //replace woodenstair #id[cobblestair]", "Tips"),
+    TIP_REPLACE_LIGHT("Tip: Remove light sources with //replace #brightness[1][15] 0", "Tips"),
     TIP_TAB_COMPLETE("Tip: The replace command supports tab completion", "Tips"),
 
     // clipboard
-    TIP_FLIP("Tip: Mirror with &c//flip", "Tips"),
-    TIP_DEFORM("Tip: Reshape with &c//deform", "Tips"),
-    TIP_TRANSFORM("Tip: Set a transform with &c//gtransform", "Tips"),
-    TIP_COPYPASTE("Tip: Paste on click with &c//br copypaste", "Tips"),
-    TIP_SOURCE_MASK("Tip: Set a source mask with &c/gsmask <mask>&7", "Tips"),
-    TIP_REPLACE_MARKER("Tip: Replace a block with your full clipboard using &c//replace wool #fullcopy", "Tips"),
-    TIP_PASTE("Tip: Place with &c//paste", "Tips"),
+    TIP_FLIP("Tip: Mirror with //flip", "Tips"),
+    TIP_DEFORM("Tip: Reshape with //deform", "Tips"),
+    TIP_TRANSFORM("Tip: Set a transform with //gtransform", "Tips"),
+    TIP_COPYPASTE("Tip: Paste on click with //br copypaste", "Tips"),
+    TIP_SOURCE_MASK("Tip: Set a source mask with /gsmask <mask>", "Tips"),
+    TIP_REPLACE_MARKER("Tip: Replace a block with your full clipboard using //replace wool #fullcopy", "Tips"),
+    TIP_PASTE("Tip: Place with //paste", "Tips"),
     TIP_LAZYCOPY("Tip: lazycopy is faster", "Tips"),
-    TIP_DOWNLOAD("Tip: Try out &c//download", "Tips"),
-    TIP_ROTATE("Tip: Orientate with &c//rotate", "Tips"),
-    TIP_COPY_PATTERN("Tip: To use as a pattern try &c#copy", "Tips"),
+    TIP_DOWNLOAD("Tip: Try out //download", "Tips"),
+    TIP_ROTATE("Tip: Orientate with //rotate", "Tips"),
+    TIP_COPY_PATTERN("Tip: To use as a pattern try #copy", "Tips"),
 
     // regen
     TIP_REGEN_0("Tip: Use a biome with /regen [biome]", "Tips"),
     TIP_REGEN_1("Tip: Use a seed with /regen [biome] [seed]", "Tips"),
 
-    TIP_BIOME_PATTERN("Tip: The &c#biome[forest]&7 pattern can be used in any command", "Tips"),
+    TIP_BIOME_PATTERN("Tip: The #biome[forest] pattern can be used in any command", "Tips"),
     TIP_BIOME_MASK("Tip: Restrict to a biome with the `$jungle` mask", "Tips"),;
 
 

worldedit-core/src/main/resources/cn/message.yml

@@ -5,65 +5,65 @@
 # 请其他译者勿使用机器翻译。谢谢！
 
 info:
-  prefix: '&8(&4&lFAWE&8)&r&7'
+  prefix: '(FAWE)'
   file_deleted: '%s0 已被删除。'
-  schematic_pasting: '&7正在粘贴布局。此操作无法撤销。'
-  lighting_propogate_selection: '&7光照已在 %s0 个区块内传播。（注：您可使用 //removelight 移除）'
-  updated_lighting_selection: '&7已更新 %s0 个区块内的光照。（数据包可能要稍后发出）'
-  set_region: '&7选择区域已设置为您当前允许的区域'
-  worldedit_command_limit: '&7请等待完成您的当前操作'
-  worldedit_delayed: '&7正在处理您的快异创世操作，请稍后···'
-  worldedit_run: '&7很抱歉造成延误，现正执行 %s'
-  worldedit_complete: '&7编辑完成。'
-  require_selection_in_mask: '&7您选中的 %s 不在蒙版内。您只能在允许的区域内编辑。'
-  worldedit_volume: '&7您不能选择 %current% 大小的区域。所允许的最大区域为 %max%。'
-  worldedit_iterations: '&7您不能重复 %current% 次。所允许的最多重复为 %max% 次。'
-  worldedit_unsafe: '&7已阻止对此命令的访问'
-  worldedit_dangerous_worldedit: '&c%s1 在 %s0 处进行了不安全的编辑'
-  worldedit_toggle_tips_on: '&7已禁用快异创世提示。'
-  worldedit_toggle_tips_off: '&7已启用快异创世提示。'
+  schematic_pasting: '正在粘贴布局。此操作无法撤销。'
+  lighting_propogate_selection: '光照已在 %s0 个区块内传播。（注：您可使用 //removelight 移除）'
+  updated_lighting_selection: '已更新 %s0 个区块内的光照。（数据包可能要稍后发出）'
+  set_region: '选择区域已设置为您当前允许的区域'
+  worldedit_command_limit: '请等待完成您的当前操作'
+  worldedit_delayed: '正在处理您的快异创世操作，请稍后···'
+  worldedit_run: '很抱歉造成延误，现正执行 %s'
+  worldedit_complete: '编辑完成。'
+  require_selection_in_mask: '您选中的 %s 不在蒙版内。您只能在允许的区域内编辑。'
+  worldedit_volume: '您不能选择 %current% 大小的区域。所允许的最大区域为 %max%。'
+  worldedit_iterations: '您不能重复 %current% 次。所允许的最多重复为 %max% 次。'
+  worldedit_unsafe: '已阻止对此命令的访问'
+  worldedit_dangerous_worldedit: '%s1 在 %s0 处进行了不安全的编辑'
+  worldedit_toggle_tips_on: '已禁用快异创世提示。'
+  worldedit_toggle_tips_off: '已启用快异创世提示。'
   
-  worldedit_bypassed: '&7正绕过快异创世限制。'
-  worldedit_unmasked: '&6您的快异创世编辑现已不受限制。'
+  worldedit_bypassed: '正绕过快异创世限制。'
+  worldedit_unmasked: '您的快异创世编辑现已不受限制。'
 
-  worldedit_restricted: '&6您的快异创世编辑现正受限制。'
+  worldedit_restricted: '您的快异创世编辑现正受限制。'
   worldedit_oom_admin: |-
-    &c可选项:
-    &8 - &7//fast
-    &8 - &7进行小编辑
-    &8 - &7分配更多内存
-    &8 - &7禁用 `max-memory-percent`
+    可选项:
+     - //fast
+     - 进行小编辑
+     - 分配更多内存
+     - 禁用 `max-memory-percent`
   compressed: '已压缩历史。保存为 ~ %s0b（%s1 倍原大小）'
   action_complete: '已在 %s0 秒内完成操作'
   
 error:
-  worldedit_extend: '&c您的编辑可能已超过所允许的范围。'
+  worldedit_extend: '您的编辑可能已超过所允许的范围。'
   web_unauthorized: '仅允许来自已配置网页主机的链接: %s0'
-  command_syntax: '&c用法: &7%s0'
-  no_perm: '&c您缺少权限节点: %s0'
-  setting_disable: '&c缺少设置: %s0'
-  brush_not_found: '&c可用画笔: %s0'
-  brush_incompatible: '&c画笔与此版本不兼容'
-  schematic_not_found: '&c未找到布局: &7%s0'
-  no_region: '&c您当前没有允许修改的区域'
-  no_mask: '&c您当前没有蒙版集'
-  not_player: '&c您必须为玩家才能执行此操作！'
-  player_not_found: '&c玩家未找到:&7 %s0'
+  command_syntax: '用法: %s0'
+  no_perm: '您缺少权限节点: %s0'
+  setting_disable: '缺少设置: %s0'
+  brush_not_found: '可用画笔: %s0'
+  brush_incompatible: '画笔与此版本不兼容'
+  schematic_not_found: '未找到布局: %s0'
+  no_region: '您当前没有允许修改的区域'
+  no_mask: '您当前没有蒙版集'
+  not_player: '您必须为玩家才能执行此操作！'
+  player_not_found: '玩家未找到: %s0'
   oom: |-
-    &8[&c致命错误&8] &c系统检测到可用内存 < 1%。我们将执行下列操作:
-    &8 - &7终止创世的方块放置
-    &8 - &7清除创世历史
-    &8 - &7卸载无用区块
-    &8 - &7杀死实体
-    &8 - &7收集垃圾
-    &c若您正尝试使服务器崩溃，请忽略此消息
-    &7注：低内存可能但不一定由创世导致
-  worldedit_some_fails: '&c%s0 个方块由于在您所允许的区域外而无法放置。'
-  worldedit_some_fails_blockbag: '&c缺少方块: %s0'
+    [致命错误] 系统检测到可用内存 < 1%。我们将执行下列操作:
+     - 终止创世的方块放置
+     - 清除创世历史
+     - 卸载无用区块
+     - 杀死实体
+     - 收集垃圾
+    若您正尝试使服务器崩溃，请忽略此消息
+    注：低内存可能但不一定由创世导致
+  worldedit_some_fails: '%s0 个方块由于在您所允许的区域外而无法放置。'
+  worldedit_some_fails_blockbag: '缺少方块: %s0'
   
 web:
   generating_link: '正在上传 %s，请稍后···'
-  generating_link_failed: '&c生成下载链接失败！'
+  generating_link_failed: '生成下载链接失败！'
   download_link: '%s'
   
 worldedit:
@@ -126,7 +126,7 @@ worldedit:
     selection_shift: 已移动区域
     selection_cleared: 已清除选择
   navigation:
-    navigation_wand_error: '&c无可传递项'
+    navigation_wand_error: '无可传递项'
   anvil:
     world_is_loaded: 执行操作时世界不能被占用。请先卸载世界，或使用 -f 标记覆盖（请先保存）
   brush:
@@ -140,8 +140,8 @@ worldedit:
     brush_target_offset_set: 设置目的地偏移量 %s0
     brush_equipped: 已装备画笔 %s0
     brush_try_other: |-
-      &c 还有其他画笔可用，如：
-      &8 - &7//br height [半径=5] [#剪贴板|文件=null] [旋转=0] [纵坐标=1.00]
+       还有其他画笔可用，如：
+       - //br height [半径=5] [#剪贴板|文件=null] [旋转=0] [纵坐标=1.00]
     brush_copy: 左击要复制的对象，右击粘贴。您可增加画笔半径。
     brush_height_invalid: 高度图文件无效 (%s0)
     brush_smooth: '注：您可用混合刷使凸起与洞穴处变得平滑。'
@@ -165,8 +165,8 @@ worldedit:
     rollback_element: 正在撤消 %s0
   tool:
     tool_inspect: 已绑定检查工具至 %s0。
-    tool_inspect_info: '&7%s0 在 %s3 前将 %s1 更改为 %s2'
-    tool_inspect_info_footer: '&6共计: &7%s0 处更改'
+    tool_inspect_info: '%s0 在 %s3 前将 %s1 更改为 %s2'
+    tool_inspect_info_footer: '共计: %s0 处更改'
     tool_none: 工具已从您的当前物品上解绑。
     tool_info: 已绑定信息工具至 %s0。
     tool_tree: 已绑定造树工具至 %s0。
@@ -197,22 +197,22 @@ worldedit:
     nothing_confirmed: 您没有待确认的操作。
     page_footer: 请使用 %s0 前往下一页
   schematic:
-    schematic_prompt_clear: '&7您可能需先使用 &c%s0 &7来清除剪贴板'
+    schematic_prompt_clear: '您可能需先使用 %s0 来清除剪贴板'
     schematic_show: |-
-      &7正在显示来自 &a%s1&7 的 &a%s0&7 个原理图:
-      &8 - &a左击&7将结构复制到您的剪贴板
-      &8 - &a右击&7将结构添加到多重剪贴板
-      &8 - &7使用 &a%s2&7 回到原世界
+      正在显示来自 %s1 的 %s0 个原理图:
+       - 左击将结构复制到您的剪贴板
+       - 右击将结构添加到多重剪贴板
+       - 使用 %s2 回到原世界
     schematic_format: '可用格式 (名称: 搜索名称)'
     schematic_loaded: '已加载 %s0。请使用 //paste 粘贴'
     schematic_saved: '已保存 %s0。'
     schematic_page: 页数必须为 %s
     schematic_none: 未找到文件。
     schematic_list: '可用文件 (文件名: 格式) [%s0/%s1]:'
-    schematic_list_elem: '&8 - &a%s0 &8- &7%s1'
-    schematic_move_exists: '&c%s0 已存在'
-    schematic_move_success: '&a%s0 -> %s1'
-    schematic_move_failed: '&a%s0 未移动: %s1'
+    schematic_list_elem: ' - %s0 - %s1'
+    schematic_move_exists: '%s0 已存在'
+    schematic_move_success: '%s0 -> %s1'
+    schematic_move_failed: '%s0 未移动: %s1'
   clipboard:
     clipboard_cleared: 已清除剪贴板
     clipboard_invalid_format: '未知剪贴板格式: %s0'
@@ -237,22 +237,22 @@ worldedit:
   command:
     command_invalid_syntax: 命令使用有误 (无帮助可用)。
   help:
-    command_clarifying_bracket: '&7已为 &c%s0 &7添加阐述括号'
-    help_suggest: '&7无法找到 %s0。试试 &c%s1 &7吗？'
+    command_clarifying_bracket: '已为 %s0 添加阐述括号'
+    help_suggest: '无法找到 %s0。试试 %s1 吗？'
     help_header_categories: 命令类型
     help_header_subcommands: 子命令
-    help_header_command: '&7%s0 &c帮助'
-    help_item_allowed: '&a%s0&8 - &7%s1'
-    help_item_denied: '&c%s0&8 - &7%s1'
+    help_header_command: '%s0 帮助'
+    help_item_allowed: '%s0 - %s1'
+    help_item_denied: '%s0 - %s1'
     help_header: '帮助: 页 %s0/%s1'
-    help_footer: '&7维基页面: https://git.io/vSKE5'
+    help_footer: '维基页面: https://git.io/vSKE5'
 progress:
   progress_message: '剩余 %s1/%s0 (%s2%) @%s3cps %s4s'
   progress_finished: '[ 完成! ]'
 cancel:
-  worldedit_cancel_count: '&c已取消 %s0 次编辑。'
-  worldedit_cancel_reason_confirm: '&7您的选择区域过大 (&c%s0 &7-> &c%s1&7，内有 &c%s3&7 个方块)。请使用 &c//confirm &7继续执行 &c%s2'
-  worldedit_cancel_reason: '&c已取消您的创世操作:&7 %s0&c.'
+  worldedit_cancel_count: '已取消 %s0 次编辑。'
+  worldedit_cancel_reason_confirm: '您的选择区域过大 (%s0 -> %s1，内有 %s3 个方块)。请使用 //confirm 继续执行 %s2'
+  worldedit_cancel_reason: '已取消您的创世操作: %s0.'
   worldedit_cancel_reason_manual: 手动取消
   worldedit_cancel_reason_low_memory: 内存不足
   worldedit_cancel_reason_max_changes: 方块更改过多
@@ -261,7 +261,7 @@ cancel:
   worldedit_cancel_reason_max_entities: 实体过多
   worldedit_cancel_reason_max_iterations: 最大重复次数
   worldedit_cancel_reason_no_region: 无允许区域 (请使用 /wea 绕过限制，或在 config.yml 中禁用 `region-restrictions`)
-  worldedit_failed_load_chunk: '&c已跳过区块载入: &7%s0;%s1&c。请尝试增加区块等待时长'
+  worldedit_failed_load_chunk: '已跳过区块载入: %s0;%s1。请尝试增加区块等待时长'
   worldedit_cancel_reason_outside_level: 世界外
   worldedit_cancel_reason_outside_region: 允许区域外 (请使用 /wea 绕过限制，或在 config.yml 中禁用 `region-restrictions`)
 navigation:
@@ -287,36 +287,36 @@ selection:
   sel_max: '可选择至多 %s0 个点。'
   sel_fuzzy: '模糊选择器: 左击选择所有可能的方块，右击添加。要选择气腔，请使用 //pos1。'
   sel_convex_polyhedral: '凸多面体选择器: 左击选择首个顶点，右击选择更多顶点。'
-  sel_list: '要查看选择类型列表，请使用: &c//sel list'
+  sel_list: '要查看选择类型列表，请使用: //sel list'
   sel_modes: '请选择下列模式之一:'
 tips:
-  tip_sel_list: '提示: 请使用 &c//sel list &7查看不同的选择模式'
+  tip_sel_list: '提示: 请使用 //sel list 查看不同的选择模式'
   tip_select_connected: '提示: 请使用 //sel fuzzy 选择所有连接为一体的方块'
-  tip_set_pos1: '提示: 请使用 &c//set pos1 &7将点 1 作为样式'
-  tip_farwand: '提示: 请使用 &c//farwand &7选择远方的点'
-  tip_lazycut: '&7提示: 使用 &c//lazycut &7更为安全'
-  tip_fast: '&7提示: 请使用 &c//fast &7在不撤销的情况下快速放置方块'
-  tip_cancel: '&7提示: 您可使用 &c//cancel &7取消进行中的编辑'
-  tip_mask: '&7提示: 请使用 &c/gmask &7设置全局终点蒙版'
-  tip_mask_angle: '提示: 请使用 &c//replace /[-20][-3] bedrock &7替换 3-20 个方块的上坡'
-  tip_set_linear: '&7提示: 请使用 &c//set #l3d[wood,bedrock] &7线性放置方块'
-  tip_surface_spread: '&7提示: 请使用 &c//set #surfacespread[5][0][5][#existing] &7进行平面展开'
-  tip_set_hand: '&7提示: 请使用 &c//set hand &7来使用您的手'
-  tip_replace_id: '&7提示: 请使用 &c//replace woodenstair #编号[石台阶] &7来仅替换方块编号'
-  tip_replace_light: '提示: 请使用 &c//replace #brightness[1][15] 0 &7来移除光源'
+  tip_set_pos1: '提示: 请使用 //set pos1 将点 1 作为样式'
+  tip_farwand: '提示: 请使用 //farwand 选择远方的点'
+  tip_lazycut: '提示: 使用 //lazycut 更为安全'
+  tip_fast: '提示: 请使用 //fast 在不撤销的情况下快速放置方块'
+  tip_cancel: '提示: 您可使用 //cancel 取消进行中的编辑'
+  tip_mask: '提示: 请使用 /gmask 设置全局终点蒙版'
+  tip_mask_angle: '提示: 请使用 //replace /[-20][-3] bedrock 替换 3-20 个方块的上坡'
+  tip_set_linear: '提示: 请使用 //set #l3d[wood,bedrock] 线性放置方块'
+  tip_surface_spread: '提示: 请使用 //set #surfacespread[5][0][5][#existing] 进行平面展开'
+  tip_set_hand: '提示: 请使用 //set hand 来使用您的手'
+  tip_replace_id: '提示: 请使用 //replace woodenstair #编号[石台阶] 来仅替换方块编号'
+  tip_replace_light: '提示: 请使用 //replace #brightness[1][15] 0 来移除光源'
   tip_tab_complete: '提示: 替换命令支持 Tab 键补全功能'
-  tip_flip: '提示: 请使用 &c//flip &7创建镜像'
-  tip_deform: '提示: 请使用 &c//deform &7重新塑形'
-  tip_transform: '提示: 请使用 &c//gtransform &7设置变形'
-  tip_copypaste: '提示: 请使用 &c//br copypaste &7在点击时粘贴'
-  tip_source_mask: '提示: 请使用 &c/gsmask <蒙版> &7来设置源蒙版'
-  tip_replace_marker: '提示: 请使用 &c//replace wool #fullcopy &7使用剪切板完全替换方块'
-  tip_paste: '提示: 请使用 &c//paste &7放置方块'
+  tip_flip: '提示: 请使用 //flip 创建镜像'
+  tip_deform: '提示: 请使用 //deform 重新塑形'
+  tip_transform: '提示: 请使用 //gtransform 设置变形'
+  tip_copypaste: '提示: 请使用 //br copypaste 在点击时粘贴'
+  tip_source_mask: '提示: 请使用 /gsmask <蒙版> 来设置源蒙版'
+  tip_replace_marker: '提示: 请使用 //replace wool #fullcopy 使用剪切板完全替换方块'
+  tip_paste: '提示: 请使用 //paste 放置方块'
   tip_lazycopy: '提示: lazycopy 的速度更为快捷'
-  tip_download: '提示: 来试试 &c//download'
-  tip_rotate: '提示: 请使用 &c//rotate &7确定方位'
-  tip_copy_pattern: '提示: 请使用 &c#copy &7来作为样式使用'
-  tip_regen_0: '提示: 使用 &c/regen [生态群系] &7来重新生成生态群系'
-  tip_regen_1: '提示: 使用 &c/regen [生态群系] [种子] &7来重新生成生态群系'
-  tip_biome_pattern: '提示: &c#biome[forest]&7 样式可用于任意命令中'
+  tip_download: '提示: 来试试 //download'
+  tip_rotate: '提示: 请使用 //rotate 确定方位'
+  tip_copy_pattern: '提示: 请使用 #copy 来作为样式使用'
+  tip_regen_0: '提示: 使用 /regen [生态群系] 来重新生成生态群系'
+  tip_regen_1: '提示: 使用 /regen [生态群系] [种子] 来重新生成生态群系'
+  tip_biome_pattern: '提示: #biome[forest] 样式可用于任意命令中'
   tip_biome_mask: '提示: 您可使用 `$jungle` 蒙版来限定生态群系'

worldedit-core/src/main/resources/de/message.yml

@@ -1,71 +1,71 @@
 # Updated by NotMyFault, 11.04.2019
 info:
-  prefix: '&8(&4&lFAWE&8)&r&7'
-  schematic_pasting: '&7Die Schematic wird eingefügt. Dies kann nicht rückgängig gemacht
+  prefix: '(FAWE)'
+  schematic_pasting: 'Die Schematic wird eingefügt. Dies kann nicht rückgängig gemacht
     werden.'
-  updated_lighting_selection: '&7Das Licht wird in %s0 Chunks aktualisiert. (Es kann
+  updated_lighting_selection: 'Das Licht wird in %s0 Chunks aktualisiert. (Es kann
     einige Sekunden dauern, bis die Pakete gesendet werden.)'
-  set_region: '&7Markierung wurde auf aktuelle WorldEdit Region übertragen.'
-  worldedit_command_limit: '&7Bitte warte, bis deine momentane Aktion fertig gestellt
+  set_region: 'Markierung wurde auf aktuelle WorldEdit Region übertragen.'
+  worldedit_command_limit: 'Bitte warte, bis deine momentane Aktion fertig gestellt
     wurde.'
-  worldedit_delayed: '&7Bitte warte, während deine aktuelle WorldEdit Aktion durchgeführt
+  worldedit_delayed: 'Bitte warte, während deine aktuelle WorldEdit Aktion durchgeführt
     wird..'
-  worldedit_run: '&7Entschuldige die Verzögerung. Nun führen wir folgende Aktion von
+  worldedit_run: 'Entschuldige die Verzögerung. Nun führen wir folgende Aktion von
     dir aus: %s'
-  worldedit_complete: '&7WorldEdit Aktion fertiggestellt..'
-  require_selection_in_mask: '&7%s deiner Auswahl ist nicht innerhalb deiner Maske.
+  worldedit_complete: 'WorldEdit Aktion fertiggestellt..'
+  require_selection_in_mask: '%s deiner Auswahl ist nicht innerhalb deiner Maske.
     Du darfst nur innerhalb erlaubter Regionen Veränderungen durchführen.'
-  worldedit_volume: '&7Du kannst keine %current% verändern. Die maximale Anzahl an
+  worldedit_volume: 'Du kannst keine %current% verändern. Die maximale Anzahl an
     Blöcken die du verändern darfst ist %max%.'
-  worldedit_iterations: '&7Du kannst %current% nicht wiederholen. Die maximale Anzahl an erlaubten Wiederholungen ist %max%.'
-  worldedit_unsafe: '&7Der Zugang zu diesem Befehl wurde verboten.'
-  worldedit_dangerous_worldedit: '&cFAWE führt unsicher WorldEdit Aktionen aus! Position:
+  worldedit_iterations: 'Du kannst %current% nicht wiederholen. Die maximale Anzahl an erlaubten Wiederholungen ist %max%.'
+  worldedit_unsafe: 'Der Zugang zu diesem Befehl wurde verboten.'
+  worldedit_dangerous_worldedit: 'FAWE führt unsicher WorldEdit Aktionen aus! Position:
     %s0 Spielername: %s1'
-  worldedit_bypassed: '&7Beschränkungen werden nun ignoriert.'
-  worldedit_unmasked: '&6Deine WorldEdit Beschränkungen sind nun aufgehoben.'
-  worldedit_restricted: '&6Deine WorldEdit Beschränkungen sind nun aktiv.'
+  worldedit_bypassed: 'Beschränkungen werden nun ignoriert.'
+  worldedit_unmasked: 'Deine WorldEdit Beschränkungen sind nun aufgehoben.'
+  worldedit_restricted: 'Deine WorldEdit Beschränkungen sind nun aktiv.'
   worldedit_oom_admin: |-
-    &cMögliche Optionen:
-    &8 - &7//fast
-    &8 - &7Kleinere Aktionen ausführen
-    &8 - &7Mehr Arbeitsspeicher zuweisen
-    &8 - &7Diese Meldungen deaktivieren
+    Mögliche Optionen:
+     - //fast
+     - Kleinere Aktionen ausführen
+     - Mehr Arbeitsspeicher zuweisen
+     - Diese Meldungen deaktivieren
   compressed: WorldEdit Verlauf komprimiert. Um ~ %s0b reduziert (%s1x kleiner)
   action_complete: Aktion fertiggestellt in %s0 Sekunden
-  lighting_propogate_selection: '&7Licht wurde berechnet in %s0 Chunks. (Info: Um
+  lighting_propogate_selection: 'Licht wurde berechnet in %s0 Chunks. (Info: Um
     Licht zu entfernen nutze //removelight)'
-  worldedit_toggle_tips_on: '&7WorldEdit Tipps deaktiviert.'
-  worldedit_toggle_tips_off: '&7WorldEdit Tipps aktiviert.'
+  worldedit_toggle_tips_on: 'WorldEdit Tipps deaktiviert.'
+  worldedit_toggle_tips_off: 'WorldEdit Tipps aktiviert.'
   file_deleted: '%s0 wurde gelöscht.'
 error:
-  worldedit_extend: '&cDeine WorldEdit Aktion überschreitet die erlaubte Region'
-  command_syntax: '&cBenutzung: &7%s0'
-  no_perm: '&cDir fehlt die Berechtigung: %s0'
-  setting_disable: '&cFehlende Einstellung: %s0'
-  schematic_not_found: '&cSchematic nicht gefunden: &7%s0'
-  no_region: '&cDu hast keine aktive WorldEdit Markierung'
-  no_mask: '&cDu hast keine Maske gesetzt'
-  not_player: '&cDieser Befehl kann nur von Spielern ausgeführt werden!'
-  player_not_found: '&cSpieler nicht gefunden:&7 %s0'
+  worldedit_extend: 'Deine WorldEdit Aktion überschreitet die erlaubte Region'
+  command_syntax: 'Benutzung: %s0'
+  no_perm: 'Dir fehlt die Berechtigung: %s0'
+  setting_disable: 'Fehlende Einstellung: %s0'
+  schematic_not_found: 'Schematic nicht gefunden: %s0'
+  no_region: 'Du hast keine aktive WorldEdit Markierung'
+  no_mask: 'Du hast keine Maske gesetzt'
+  not_player: 'Dieser Befehl kann nur von Spielern ausgeführt werden!'
+  player_not_found: 'Spieler nicht gefunden: %s0'
   oom: |-
-    &8[&cKritisch&8] &cWenig Arbeitsspeicher frei (< 1%). FAWE wird folgendes machen:
-    &8 - &7Alle Aktionen terminieren
-    &8 - &7Vergangene Bearbeitungen vergessen
-    &8 - &7Alle unwichtigen Chunks entladen
-    &8 - &7Alle Entities töten
-    &8 - &7Unnötig verwendeten Speicher freigeben.
-    &cIgnoriere diese Meldung, wenn du versuchst den Server zu crashen.
-    &7Note: Wenig freier Speicher kann unter Umständen wegen WE passiert sein.
-  worldedit_some_fails: '&c%s0 Blöcke wurden nicht platziert, da sie außerhalb der
+    [Kritisch] Wenig Arbeitsspeicher frei (< 1%). FAWE wird folgendes machen:
+     - Alle Aktionen terminieren
+     - Vergangene Bearbeitungen vergessen
+     - Alle unwichtigen Chunks entladen
+     - Alle Entities töten
+     - Unnötig verwendeten Speicher freigeben.
+    Ignoriere diese Meldung, wenn du versuchst den Server zu crashen.
+    Note: Wenig freier Speicher kann unter Umständen wegen WE passiert sein.
+  worldedit_some_fails: '%s0 Blöcke wurden nicht platziert, da sie außerhalb der
     erlaubten Region sind.'
-  worldedit_some_fails_blockbag: '&cFehlende Blöcke: %s0'
+  worldedit_some_fails_blockbag: 'Fehlende Blöcke: %s0'
   web_unauthorized: 'Es sind nur Links vom konfigurierten Webhost erlaubt: %s0'
   brush_not_found: '&Verfügbare Brushes: %s0'
-  brush_incompatible: '&cBrush ist nicht kompatibel mit dieser Version'
+  brush_incompatible: 'Brush ist nicht kompatibel mit dieser Version'
   block_not_allowed: 'Du darfst diesen Block nicht benutzen:'
 web:
   generating_link: Lade %s hoch, bitte warten...
-  generating_link_failed: '&cErstellung eines Download-Links fehlgeschlagen!'
+  generating_link_failed: 'Erstellung eines Download-Links fehlgeschlagen!'
   download_link: '%s'
 worldedit:
   general:
@@ -151,8 +151,8 @@ worldedit:
     brush_transform: Brush-Transformation gesetzt
     brush_material: Brush-Material gesetzt
     brush_try_other: |-
-      &cFAWE verfügt über andere, passendere Brushes. z.B.:
-      &8 - &7//br height [radius=5] [#clipboard|file=null] [rotation=0] [yscale=1.00]
+      FAWE verfügt über andere, passendere Brushes. z.B.:
+       - //br height [radius=5] [#clipboard|file=null] [rotation=0] [yscale=1.00]
     brush_none: Du hältst kein Tool in der Hand, das man als Brush verwenden kann!
     brush_source_mask_disabled: Brush Quell-Maske deaktiviert
     brush_source_mask: Brush Quell-Maske gesetzt
@@ -175,8 +175,8 @@ worldedit:
     rollback_element: annulliere %s0
   tool:
     tool_inspect: Inpektions-Tool an %s0 gebunden.
-    tool_inspect_info: '&7%s0 änderte %s1 zu %s2 %s3 zuvor'
-    tool_inspect_info_footer: '&6Total: &7%s0 Änderungen'
+    tool_inspect_info: '%s0 änderte %s1 zu %s2 %s3 zuvor'
+    tool_inspect_info_footer: 'Total: %s0 Änderungen'
     tool_none: Tool vom aktuellen Item entfernt.
     tool_info: Info-Tool gebunden an %s0.
     tool_tree: Tree-Tool gebunden an %s0.
@@ -204,16 +204,16 @@ worldedit:
     schematic_page: Seite muss %s sein.
     schematic_none: Keine Schematics gefunden.
     schematic_list: 'Verfügbare Schematics (Dateiname: Format) [%s0/%s1]:'
-    schematic_list_elem: '&8 - &a%s0 &8- &7%s1'
-    schematic_prompt_clear: '&7Meintest du &c%s0 &7um deine Zwischenablage zu leeren?'
+    schematic_list_elem: ' - %s0 - %s1'
+    schematic_prompt_clear: 'Meintest du %s0 um deine Zwischenablage zu leeren?'
     schematic_show: |-
-      &7Displaying &a%s0&7 Schematics von &a%s1&7:
-      &8 - &aLinksklick &7a um der Zwischenablage hinzuzufügen
-      &8 - &aRechtsklick &7um etwas deiner Multi-Zwischenablage hinzuzufügen
-      &8 - &7Benutze &a%s2&7 um zur richtigen Welt zurückzukehren
-    schematic_move_exists: '&c%s0 existiert bereits'
-    schematic_move_success: '&a%s0 -> %s1'
-    schematic_move_failed: '&a%s0 wurde nicht bewegt: %s1'
+      Displaying %s0 Schematics von %s1:
+       - Linksklick a um der Zwischenablage hinzuzufügen
+       - Rechtsklick um etwas deiner Multi-Zwischenablage hinzuzufügen
+       - Benutze %s2 um zur richtigen Welt zurückzukehren
+    schematic_move_exists: '%s0 existiert bereits'
+    schematic_move_success: '%s0 -> %s1'
+    schematic_move_failed: '%s0 wurde nicht bewegt: %s1'
   clipboard:
     clipboard_cleared: Zwischenablage geleert
     clipboard_invalid_format: 'Unbekanntes Zwischenablage Format:  %s0'
@@ -260,34 +260,34 @@ worldedit:
     timezone_set: 'Zeitzone für diese Sitzung gesetzt auf: %s0'
     timezone_display: 'Aktuelle Zeit in dieser Zeitzone:  %s0'
   navigation:
-    navigation_wand_error: '&cNichts zu durchqueren'
+    navigation_wand_error: 'Nichts zu durchqueren'
   anvil:
     world_is_loaded: Die Welt sollte während er Ausführung nicht in Benutzung sein.
       Entlade die Welt oder überschreibe diese mit -f (vorher speichern)
   help:
-    command_clarifying_bracket: '&7Klammer für&c%s0 wurde hinzugefügt'
-    help_suggest: '&7%s0 konnte nicht gefunden werden. Versuche &c%s1 &7'
+    command_clarifying_bracket: 'Klammer für%s0 wurde hinzugefügt'
+    help_suggest: '%s0 konnte nicht gefunden werden. Versuche %s1 '
     help_header_categories: Befehlstypen
     help_header_subcommands: Unterbefehle
-    help_header_command: '&cHilfe für: &7%s0'
-    help_item_allowed: '&a%s0&8 - &7%s1'
-    help_item_denied: '&c%s0&8 - &7%s1'
+    help_header_command: 'Hilfe für: %s0'
+    help_item_allowed: '%s0 - %s1'
+    help_item_denied: '%s0 - %s1'
     help_header: 'Hilfe: Seite %s0/%s1'
-    help_footer: '&7Wiki: https://git.io/vSKE5'
+    help_footer: 'Wiki: https://git.io/vSKE5'
   cycler:
     block_cycler_cannot_cycle: Dieser Block kann mit cycler nicht verändert werden
     block_cycler_limit: Du hast dein maximales Block-Change Limit erreicht.
-    block_cycler_no_perm: '&cDu hast keine Rechte diesen Block mit dem cycler zu bearbeiten'
+    block_cycler_no_perm: 'Du hast keine Rechte diesen Block mit dem cycler zu bearbeiten'
   scripting:
-    scripting_no_perm: '&cDu hast keine Rechte dieses CraftScript auszuführen'
+    scripting_no_perm: 'Du hast keine Rechte dieses CraftScript auszuführen'
     scripting_cs: Nutze /cs mit einen Script Namen
     scripting_error: Ein Fehler trat auf beim Asuführen eines Scripts.
 progress:
   progress_message: '[ Zwischenspeicher: %s0 | Erledigt: %s1 ]'
   progress_finished: '[ Fertiggestellt! ]'
 cancel:
-  worldedit_cancel_count: '&c%s0 Veränderungen abgebrochen.'
-  worldedit_cancel_reason: '&cDeine WorldEdit Aktion wurde abgebrochen:&7 %s0&c.'
+  worldedit_cancel_count: '%s0 Veränderungen abgebrochen.'
+  worldedit_cancel_reason: 'Deine WorldEdit Aktion wurde abgebrochen: %s0.'
   worldedit_cancel_reason_manual: Manueller Abbruch
   worldedit_cancel_reason_low_memory: Zu wenig Speicher
   worldedit_cancel_reason_max_changes: Zu viele Blöcke bearbeitet
@@ -296,10 +296,10 @@ cancel:
   worldedit_cancel_reason_max_entities: Zu viele Entities
   worldedit_cancel_reason_max_iterations: Maximale Wiederholungen
   worldedit_cancel_reason_no_region: Keine erlaubte Region (Ignorieren mit /wea)
-  worldedit_failed_load_chunk: '&cÜberspringe das Laden von Chunk: &7%s0;%s1&c. Versuche
+  worldedit_failed_load_chunk: 'Überspringe das Laden von Chunk: %s0;%s1. Versuche
     chunk-wait zu erhöhen.'
-  worldedit_cancel_reason_confirm: '&7Deine Selektion ist zu groß (%s0 -> %s1). Benutze
-    &c//confirm &7um &c%s2 auszuführen'
+  worldedit_cancel_reason_confirm: 'Deine Selektion ist zu groß (%s0 -> %s1). Benutze
+    //confirm um %s2 auszuführen'
   worldedit_cancel_reason_outside_level: Außerhalb der Welt
   worldedit_cancel_reason_outside_region: Außerhalb erlaubter Region (Umgehe es mit
     /wea, oder deaktiviere `region-restrictions` in der config.yml)
@@ -329,50 +329,50 @@ selection:
     zum hinzufügen'
   sel_convex_polyhedral: 'Convexe Polyeder Auswahl: Linksklick=Erster Vertex; Rechtsklick,
     um mehr hinzuzufügen.'
-  sel_list: Für eine Liste der Selektoren nutze:&c //sel
+  sel_list: 'Für eine Liste der Selektoren nutze: //sel'
   sel_modes: 'Wähle einen der unten aufgelisteten Modi:'
 tips:
   tip_cancel: 'Tipp: Du kannst eine Aktion mit `//cancel` abbrechen'
   tip_download: 'Tipp: Du kannst deine Zwischenablage mit `//download` herunterladen'
-  tip_sel_list: 'Tipp: Liste die verschiedenen Selektoren auf mit &c//sel list'
-  tip_select_connected: 'Tipp: Wähle alle verbundenen Blöcke mit &c//sel fuzzy'
-  tip_set_pos1: 'Tipp: Nutze Position1 als Muster &c//set pos1'
-  tip_farwand: 'Tipp: Markiere entfernte Blöcke mit &c//farwand'
-  tip_fast: '&7Tipp: Platziere schnell und ohne Undo-Historie &c//fast'
-  tip_mask: '&7Tipp: Setze eine Globale Zielmaske mit &c/gmask'
-  tip_mask_angle: 'Tipp: Ersetze aufwärts Steigungen von 3-20 Blöcken mit&c //replace
+  tip_sel_list: 'Tipp: Liste die verschiedenen Selektoren auf mit //sel list'
+  tip_select_connected: 'Tipp: Wähle alle verbundenen Blöcke mit //sel fuzzy'
+  tip_set_pos1: 'Tipp: Nutze Position1 als Muster //set pos1'
+  tip_farwand: 'Tipp: Markiere entfernte Blöcke mit //farwand'
+  tip_fast: 'Tipp: Platziere schnell und ohne Undo-Historie //fast'
+  tip_mask: 'Tipp: Setze eine Globale Zielmaske mit /gmask'
+  tip_mask_angle: 'Tipp: Ersetze aufwärts Steigungen von 3-20 Blöcken mit //replace
     /-20:-3 bedrock'
-  tip_set_linear: '&7Tipp: Setze Blöcke linear mit&c //set #l3d:wood,bedrock'
-  tip_surface_spread: '&7Tipp: Streue einen flachen Untergrund mit&c //set #surfacespread:5:0:5:#existing'
-  tip_set_hand: '&7Tipp: Setze das Item in deiner Hand mit&c//set hand'
-  tip_replace_id: '&7Tipp: Ersetze nur die Block-ID:&c //replace woodenstair #id:cobblestair'
-  tip_replace_light: 'Tipp: Entferne Licht-Quellen mit&c //replace #brightness:1:15
+  tip_set_linear: 'Tipp: Setze Blöcke linear mit //set #l3d:wood,bedrock'
+  tip_surface_spread: 'Tipp: Streue einen flachen Untergrund mit //set #surfacespread:5:0:5:#existing'
+  tip_set_hand: 'Tipp: Setze das Item in deiner Hand mit//set hand'
+  tip_replace_id: 'Tipp: Ersetze nur die Block-ID: //replace woodenstair #id:cobblestair'
+  tip_replace_light: 'Tipp: Entferne Licht-Quellen mit //replace #brightness:1:15
     0'
   tip_tab_complete: 'Tipp: Der Replace-Befehl unterstützt Tab-Vervollständigung'
-  tip_flip: '&7Tipp: Du kannst mit &c//flip &7spiegeln'
-  tip_deform: 'Tipp: Forme um mit &c//deform'
-  tip_transform: 'Tipp: Platziere eine Umformung mit &c//gtransform'
-  tip_copypaste: 'Tipp: Füge durch Klick ein mit &c//br copypaste'
-  tip_source_mask: 'Tipp: Setze eine Quell-Maske &c/gsmask <mask>&7'
+  tip_flip: 'Tipp: Du kannst mit //flip spiegeln'
+  tip_deform: 'Tipp: Forme um mit //deform'
+  tip_transform: 'Tipp: Platziere eine Umformung mit //gtransform'
+  tip_copypaste: 'Tipp: Füge durch Klick ein mit //br copypaste'
+  tip_source_mask: 'Tipp: Setze eine Quell-Maske /gsmask <mask>'
   tip_replace_marker: 'Tipp: Ersetze einen Block mit deiner vollständigen Zwischenablage
-    mit &c//replace wool #fullcopy'
-  tip_paste: 'Tipp: Füge deine Zwischeneinlage mit &c//paste ein'
+    mit //replace wool #fullcopy'
+  tip_paste: 'Tipp: Füge deine Zwischeneinlage mit //paste ein'
   tip_lazycopy: 'Tipp: lazycopy ist schneller'
-  tip_rotate: 'Tipp: Ausrichten mit &c//rotate'
-  tip_copy_pattern: 'Tipp: Um ein Muster zu verwenden verwende &c#copy'
-  tip_lazycut: '&7Tipp: Es ist sicherer den Befehl &c//lazycut &7zu verwenden.'
+  tip_rotate: 'Tipp: Ausrichten mit //rotate'
+  tip_copy_pattern: 'Tipp: Um ein Muster zu verwenden verwende #copy'
+  tip_lazycut: 'Tipp: Es ist sicherer den Befehl //lazycut zu verwenden.'
   tip_regen_0: 'Tipp: Benutze ein Biom mit /regen [biome]'
   tip_regen_1: 'Tipp: Benutzte einen Seed mit /regen [biome] [seed]'
-  tip_biome_pattern: 'Tipp: Das &c#biome[forest]&7 Muster kann in jedem Befehl genutzt
+  tip_biome_pattern: 'Tipp: Das #biome[forest] Muster kann in jedem Befehl genutzt
     werden'
   tip_biome_mask: 'Tipp: Beschränke ein Biom mit der `$jungle` Maske'
   tip_discord: Du benötigst Hilfe mit FAWE? https://discord.gg/ngZCzbU
-  tip_replace_regex: '&7Tipp: Ersetze mit regex:&c //replace .*_log <pattern>'
-  tip_replace_regex_2: '&7Tipp: Ersetze mit regex:&c //replace .*stairs[facing=(north|south)]
+  tip_replace_regex: 'Tipp: Ersetze mit regex: //replace .*_log <pattern>'
+  tip_replace_regex_2: 'Tipp: Ersetze mit regex: //replace .*stairs[facing=(north|south)]
     <pattern>'
-  tip_replace_regex_3: '&7Tipp: Ersetze mit den folgenden Operatoren:&c //replace
+  tip_replace_regex_3: 'Tipp: Ersetze mit den folgenden Operatoren: //replace
     water[level>2] sand'
-  tip_replace_regex_4: '&7Tipp: Ersetze mit den folgenden Operatoren:&c //replace
+  tip_replace_regex_4: 'Tipp: Ersetze mit den folgenden Operatoren: //replace
     true *[waterlogged=false]'
-  tip_replace_regex_5: '&7Tipp: Ersetze mit den folgenden Operatoren:&c //replace
+  tip_replace_regex_5: 'Tipp: Ersetze mit den folgenden Operatoren: //replace
     true *[level-=1]'

worldedit-core/src/main/resources/es/message.yml

@@ -1,66 +1,66 @@
 info:
-  prefix: '&8(&4&lFAWE&8)&r&7'
+  prefix: '(FAWE)'
   file_deleted: '%s0 ha sido eliminado.'
-  schematic_pasting: '&7La schematic está peganda. Esto no se puede deshacer.'
-  lighting_propogate_selection: '&7La iluminación se ha propagado en %s0 chunks. (Nota:
+  schematic_pasting: 'La schematic está peganda. Esto no se puede deshacer.'
+  lighting_propogate_selection: 'La iluminación se ha propagado en %s0 chunks. (Nota:
     Para quitar el uso de la luz //removelight)'
-  updated_lighting_selection: '&7La iluminación se ha actualizado en %s0 trozos. (Puede
+  updated_lighting_selection: 'La iluminación se ha actualizado en %s0 trozos. (Puede
     tardar un segundo en enviar los paquetes)'
-  set_region: '&7Selección ajustada a su región permitida actual'
-  worldedit_command_limit: '&7Espere hasta que se complete la acción actual'
-  worldedit_delayed: '&7Espere mientras procesamos su acción ...'
-  worldedit_run: '&7Perdón por el retraso. Ahora ejecutando: %s0'
-  worldedit_complete: '&7Editar completado.'
-  require_selection_in_mask: '&7%s de su selección no está dentro de su máscara. Tú
+  set_region: 'Selección ajustada a su región permitida actual'
+  worldedit_command_limit: 'Espere hasta que se complete la acción actual'
+  worldedit_delayed: 'Espere mientras procesamos su acción ...'
+  worldedit_run: 'Perdón por el retraso. Ahora ejecutando: %s0'
+  worldedit_complete: 'Editar completado.'
+  require_selection_in_mask: '%s de su selección no está dentro de su máscara. Tú
     sólo puede realizar ediciones dentro de las regiones permitidas.'
-  worldedit_volume: '&7No puede seleccionar un volumen de %current%. El volumen máximo
+  worldedit_volume: 'No puede seleccionar un volumen de %current%. El volumen máximo
     que puede modificar es %max%.'
-  worldedit_iterations: '&7No se puede iterar %current% times. El número máximo de
+  worldedit_iterations: 'No se puede iterar %current% times. El número máximo de
     iteraciones permitidas es %max%.'
-  worldedit_unsafe: '&7Acceso a ese comando ha sido bloqueado'
-  worldedit_dangerous_worldedit: '&4Proceso de edición insegura en %s0 por %s1'
-  worldedit_toggle_tips_on: '&7Desabilitado FAWE tips.'
-  worldedit_toggle_tips_off: '&7Habilitado FAWE tips.'
-  worldedit_bypassed: '&7Consejos FAWE habilitados.'
-  worldedit_unmasked: '&6Las ediciones de FAWE ya no están restringidas.'
-  worldedit_restricted: '&6Vos ediciones de FAWE están restringidas ahora.'
+  worldedit_unsafe: 'Acceso a ese comando ha sido bloqueado'
+  worldedit_dangerous_worldedit: 'Proceso de edición insegura en %s0 por %s1'
+  worldedit_toggle_tips_on: 'Desabilitado FAWE tips.'
+  worldedit_toggle_tips_off: 'Habilitado FAWE tips.'
+  worldedit_bypassed: 'Consejos FAWE habilitados.'
+  worldedit_unmasked: 'Las ediciones de FAWE ya no están restringidas.'
+  worldedit_restricted: 'Vos ediciones de FAWE están restringidas ahora.'
   worldedit_oom_admin: |-
-    &cOpciones Posibles:
-    &8 - &7//fast
-    &8 - &7Para ediciones más pequeñas
-    &8 - &7Asignar más memoria
-    &8 - &7Desabilitado `max-memory-percent`
+    Opciones Posibles:
+     - //fast
+     - Para ediciones más pequeñas
+     - Asignar más memoria
+     - Desabilitado `max-memory-percent`
   compressed: Historial comprimido. Guardado ~ %s0b (%s1x menor)
   action_complete: Acción completada en %s0 segundos
 error:
-  worldedit_extend: '&4Es posible que tu edición se haya extendido fuera de tu región
+  worldedit_extend: 'Es posible que tu edición se haya extendido fuera de tu región
     permitida.'
   web_unauthorized: 'Solo se permiten enlaces desde el host web configurado: %s0'
-  command_syntax: '&4Usage: &7%s0'
-  no_perm: '&4Está faltando el nodo de permiso: %s0'
-  setting_disable: '&4Pregunta de ajuste: %s0'
-  brush_not_found: '&4Brushes disponibles: %s0'
-  brush_incompatible: '&cBrush no compatible con esta versión'
-  schematic_not_found: '&4Schematic no encontrada: &7%s0'
-  no_region: '&4No tienes región actual permitida'
-  no_mask: '&4No tienes ningún conjunto de máscara actual'
-  not_player: '&4Usted debe ser un jugador para realizar esta acción!'
-  player_not_found: '&4Jugador no encontrado:&7 %s0'
+  command_syntax: 'Usage: %s0'
+  no_perm: 'Está faltando el nodo de permiso: %s0'
+  setting_disable: 'Pregunta de ajuste: %s0'
+  brush_not_found: 'Brushes disponibles: %s0'
+  brush_incompatible: 'Brush no compatible con esta versión'
+  schematic_not_found: 'Schematic no encontrada: %s0'
+  no_region: 'No tienes región actual permitida'
+  no_mask: 'No tienes ningún conjunto de máscara actual'
+  not_player: 'Usted debe ser un jugador para realizar esta acción!'
+  player_not_found: 'Jugador no encontrado: %s0'
   oom: |-
-    &8[&4Critical&8] &4Detected baja memoria i.e. < 1%. Tomaremos las siguientes acciones:
-    &8 - &7Terminate bloqueamos la colocación
-    &8 - &7Borrar Historia de WE
-    &8 - &7Unload shunk no esenciales
-    &8 - &7Matar entidades
-    &8 - &7La recogida de basura
-    &4Ignore esto si intenta bloquear el servidor.
-    &7Nota: Es probable que la memoria baja (pero no necesariamente) sea causada por WE
-  worldedit_some_fails: '&4%s0 bloques fueron''t pcolocado porque estaban fuera de
+    '[Critical] Detected baja memoria i.e. < 1%. Tomaremos las siguientes acciones:'
+     - Terminate bloqueamos la colocación
+     - Borrar Historia de WE
+     - Unload shunk no esenciales
+     - Matar entidades
+     - La recogida de basura
+    Ignore esto si intenta bloquear el servidor.
+    Nota: Es probable que la memoria baja (pero no necesariamente) sea causada por WE
+  worldedit_some_fails: '%s0 bloques fueron''t pcolocado porque estaban fuera de
     su región permitida.'
-  worldedit_some_fails_blockbag: '&4Bloques perdidos: %s0'
+  worldedit_some_fails_blockbag: 'Bloques perdidos: %s0'
 web:
   generating_link: Subiendo %s, por favor espere...
-  generating_link_failed: '&4Fallo al generar el enlace de descarga!'
+  generating_link_failed: 'Fallo al generar el enlace de descarga!'
   download_link: '%s'
 worldedit:
   general:
@@ -122,7 +122,7 @@ worldedit:
     selection_shift: Región desplazada
     selection_cleared: Selección borrada
   navigation:
-    navigation_wand_error: '&4Nada por lo que pasar'
+    navigation_wand_error: 'Nada por lo que pasar'
   anvil:
     world_is_loaded: El mundo no debe estar en uso durante la ejecución. Descargue
       el mundo, o utilice el uso -f para anular (guardar primero)
@@ -137,8 +137,8 @@ worldedit:
     brush_target_offset_set: Establece el desplazamiento de destino en %s0
     brush_equipped: Pincel Equipado %s0
     brush_try_other: |-
-      &4Hay otros pinceles más adecuados e.g.
-      &8 - &7//br height [radius=5] [#clipboard|file=null] [rotation=0] [yscale=1.00]
+      Hay otros pinceles más adecuados e.g.
+       - //br height [radius=5] [#clipboard|file=null] [rotation=0] [yscale=1.00]
     brush_copy: Haga clic con el botón izquierdo en la base de un objeto para copiar,
       haga clic derecho para pegar. Incrementar el radio del pincel si es necesario.
     brush_height_invalid: Archivo de mapa de altura no válido (%s0)
@@ -165,8 +165,8 @@ worldedit:
     rollback_element: Deshacer %s0
   tool:
     tool_inspect: Inspecciona la herramienta enlazada a %s0.
-    tool_inspect_info: '&7%s0 cambiado %s1 a %s2 %s3 hace'
-    tool_inspect_info_footer: '&6Total: &7%s0 changes'
+    tool_inspect_info: '%s0 cambiado %s1 a %s2 %s3 hace'
+    tool_inspect_info_footer: 'Total: %s0 changes'
     tool_none: Herramienta desvinculada de su elemento actual.
     tool_info: Herramienta de información vinculada a %s0.
     tool_tree: Herramienta de árbol vinculada a %s0.
@@ -204,16 +204,16 @@ worldedit:
     schematic_page: La página debe ser %s
     schematic_none: No se han encontrado archivos.
     schematic_list: 'Archivos disponibles (Filename: Format) [%s0/%s1]:'
-    schematic_list_elem: '&8 - &a%s0 &8- &7%s1'
-    schematic_prompt_clear: '&7Es posible que desee utilizar &c%s0 &7para borrar su actual primera'
+    schematic_list_elem: ' - %s0 - %s1'
+    schematic_prompt_clear: 'Es posible que desee utilizar %s0 para borrar su actual primera'
     schematic_show: |-
-      &7Mostrando &a%s0&7 esquemas de &a%s1&7:
-      &8 - &aClick izquierdo &7Una estructura para configurar tu portapapeles
-      &8 - &aBotón derecho del ratón &7para agregar una estructura a tu multipartículas
-      &8 - &7Utilizar &a%s2&7 para volver al mundo
-    schematic_move_exists: '&c%s0 ya existe'
-    schematic_move_success: '&a%s0 -> %s1'
-    schematic_move_failed: '&a%s0 no movido: %s1'
+      Mostrando %s0 esquemas de %s1:
+       - Click izquierdo Una estructura para configurar tu portapapeles
+       - Botón derecho del ratón para agregar una estructura a tu multipartículas
+       - Utilizar %s2 para volver al mundo
+    schematic_move_exists: '%s0 ya existe'
+    schematic_move_success: '%s0 -> %s1'
+    schematic_move_failed: '%s0 no movido: %s1'
   clipboard:
     clipboard_cleared: Portapapeles despejado
     clipboard_invalid_format: 'Formato del portapapeles desconocido:  %s0'
@@ -228,9 +228,9 @@ worldedit:
     selector_invalid_coordinates: Coordenadas no válidas %s0
     selector_already_set: Posición ya establecida.
     selector_set_default: El selector de región predeterminado es ahora %s0.
-    selector_pos: Posicion &8[&8%s0&8] &7establecida en &8%s1 (%s2)&7.
-    selector_center: Centro establecido en &8%s0 (%s1).
-    selector_radius: Radio configurado para &8%s0 (%s1).
+    selector_pos: Posicion [%s0] establecida en %s1 (%s2).
+    selector_center: Centro establecido en %s0 (%s1).
+    selector_radius: Radio configurado para %s0 (%s1).
     selector_expanded: Región ampliada a &(%s0 (%s1)
   timezone:
     timezone_set: 'Zona horaria establecida para esta sesión: %s0'
@@ -238,23 +238,23 @@ worldedit:
   command:
     command_invalid_syntax: El comando no se usó correctamente (no hay más ayuda disponible).
   help:
-    command_clarifying_bracket: '&7Ajustador de clarificación añadido para &c%s0'
-    help_suggest: '&7Podría no encontrar %s0. Tal vez pruebe con &4%s1 &7?'
+    command_clarifying_bracket: 'Ajustador de clarificación añadido para %s0'
+    help_suggest: 'Podría no encontrar %s0. Tal vez pruebe con %s1 ?'
     help_header_categories: Tipos de comando
     help_header_subcommands: Subcomandos
-    help_header_command: '&cAyuda para: &7%s0'
-    help_item_allowed: '&a%s0&8 - &7%s1'
-    help_item_denied: '&c%s0&8 - &7%s1'
+    help_header_command: 'Ayuda para: %s0'
+    help_item_allowed: '%s0 - %s1'
+    help_item_denied: '%s0 - %s1'
     help_header: 'Ayuda: Pagina %s0/%s1'
-    help_footer: '&7Wiki: https://git.io/vSKE5'
+    help_footer: 'Wiki: https://git.io/vSKE5'
 progress:
   progress_message: '%s1/%s0 (%s2%) @%s3cps %s4s izquierda'
   progress_finished: '[ Hecho! ]'
 cancel:
-  worldedit_cancel_count: '&4Cancelado %s0 ediciones.'
-  worldedit_cancel_reason_confirm: '&7Vuestra selección es grande (%s0 -> %s1). Usar
-    &c//confirm &7para ejecutar &c%s2'
-  worldedit_cancel_reason: '&4La acción de WorldEdit se canceló:&7 %s0&c.'
+  worldedit_cancel_count: 'Cancelado %s0 ediciones.'
+  worldedit_cancel_reason_confirm: 'Vuestra selección es grande (%s0 -> %s1). Usar
+    //confirm para ejecutar %s2'
+  worldedit_cancel_reason: 'La acción de WorldEdit se canceló: %s0.'
   worldedit_cancel_reason_manual: Cancelación manual
   worldedit_cancel_reason_low_memory: Memoria baja
   worldedit_cancel_reason_max_changes: Demasiados bloques cambiados
@@ -264,7 +264,7 @@ cancel:
   worldedit_cancel_reason_max_iterations: Maximas iteraciones
   worldedit_cancel_reason_no_region: No hay región permitida (bypass con /wea, o deshabilitar
     `region-restrictions` en el archivo config.yml)
-  worldedit_failed_load_chunk: '&4Cambio de chunk ignorado: &7%s0;%s1&c. Trate de
+  worldedit_failed_load_chunk: 'Cambio de chunk ignorado: %s0;%s1. Trate de
     aumentar chunk-wait.'
   worldedit_cancel_reason_outside_level: Mundo exterior
   worldedit_cancel_reason_outside_region: Fuera de la región permitida (Ulilize /wea,
@@ -299,43 +299,43 @@ selection:
     una cavidad de aire, utilice //pos1.'
   sel_convex_polyhedral: 'Selector poliédrico convexo: clic izquierdo=primer vértice,
     derecha haga clic para agregar más.'
-  sel_list: Para obtener una lista de tipos de selección, utilice:&4 //sel list
+  sel_list: 'Para obtener una lista de tipos de selección, utilice: //sel list'
   sel_modes: 'Seleccione uno de los siguientes modos:'
 tips:
-  tip_sel_list: 'Sugerencia: Consulte los diferentes modos de selección con &4//sel
+  tip_sel_list: 'Sugerencia: Consulte los diferentes modos de selección con //sel
     list'
-  tip_select_connected: 'Consejo: Seleccione todos los bloques conectados con &4//sel
+  tip_select_connected: 'Consejo: Seleccione todos los bloques conectados con //sel
     fuzzy'
-  tip_set_pos1: 'Sugerencia: utilice pos1 como patrón con &4//set pos1'
-  tip_farwand: 'Sugerencia: Seleccione puntos distantes con &4//farwand'
-  tip_lazycut: '&7Sugerencia: Es más seguro usar &4//lazycut'
-  tip_fast: '&7Sugerencia: Ajuste rápido y sin deshacer usando &4//fast'
-  tip_cancel: '&7Sugerencia: Usted puede &4//cancel &7un editar en curso'
-  tip_mask: '&7Sugerencia: Establecer una máscara de destino global con &4/gmask'
+  tip_set_pos1: 'Sugerencia: utilice pos1 como patrón con //set pos1'
+  tip_farwand: 'Sugerencia: Seleccione puntos distantes con //farwand'
+  tip_lazycut: 'Sugerencia: Es más seguro usar //lazycut'
+  tip_fast: 'Sugerencia: Ajuste rápido y sin deshacer usando //fast'
+  tip_cancel: 'Sugerencia: Usted puede //cancel un editar en curso'
+  tip_mask: 'Sugerencia: Establecer una máscara de destino global con /gmask'
   tip_mask_angle: 'Sugerencia: Reemplace las pendientes ascendentes de 3-20 bloques
-    utilizando&4 //replace /[-20][-3] bedrock'
-  tip_set_linear: '&7Sugerencia: Establecer bloques linealmente con&4 //set [ID/wood,ID/bedrock]'
-  tip_surface_spread: '&7Sugerencia: Separe una superficie plana con&4 //set #surfacespread[5][0][5][#existing]'
-  tip_set_hand: '&7Sugerencia: Utiliza tu mano actual con &4//set hand'
-  tip_replace_id: '&7Sugerencia: Reemplazar sólo la ID del bloque:&4 //replace woodenstair
+    utilizando //replace /[-20][-3] bedrock'
+  tip_set_linear: 'Sugerencia: Establecer bloques linealmente con //set [ID/wood,ID/bedrock]'
+  tip_surface_spread: 'Sugerencia: Separe una superficie plana con //set #surfacespread[5][0][5][#existing]'
+  tip_set_hand: 'Sugerencia: Utiliza tu mano actual con //set hand'
+  tip_replace_id: 'Sugerencia: Reemplazar sólo la ID del bloque: //replace woodenstair
     #id[cobblestair]'
-  tip_replace_light: 'Sugerencia: Retire las fuentes de luz&4 //replace #brightness[1][15]
+  tip_replace_light: 'Sugerencia: Retire las fuentes de luz //replace #brightness[1][15]
     0'
   tip_tab_complete: 'Sugerencia: El comando replace admite la finalización de la pestaña'
-  tip_flip: 'Sugerencia: Espejo con &4//flip'
-  tip_deform: 'Sugerencia: Reformar con &4//deform'
-  tip_transform: 'Sugerencia: Establecer una transformación con &4//gtransform'
-  tip_copypaste: 'Sugerencia: Pegar en clic con &c//br copypaste'
-  tip_source_mask: 'Sugerencia: Establezca una máscara de origen con &4/gsmask <mask>&7'
+  tip_flip: 'Sugerencia: Espejo con //flip'
+  tip_deform: 'Sugerencia: Reformar con //deform'
+  tip_transform: 'Sugerencia: Establecer una transformación con //gtransform'
+  tip_copypaste: 'Sugerencia: Pegar en clic con //br copypaste'
+  tip_source_mask: 'Sugerencia: Establezca una máscara de origen con /gsmask <mask>'
   tip_replace_marker: 'Sugerencia: Reemplace un bloque con su portapapeles completo
-    usando &4//replace wool #fullcopy'
-  tip_paste: 'Sugerencia: Colocar con &4//paste'
+    usando //replace wool #fullcopy'
+  tip_paste: 'Sugerencia: Colocar con //paste'
   tip_lazycopy: 'Sugerencia: lazycopy es más rápido'
-  tip_download: 'Sugerencia: Pruebe y &4//download'
-  tip_rotate: 'Sugerencia: Orientar con &4//rotate'
-  tip_copy_pattern: 'Sugerencia: Para usar como un patrón try &4#copiar'
+  tip_download: 'Sugerencia: Pruebe y //download'
+  tip_rotate: 'Sugerencia: Orientar con //rotate'
+  tip_copy_pattern: 'Sugerencia: Para usar como un patrón try #copiar'
   tip_regen_0: 'Sugerencia: Utilice un bioma con /regen [biome]'
   tip_regen_1: 'Sugerencia: Utilice una semilla con /regen [biome] [seed]'
-  tip_biome_pattern: 'Sugerencia: El &c#biome[forest]&7 pattern se puede usar en cualquier
+  tip_biome_pattern: 'Sugerencia: El #biome[forest] pattern se puede usar en cualquier
     comando'
   tip_biome_mask: 'Sugerencia: Restrinja a un bioma con la máscara `$jungle`'

worldedit-core/src/main/resources/fr/message.yml

@@ -1,71 +1,71 @@
 # Updated by NShoot
 info:
-  prefix: '&8(&4&lFAWE&8)&r&7'
+  prefix: '(FAWE)'
   file_deleted: '%s0 a été supprimé.'
-  schematic_pasting: '&7La schematic est en train d''être collée. Cette action ne
+  schematic_pasting: 'La schematic est en train d''être collée. Cette action ne
     peut pas être annulée.'
-  lighting_propogate_selection: '&7L''éclairage a été propagé dans %s0 chunks. (Info
+  lighting_propogate_selection: 'L''éclairage a été propagé dans %s0 chunks. (Info
     : Pour supprimer l''éclairage, faites //removelight)'
-  updated_lighting_selection: '&7L''éclairage a été mis à jour dans %s0 chunks. (Cela
+  updated_lighting_selection: 'L''éclairage a été mis à jour dans %s0 chunks. (Cela
     devraît prendre quelques secondes pour que ce soit à jour)'
-  set_region: '&7La sélection a été mise pour votre région actuellement autorisée'
-  worldedit_command_limit: '&7Veuillez patienter le temps que vos actions en cours
+  set_region: 'La sélection a été mise pour votre région actuellement autorisée'
+  worldedit_command_limit: 'Veuillez patienter le temps que vos actions en cours
     soient terminées'
-  worldedit_delayed: '&7Veuillez patienter pendant que votre action soit terminée.'
-  worldedit_run: '&7Désolé du délai. Exécution en cours: %s'
-  worldedit_complete: '&7Modification terminée.'
-  require_selection_in_mask: '&7%s de vos sélections ne sont pas dans votre masque.
+  worldedit_delayed: 'Veuillez patienter pendant que votre action soit terminée.'
+  worldedit_run: 'Désolé du délai. Exécution en cours: %s'
+  worldedit_complete: 'Modification terminée.'
+  require_selection_in_mask: '%s de vos sélections ne sont pas dans votre masque.
     Vous ne pouvez effectuer des modifications que dans vos régions autorisées.'
-  worldedit_volume: '&7Vous ne pouvez pas sélectionner un volume de %current% blocs.
+  worldedit_volume: 'Vous ne pouvez pas sélectionner un volume de %current% blocs.
     Le volume maximal que vous pouvez éditer est de %max% blocs.'
-  worldedit_iterations: '&7Vous ne pouvez pas faire %current% itérations. Votre nombre
+  worldedit_iterations: 'Vous ne pouvez pas faire %current% itérations. Votre nombre
     maximal d''itérations est de %max%.'
-  worldedit_unsafe: '&7L''accès à cette commande est restreint.'
-  worldedit_dangerous_worldedit: '&cModification non sécurisée complétée à %s0 par
+  worldedit_unsafe: 'L''accès à cette commande est restreint.'
+  worldedit_dangerous_worldedit: 'Modification non sécurisée complétée à %s0 par
     %s1'
-  worldedit_toggle_tips_on: '&7Conseils désactivés.'
-  worldedit_toggle_tips_off: '&7Conseils activés.'
-  worldedit_bypassed: '&7Bypass de la restriction du plugin.'
-  worldedit_unmasked: '&6Vos éditions ne sont désormais plus restreintes.'
-  worldedit_restricted: '&6Vos éditions sont désormais restreintes.'
+  worldedit_toggle_tips_on: 'Conseils désactivés.'
+  worldedit_toggle_tips_off: 'Conseils activés.'
+  worldedit_bypassed: 'Bypass de la restriction du plugin.'
+  worldedit_unmasked: 'Vos éditions ne sont désormais plus restreintes.'
+  worldedit_restricted: 'Vos éditions sont désormais restreintes.'
   worldedit_oom_admin: |-
-    &cOptions possibles:
-    &8 - &7//fast
-    &8 - &7Faites de petites modifications
-    &8 - &7Allouez plus de mémoire
-    &8 - &7Désactivez `max-memory-percent`
+    Options possibles:
+     - //fast
+     - Faites de petites modifications
+     - Allouez plus de mémoire
+     - Désactivez `max-memory-percent`
   compressed: Historique compressé. Sauvegardé ~ %s0b (%s1x plus petit)
   action_complete: Action complétée en %s0 secondes.
 error:
-  worldedit_extend: '&cVotre modification a peut-être été étendue en dehors de votre
+  worldedit_extend: 'Votre modification a peut-être été étendue en dehors de votre
     région autorisée.'
   web_unauthorized: 'Seuls les liens suivants sont autorisés : %s0'
-  command_syntax: '&cUtilisation : &7%s0'
-  no_perm: '&cIl vous manque la permission %s0'
-  setting_disable: '&cOption manquante : %s0'
-  brush_not_found: '&cBrosses disponibles : %s0'
-  brush_incompatible: '&cBrosse non compatible avec cette version'
-  schematic_not_found: '&cSchematic non trouvée : &7%s0'
-  no_region: '&cVous n''avez pas de région actuellement autorisée'
-  no_mask: '&cVous n''avez pas de masque actuel'
-  not_player: '&cVous devez être un joueur pour effectuer cette action !'
-  player_not_found: '&cJoueur non trouvé :&7 %s0'
+  command_syntax: 'Utilisation : %s0'
+  no_perm: 'Il vous manque la permission %s0'
+  setting_disable: 'Option manquante : %s0'
+  brush_not_found: 'Brosses disponibles : %s0'
+  brush_incompatible: 'Brosse non compatible avec cette version'
+  schematic_not_found: 'Schematic non trouvée : %s0'
+  no_region: 'Vous n''avez pas de région actuellement autorisée'
+  no_mask: 'Vous n''avez pas de masque actuel'
+  not_player: 'Vous devez être un joueur pour effectuer cette action !'
+  player_not_found: 'Joueur non trouvé : %s0'
   oom: |-
-    &8[&cAttention&8] &cMémoire faible détectée (< 1%). Nous allons :
-    &8 - &7Terminer le placement des blocs
-    &8 - &7Supprimer les historiques de blocs
-    &8 - &7Décharger les chunks non essentiels
-    &8 - &7Tuer les entités
-    &8 - &7Vider la mémoire
-    &cIgnorez ceci si vous essayez de faire crash le serveur.
-    &7Info : La mémoire faible est causé par WE (mais pas nécessairement)
-  worldedit_some_fails: '&c%s0 blocs ne peuvent pas être posés car ils sont en dehors
+    [Attention] Mémoire faible détectée (< 1%). Nous allons :
+     - Terminer le placement des blocs
+     - Supprimer les historiques de blocs
+     - Décharger les chunks non essentiels
+     - Tuer les entités
+     - Vider la mémoire
+    Ignorez ceci si vous essayez de faire crash le serveur.
+    Info : La mémoire faible est causé par WE (mais pas nécessairement)
+  worldedit_some_fails: '%s0 blocs ne peuvent pas être posés car ils sont en dehors
     de votre région autorisée.'
-  worldedit_some_fails_blockbag: '&cBlocs manquants : %s0'
+  worldedit_some_fails_blockbag: 'Blocs manquants : %s0'
   block_not_allowed: Vous n’avez pas la permission d’utiliser
 web:
   generating_link: Téléversement de %s, veuillez patienter...
-  generating_link_failed: '&cImpossible de générer le lien.'
+  generating_link_failed: 'Impossible de générer le lien.'
   download_link: '%s'
 worldedit:
   general:
@@ -129,7 +129,7 @@ worldedit:
     selection_shift: Région déplacée
     selection_cleared: Sélection effacée
   navigation:
-    navigation_wand_error: '&cIl n''y a rien à traverser.'
+    navigation_wand_error: 'Il n''y a rien à traverser.'
   anvil:
     world_is_loaded: Le monde ne devrait pas être utilisé lors de l'exécution. Décharger
       le monde, ou utilisez -f pour passer outre (sauvegarder d'abord)
@@ -144,8 +144,8 @@ worldedit:
     brush_target_offset_set: Définir le décalage de la cible à%s0
     brush_equipped: Brosse équipée de %s0
     brush_try_other: |-
-      &cIl existe d'autres brosses plus appropriées, par ex.
-      &8 - &7//br height [radius=5] [#clipboard|file=null] [rotation=0] [yscale=1.00]
+      Il existe d'autres brosses plus appropriées, par ex.
+       - //br height [radius=5] [#clipboard|file=null] [rotation=0] [yscale=1.00]
     brush_copy: Clic gauche sur la base d'un objet à copier, clic droit pour coller.
       Augmentez le rayon de la brosse si nécessaire.
     brush_height_invalid: Hauteur de la carte invalide (%s0)
@@ -174,8 +174,8 @@ worldedit:
     rollback_element: Rollback de %s0
   tool:
     tool_inspect: Outil d'inspection lié à %s0.
-    tool_inspect_info: '&7%s0 a changé %s1 à %s2 il y a %s3'
-    tool_inspect_info_footer: '&6Total : &7%s0 modifications'
+    tool_inspect_info: '%s0 a changé %s1 à %s2 il y a %s3'
+    tool_inspect_info_footer: 'Total : %s0 modifications'
     tool_none: L'outil plus reliée à l'élément courant.
     tool_info: Outil d'information lié à  %s0.
     tool_tree: Outil d'arbres lié à %s0.
@@ -218,23 +218,23 @@ worldedit:
     nothing_confirmed: Vous n'avez aucune action en attente de confirmation.
     page_footer: Utilisez %s0 pour aller à la page suivante.
   schematic:
-    schematic_prompt_clear: '&7Vous voudriez peut-être utiliser &c%s0 &7pour effacer
+    schematic_prompt_clear: 'Vous voudriez peut-être utiliser %s0 pour effacer
       votre actuel presse-papier'
     schematic_show: |-
-      &7Affichage de &a%s0&7 schématiques depuis &a%s1&7:
-      &8 - &aClic gauche &7> une structure à mettre dans le presse-papier
-      &8 - &aClic droit &7> pour mettre une structure dans le presse-papier multiple
-      &8 - &7Utilisez &a%s2&7 pour revenir au monde
+      Affichage de %s0 schématiques depuis %s1:
+       - Clic gauche > une structure à mettre dans le presse-papier
+       - Clic droit > pour mettre une structure dans le presse-papier multiple
+       - Utilisez %s2 pour revenir au monde
     schematic_format: 'Formats disponibles (nom: Noms de recherche)'
-    schematic_move_exists: '&c%s0 existe déjà'
-    schematic_move_success: '&a%s0 -> %s1'
-    schematic_move_failed: '&a%s0 non déplacé : %s1'
+    schematic_move_exists: '%s0 existe déjà'
+    schematic_move_success: '%s0 -> %s1'
+    schematic_move_failed: '%s0 non déplacé : %s1'
     schematic_loaded: '%s0 chargé. Collez-le avec //paste'
     schematic_saved: '%s0 sauvegardé.'
     schematic_page: La page doit-être %s
     schematic_none: Aucun fichier trouvé.
     schematic_list: 'Fichiers disponibles (nom du fichier: Format) [%s0/%s1]:'
-    schematic_list_elem: '&8 - &a%s0 &8- &7%s1'
+    schematic_list_elem: ' - %s0 - %s1'
   clipboard:
     clipboard_uri_not_found: Vous n'avez pas %s0 chargé.
     clipboard_cleared: Presse-papier effacé
@@ -260,31 +260,31 @@ worldedit:
     command_invalid_syntax: La commande n'a pas été utilisée correctement. (aucune
       aide disponible).
   help:
-    command_clarifying_bracket: '&7Ajout d''un crochet de clarification pour &c%s0'
-    help_suggest: '&7Impossible de trouver %s0. Essayez une des &c%s1 &7?'
+    command_clarifying_bracket: 'Ajout d''un crochet de clarification pour %s0'
+    help_suggest: 'Impossible de trouver %s0. Essayez une des %s1 ?'
     help_header_categories: Types de commandes
     help_header_subcommands: Sous commandes
-    help_header_command: '&cAide pour : &7%s0'
-    help_item_allowed: '&a%s0&8 - &7%s1'
-    help_item_denied: '&c%s0&8 - &7%s1'
+    help_header_command: 'Aide pour : %s0'
+    help_item_allowed: '%s0 - %s1'
+    help_item_denied: '%s0 - %s1'
     help_header: 'Aide : page %s0/%s1'
-    help_footer: '&7Wiki anglais : https://git.io/vSKE5'
+    help_footer: 'Wiki anglais : https://git.io/vSKE5'
   cycler:
     block_cycler_cannot_cycle: Le data de ce bloc ne peut pas être cyclé!
     block_cycler_limit: Limite du nombre maximal de blocs changeable atteinte.
-    block_cycler_no_perm: '&cVous n’êtes pas autorisé à cycler la valeur du data de ce bloc.'
+    block_cycler_no_perm: 'Vous n’êtes pas autorisé à cycler la valeur du data de ce bloc.'
   scripting:
-    scripting_no_perm: '&cVous n’avez pas la permission d’exécuter ce script de fabrication'
+    scripting_no_perm: 'Vous n’avez pas la permission d’exécuter ce script de fabrication'
     scripting_cs: Utilisez /cs avec un nom de script avant.
     scripting_error: Une erreur s’est produite lors de l’exécution d’un script de fabrication.
 progress:
   progress_message: '%s1/%s0 (%s2%) @%s3bps %s4s restants'
   progress_finished: '[ Terminé ! ]'
 cancel:
-  worldedit_cancel_count: '&cModifications %s0 annulées.'
-  worldedit_cancel_reason_confirm: '&7Votre sélection est large (&c%s0 &7-> &c%s1&7,
-    contenant &c%s3&7 blocs). Faites &c//confirm &7pour exécuter &c%s2'
-  worldedit_cancel_reason: '&cVotre action a été annulée :&7 %s0&c.'
+  worldedit_cancel_count: 'Modifications %s0 annulées.'
+  worldedit_cancel_reason_confirm: 'Votre sélection est large (%s0 -> %s1,
+    contenant %s3 blocs). Faites //confirm pour exécuter %s2'
+  worldedit_cancel_reason: 'Votre action a été annulée : %s0.'
   worldedit_cancel_reason_manual: Annulation humaine
   worldedit_cancel_reason_low_memory: Mémoire trop faible
   worldedit_cancel_reason_max_changes: Trop de blocs modifiés
@@ -297,7 +297,7 @@ cancel:
     avec /wea, ou désactivez `region-restrictions` dans la configuration)
   worldedit_cancel_reason_no_region: Région non autorisée (bypass avec /wea, ou désactivez
     `region-restrictions` dans la configuration)
-  worldedit_failed_load_chunk: '&cChargement du chunk ignoré : &7%s0;%s1&c. Essayez
+  worldedit_failed_load_chunk: 'Chargement du chunk ignoré : %s0;%s1. Essayez
     d''augmenter chunk-wait.'
 navigation:
   ascend_fail: Aucune place libre au-dessus de vous n'a été trouvée
@@ -326,53 +326,52 @@ selection:
     clic droit. à ajouter. Pour sélectionner une cavité d''air, utilisez //pos1.'
   sel_convex_polyhedral: 'Sélecteur polyédrique convexe : Clic gauche=Premier sommet,
     droite, droite cliquez pour en ajouter d''autres.'
-  sel_list: Pour une liste de types de sélection, faites &c //sel list
+  sel_list: Pour une liste de types de sélection, faites  //sel list
   sel_modes: 'Sélectionnez un des modes en dessous :'
 tips:
-  tip_sel_list: 'Astuce : Voir les différents modes de sélection avec &c//sel list'
+  tip_sel_list: 'Astuce : Voir les différents modes de sélection avec //sel list'
   tip_select_connected: Astuce, Sélectionner tous les blocs connectés avec //sel fuzzy'
-  tip_set_pos1: Astuce, Utilisez pos1 comme motif avec &c//set pos1
-  tip_farwand: Astuce, Sélectionnez les points distants avec &c//farwand.'
+  tip_set_pos1: Astuce, Utilisez pos1 comme motif avec //set pos1
+  tip_farwand: Astuce, Sélectionnez les points distants avec //farwand.'
   tip_discord: 'Besoin d''aide ? Aide en anglais disponible : https://discord.gg/ngZCzbU'
-  tip_lazycut: '&7Conseil, Il est plus sûr d''utiliser &c//lazycut'
-  tip_fast: '&7Astuce, Définir rapidement et sans défaire en utilisant &c//fas'
-  tip_cancel: '&7Astuce, Vous pouvez &c//cancel &7et éditer en cours de traitement.'
-  tip_mask: '&7Astuce, Définir un masque de destination globale avec &c/gmask'
-  tip_mask_angle: '&7Astuce, Remplacer les pentes ascendantes de 3-20 blocs en faisant&c
+  tip_lazycut: 'Conseil, Il est plus sûr d''utiliser //lazycut'
+  tip_fast: 'Astuce, Définir rapidement et sans défaire en utilisant //fas'
+  tip_cancel: 'Astuce, Vous pouvez //cancel et éditer en cours de traitement.'
+  tip_mask: 'Astuce, Définir un masque de destination globale avec /gmask'
+  tip_mask_angle: 'Astuce, Remplacer les pentes ascendantes de 3-20 blocs en faisant
     //replace /[-20][-3] bedrock'
-  tip_set_linear: '&7Conseil, Définissez les blocs de manière linéaire avec&c //set
+  tip_set_linear: 'Conseil, Définissez les blocs de manière linéaire avec //set
     #l3d[wood,bedrock]'
-  tip_surface_spread: '&7Conseil, Étendez une surface plane à l''aide de&c //set #surfacespread[5][0][5][#existing]'
-  tip_set_hand: '&7Astuce, Utilisez votre main actuelle avec &c//set hand'
-  tip_replace_regex: '&7Tip, Remplacer à l''aide de regex :&c //replace .*_log <pattern>'
-  tip_replace_regex_2: '&7Tip, Remplacer à l''aide de regex :&c //replace .*stairs[facing=(north|south)]
+  tip_surface_spread: 'Conseil, Étendez une surface plane à l''aide de //set #surfacespread[5][0][5][#existing]'
+  tip_set_hand: 'Astuce, Utilisez votre main actuelle avec //set hand'
+  tip_replace_regex: 'Tip, Remplacer à l''aide de regex : //replace .*_log <pattern>'
+  tip_replace_regex_2: 'Tip, Remplacer à l''aide de regex : //replace .*stairs[facing=(north|south)]
     <pattern>'
-  tip_replace_regex_3: '&7Tip, Remplacer à l''aide des opérateurs :&c //replace water[level>2]
+  tip_replace_regex_3: 'Tip, Remplacer à l''aide des opérateurs : //replace water[level>2]
     sand'
-  tip_replace_regex_4: '&7Tip, Remplacer à l''aide des opérateurs :&c //replace true
+  tip_replace_regex_4: 'Tip, Remplacer à l''aide des opérateurs : //replace true
     *[waterlogged=false]'
-  tip_replace_regex_5: '&7Tip, Remplacer à l''aide des opérateurs :&c //replace true
+  tip_replace_regex_5: 'Tip, Remplacer à l''aide des opérateurs : //replace true
     *[level-=1]'
-  tip_replace_id: '&7Tip, Remplacez seulement l''ID du bloc :&c //replace woodenstair
+  tip_replace_id: 'Tip, Remplacez seulement l''ID du bloc : //replace woodenstair
     #id[cobblestair]'
-  tip_replace_light: 'Tip, Remplacez seulement les sources de lumière :&c //replace
+  tip_replace_light: 'Tip, Remplacez seulement les sources de lumière : //replace
     #brightness[1][15] 0'
   tip_tab_complete: Tip, La commande de remplacement prend en charge la complétion
     du tab.
-  tip_flip: Tip, Flip avec &c//flip
-  tip_deform: Tip, Remodeler avec &c//deform
-  tip_transform: Tip, Sélectionnez une transformation avec &c//gtransform
-  tip_copypaste: Tip, Collez en cliquant avec &c//br copypaste
-  tip_source_mask: Tip, Sélectionnez un masque source avec &c/gsmask <mask>&7
+  tip_flip: Tip, Flip avec //flip
+  tip_deform: Tip, Remodeler avec //deform
+  tip_transform: Tip, Sélectionnez une transformation avec //gtransform
+  tip_copypaste: Tip, Collez en cliquant avec //br copypaste
+  tip_source_mask: Tip, Sélectionnez un masque source avec /gsmask <mask>
   tip_replace_marker: 'Tip, Remplacez un bloc avec votre presse-papier entier avec
-    &c//replace wool #fullcopy'
-  tip_paste: Tip, Collez avec &c//paste
+    //replace wool #fullcopy'
+  tip_paste: Tip, Collez avec //paste
   tip_lazycopy: Tip, LazyCopy est plus rapide
-  tip_download: Tip, Essayez &c//download
-  tip_rotate: Tip, Orientez vos sélections avec &c//rotate
-  tip_copy_pattern: Tip, Utilisez un type de pattern avec &c#copy
+  tip_download: Tip, Essayez //download
+  tip_rotate: Tip, Orientez vos sélections avec //rotate
+  tip_copy_pattern: 'Tip, Utilisez un type de pattern avec #copy'
   tip_regen_0: Tip, Utilisez un biome avec /regen [biome]
   tip_regen_1: Tip, Utilisez un seed avec /regen [biome] [seed]
-  tip_biome_pattern: Tip, Le pattern &c#biome[forest]&7 peut être utilisé dans une
-    quelconque commande
+  tip_biome_pattern: Tip, Le pattern '#biome[forest] peut être utilisé dans une quelconque commande'
   tip_biome_mask: Tip, Mettez une restriction de biome en utilisant le masque `$jungle`

worldedit-core/src/main/resources/it/message.yml

@@ -1,60 +1,60 @@
 info:
-  prefix: '&8(&4&lFAWE&8)&r&7'
+  prefix: '(FAWE)'
   file_deleted: '%s0 è stato eliminato.'
-  schematic_pasting: '&7La schematica si sta incollando. Questo non può essere annullato.'
-  lighting_propogate_selection: '&7L''illuminazione è stata propagata in %s0 chunk. (Nota: Per rimuovere la luce usa //removelight)'
-  updated_lighting_selection: '&7L''illuminazione è stata aggiornata in %s0 chunk. (Può richiedere un secondo per i pacchetti da inviare)'
-  set_region: '&7Selezione impostata alla tua regione attuale consentita'
-  worldedit_command_limit: '&7Attendi fino al completamento della tua azione corrente'
-  worldedit_delayed: '&7Attendi durante l''elaborazione della tua azione di FAWE...'
-  worldedit_run: '&7Scuse per il ritardo. Ora in esecuzione: %s'
-  worldedit_complete: '&7Modifica completata.'
-  require_selection_in_mask: '&7%s della tua selezione non è nella tua maschera. Puoi solo fare modifiche all''interno delle regioni consentite.'
-  worldedit_volume: '&7Non puoi selezionare un volume di %current%. Il volume massimo che puoi modificare è %max%.'
-  worldedit_iterations: '&7Non puoi iterare %current% volte. Il numero massimo di interazioni consentite è %max%.'
-  worldedit_unsafe: '&7L''accesso a quel comando è stato bloccato'
-  worldedit_dangerous_worldedit: '&cModifica non sicura elaborata a %s0 da %s1'
-  worldedit_bypass: '&7&oPer bypassare le tue restrizioni usa &c/wea'
-  worldedit_toggle_tips_on: '&7Suggerimenti di FAWE disabilitati.'
-  worldedit_toggle_tips_off: '&7Suggerimenti di FAWE abilitati.'
-  worldedit_bypassed: '&7Attualmente bypassando la restrizione di FAWE.'
-  worldedit_unmasked: '&6Le tue modifiche di FAWE non sono più soggette a restrizioni.'
-  worldedit_restricted: '&6Le tue modifiche di FAWE sono ora soggette a restrizioni.'
+  schematic_pasting: 'La schematica si sta incollando. Questo non può essere annullato.'
+  lighting_propogate_selection: 'L''illuminazione è stata propagata in %s0 chunk. (Nota: Per rimuovere la luce usa //removelight)'
+  updated_lighting_selection: 'L''illuminazione è stata aggiornata in %s0 chunk. (Può richiedere un secondo per i pacchetti da inviare)'
+  set_region: 'Selezione impostata alla tua regione attuale consentita'
+  worldedit_command_limit: 'Attendi fino al completamento della tua azione corrente'
+  worldedit_delayed: 'Attendi durante l''elaborazione della tua azione di FAWE...'
+  worldedit_run: 'Scuse per il ritardo. Ora in esecuzione: %s'
+  worldedit_complete: 'Modifica completata.'
+  require_selection_in_mask: '%s della tua selezione non è nella tua maschera. Puoi solo fare modifiche all''interno delle regioni consentite.'
+  worldedit_volume: 'Non puoi selezionare un volume di %current%. Il volume massimo che puoi modificare è %max%.'
+  worldedit_iterations: 'Non puoi iterare %current% volte. Il numero massimo di interazioni consentite è %max%.'
+  worldedit_unsafe: 'L''accesso a quel comando è stato bloccato'
+  worldedit_dangerous_worldedit: 'Modifica non sicura elaborata a %s0 da %s1'
+  worldedit_bypass: 'Per bypassare le tue restrizioni usa /wea'
+  worldedit_toggle_tips_on: 'Suggerimenti di FAWE disabilitati.'
+  worldedit_toggle_tips_off: 'Suggerimenti di FAWE abilitati.'
+  worldedit_bypassed: 'Attualmente bypassando la restrizione di FAWE.'
+  worldedit_unmasked: 'Le tue modifiche di FAWE non sono più soggette a restrizioni.'
+  worldedit_restricted: 'Le tue modifiche di FAWE sono ora soggette a restrizioni.'
   worldedit_oom_admin: |-
-    &cOpzioni possibili:
-    &8 - &7//fast
-    &8 - &7Fai modifiche più piccole
-    &8 - &7Alloca più memoria
-    &8 - &7Disabilita `max-memory-percent`
+    Opzioni possibili:
+     - //fast
+     - Fai modifiche più piccole
+     - Alloca più memoria
+     - Disabilita `max-memory-percent`
   compressed: Cronologia compressa. Risparmiati ~ %s0b (%s1x più piccola)
   action_complete: Azione completata in %s0 secondi
 error:
-  worldedit_extend: '&cLa tua modifica potrebbe essere stata estesa al di fuori della tua area consentita.'
+  worldedit_extend: 'La tua modifica potrebbe essere stata estesa al di fuori della tua area consentita.'
   web_unauthorized: 'Sono consentiti solo i link dall''host web configurato: %s0'
-  command_syntax: '&cUso: &7%s0'
-  no_perm: '&cTi manca il permesso: %s0'
-  setting_disable: '&cImpostazione mancante: %s0'
-  brush_not_found: '&cPennelli disponibili: %s0'
-  brush_incompatible: '&cPennello non compatibile con questa versione'
-  schematic_not_found: '&cSchematica non trovata: &7%s0'
-  no_region: '&cAttualmente non hai una regione consentita'
-  no_mask: '&cAttualmente non hai una maschera impostata'
-  not_player: '&cDevi essere un giocatore per eseguire questa azione!'
-  player_not_found: '&cGiocatore non trovato:&7 %s0'
+  command_syntax: 'Uso: %s0'
+  no_perm: 'Ti manca il permesso: %s0'
+  setting_disable: 'Impostazione mancante: %s0'
+  brush_not_found: 'Pennelli disponibili: %s0'
+  brush_incompatible: 'Pennello non compatibile con questa versione'
+  schematic_not_found: 'Schematica non trovata: %s0'
+  no_region: 'Attualmente non hai una regione consentita'
+  no_mask: 'Attualmente non hai una maschera impostata'
+  not_player: 'Devi essere un giocatore per eseguire questa azione!'
+  player_not_found: 'Giocatore non trovato: %s0'
   oom: |-
-    &8[&cCritico&8] &cRilevata poca memoria cioè < 1%. Prenderemo le seguenti azioni:
-    &8 - &7Terminare il posizionamento di WE dei blocchi
-    &8 - &7Cancellare la cronologia di WE
-    &8 - &7Scaricare i chunk non essenziali
-    &8 - &7Uccidere le entità
-    &8 - &7Eseguire un garbage collector
-    &cIgnora questo se stai cercando di far crashare il server.
-    &7Nota: La carenza di memoria è probabilmente (ma non necessariamente) causata da WE
-  worldedit_some_fails: '&c%s0 blocchi non sono stati piazzati perché erano fuori dalla tua regione consentita.'
-  worldedit_some_fails_blockbag: '&cBlocchi mancanti: %s0'
+    [Critico] Rilevata poca memoria cioè < 1%. Prenderemo le seguenti azioni:
+     - Terminare il posizionamento di WE dei blocchi
+     - Cancellare la cronologia di WE
+     - Scaricare i chunk non essenziali
+     - Uccidere le entità
+     - Eseguire un garbage collector
+    Ignora questo se stai cercando di far crashare il server.
+    Nota: La carenza di memoria è probabilmente (ma non necessariamente) causata da WE
+  worldedit_some_fails: '%s0 blocchi non sono stati piazzati perché erano fuori dalla tua regione consentita.'
+  worldedit_some_fails_blockbag: 'Blocchi mancanti: %s0'
 web:
   generating_link: Caricando %s, si prega di attendere...
-  generating_link_failed: '&cFallita la generazione del link di download!'
+  generating_link_failed: 'Fallita la generazione del link di download!'
   download_link: '%s'
 worldedit:
   general:
@@ -113,7 +113,7 @@ worldedit:
     selection_shift: Regione spostata
     selection_cleared: Selezione cancellata
   navigation:
-    navigation_wand_error: '&cNiente da attraversare'
+    navigation_wand_error: 'Niente da attraversare'
   anvil:
     world_is_loaded: Il mondo non dovrebbe essere in uso durante l''esecuzione. Scarica il mondo, o usa -f per sovrascriverlo (salvalo prima)
   brush:
@@ -127,8 +127,8 @@ worldedit:
     brush_target_offset_set: Impostato l'offset di destinazione a %s0
     brush_equipped: Equipaggiato il pennello %s0
     brush_try_other: |-
-      &cCi sono altri pennelli più adatti es.
-      &8 - &7//br height [radius=5] [#clipboard|file=null] [rotation=0] [yscale=1.00]
+      Ci sono altri pennelli più adatti es.
+       - //br height [radius=5] [#clipboard|file=null] [rotation=0] [yscale=1.00]
     brush_copy: Click sinistro sulla base di un oggetto da copiare, click destro per incollare. Aumenta il raggio del pennello se necessario.
     brush_height_invalid: File della height map non valido (%s0)
     brush_smooth: 'Nota: Usa il pennello sfumato per levigare sporgenze o grotte.'
@@ -151,8 +151,8 @@ worldedit:
     rollback_element: Annullando %s0
   tool:
     tool_inspect: Strumento di ispezione associato a %s0.
-    tool_inspect_info: '&7%s0 ha modificato %s1 a %s2 %s3 fa'
-    tool_inspect_info_footer: '&6Totale: &7%s0 modifiche'
+    tool_inspect_info: '%s0 ha modificato %s1 a %s2 %s3 fa'
+    tool_inspect_info_footer: 'Totale: %s0 modifiche'
     tool_none: Strumento disassociato dal tuo oggetto corrente.
     tool_info: Strumento di informazioni associato a %s0.
     tool_tree: Strumento di generazione di alberi associato a %s0.
@@ -189,7 +189,7 @@ worldedit:
     schematic_page: La pagina deve essere %s
     schematic_none: Nessun file trovato.
     schematic_list: 'File disponibili (Nome file: Formato) [%s0/%s1]:'
-    schematic_list_elem: '&8 - &a%s0 &8- &7%s1'
+    schematic_list_elem: ' - %s0 - %s1'
   clipboard:
     clipboard_uri_not_found: Non hai %s0 caricato
     clipboard_cleared: Appunti cancellati
@@ -214,22 +214,22 @@ worldedit:
   command:
     command_invalid_syntax: Il comando non è stato usato correttamente (nessun altro aiuto disponibile).
   help:
-    command_clarifying_bracket: '&7Aggiunta una parentesi di chiarimento per &c%s0'
-    help_suggest: '&7Non è stato possibile trovare %s0. Forse provane uno di &c%s1 &7?'
+    command_clarifying_bracket: 'Aggiunta una parentesi di chiarimento per %s0'
+    help_suggest: 'Non è stato possibile trovare %s0. Forse provane uno di %s1 ?'
     help_header_categories: Tipi di Comando
     help_header_subcommands: Sottocomandi
-    help_header_command: '&cAiuto per: &7%s0'
-    help_item_allowed: '&a%s0&8 - &7%s1'
-    help_item_denied: '&c%s0&8 - &7%s1'
+    help_header_command: 'Aiuto per: %s0'
+    help_item_allowed: '%s0 - %s1'
+    help_item_denied: '%s0 - %s1'
     help_header: 'Aiuto: pagina %s0/%s1'
-    help_footer: '&7Wiki: https://git.io/vSKE5'
+    help_footer: 'Wiki: https://git.io/vSKE5'
 progress:
   progress_message: '%s1/%s0 (%s2%) @%s3cps %s4s rimanenti'
   progress_finished: '[ Fatto! ]'
 cancel:
-  worldedit_cancel_count: '&cCancellate %s0 modifiche.'
-  worldedit_cancel_reason_confirm: '&7La tua selezione è grande (%s0 -> %s1). Usa &c//confirm &7per eseguire &c%s2'
-  worldedit_cancel_reason: '&cLa tua azione WorldEdit è stata cancellata:&7 %s0&c.'
+  worldedit_cancel_count: 'Cancellate %s0 modifiche.'
+  worldedit_cancel_reason_confirm: 'La tua selezione è grande (%s0 -> %s1). Usa //confirm per eseguire %s2'
+  worldedit_cancel_reason: 'La tua azione WorldEdit è stata cancellata: %s0.'
   worldedit_cancel_reason_manual: Cancellazione manuale
   worldedit_cancel_reason_low_memory: Poca memoria
   worldedit_cancel_reason_max_changes: Troppi blocchi cambiati
@@ -239,7 +239,7 @@ cancel:
   worldedit_cancel_reason_max_iterations: Iterazioni massime
   worldedit_cancel_reason_max_fails: Fuori dalla regione consentita (bypassa con /wea, o disabilita `region-restrictions` in config.yml)
   worldedit_cancel_reason_no_region: Nessuna regione consentita (bypassa con /wea, o disabilita `region-restrictions` in config.yml)
-  worldedit_failed_load_chunk: '&cSaltato il caricamento del chunk: &7%s0;%s1&c. Prova aumentando chunk-wait.'
+  worldedit_failed_load_chunk: 'Saltato il caricamento del chunk: %s0;%s1. Prova aumentando chunk-wait.'
 navigation:
   ascend_fail: Nessun posto libero trovato sopra di te.
   ascended_plural: Asceso di %s0 livelli.
@@ -263,36 +263,36 @@ selection:
   sel_max: '%s0 punti al massimo.'
   sel_fuzzy: 'Selettore sfocato: Click sinistro per selezionare tutti i blocchi contingenti, click destro per aggiungere. Per selezionare una cavità d''aria, usa //pos1.'
   sel_convex_polyhedral: 'Selettore poliedrico convesso: Click sinistro=Primo vertice, click destro per aggiungerne altri.'
-  sel_list: Per una lista di tipi di selezione usa:&c //sel list
+  sel_list: 'Per una lista di tipi di selezione usa: //sel list'
   sel_modes: 'Seleziona una delle modalità qui sotto:'
 tips:
-  tip_sel_list: 'Consiglio: Vedi le diverse modalità di selezione con &c//sel list'
+  tip_sel_list: 'Consiglio: Vedi le diverse modalità di selezione con //sel list'
   tip_select_connected: 'Consiglio: Seleziona tutti i blocchi collegati con //sel fuzzy'
-  tip_set_pos1: 'Consiglio: Usa pos1 come un pattern con &c//set pos1'
-  tip_farwand: 'Consiglio: Seleziona i punti distanti con &c//farwand'
-  tip_lazycut: '&7Consiglio: È più sicuro usare &c//lazycut'
-  tip_fast: '&7Consiglio: Imposta velocemente e senza l''annullamento usando &c//fast'
-  tip_cancel: '&7Consiglio: Puoi cancellare con &c//cancel &7una modifica in corso'
-  tip_mask: '&7Consiglio: Imposta una maschera di destinazione globale con &c/gmask'
-  tip_mask_angle: 'Consiglio: Sostituire le pendenze verso l''alto di 3-20 blocchi usando&c //replace /[-20][-3] bedrock'
-  tip_set_linear: '&7Consiglio: Imposta i blocchi linearmente con&c //set #l3d[wood,bedrock]'
-  tip_surface_spread: '&7Consiglio: Propaga una superficie piana con&c //set #surfacespread[5][0][5][#existing]'
-  tip_set_hand: '&7Consiglio: Usa la tua mano attuale con &c//set hand'
-  tip_replace_id: '&7Consiglio: Sostituisci solo l''id del blocco:&c //replace woodenstair #id[cobblestair]'
-  tip_replace_light: 'Consiglio: Rimuovi le sorgenti di luce con&c //replace #brightness[1][15] 0'
+  tip_set_pos1: 'Consiglio: Usa pos1 come un pattern con //set pos1'
+  tip_farwand: 'Consiglio: Seleziona i punti distanti con //farwand'
+  tip_lazycut: 'Consiglio: È più sicuro usare //lazycut'
+  tip_fast: 'Consiglio: Imposta velocemente e senza l''annullamento usando //fast'
+  tip_cancel: 'Consiglio: Puoi cancellare con //cancel una modifica in corso'
+  tip_mask: 'Consiglio: Imposta una maschera di destinazione globale con /gmask'
+  tip_mask_angle: 'Consiglio: Sostituire le pendenze verso l''alto di 3-20 blocchi usando //replace /[-20][-3] bedrock'
+  tip_set_linear: 'Consiglio: Imposta i blocchi linearmente con //set #l3d[wood,bedrock]'
+  tip_surface_spread: 'Consiglio: Propaga una superficie piana con //set #surfacespread[5][0][5][#existing]'
+  tip_set_hand: 'Consiglio: Usa la tua mano attuale con //set hand'
+  tip_replace_id: 'Consiglio: Sostituisci solo l''id del blocco: //replace woodenstair #id[cobblestair]'
+  tip_replace_light: 'Consiglio: Rimuovi le sorgenti di luce con //replace #brightness[1][15] 0'
   tip_tab_complete: 'Consiglio: Il comando replace supporta il completamento del tabulatore'
-  tip_flip: 'Consiglio: Specchia con &c//flip'
-  tip_deform: 'Consiglio: Rimodella con &c//deform'
-  tip_transform: 'Consiglio: Imposta una trasformazione con &c//gtransform'
-  tip_copypaste: 'Consiglio: Incolla al click con &c//br copypaste'
-  tip_source_mask: 'Consiglio: Imposta una maschera sorgente con &c/gsmask <maschera>&7'
-  tip_replace_marker: 'Consiglio: Sostituisci un blocco con i tuoi appunti completi usando &c//replace wool #fullcopy'
-  tip_paste: 'Consiglio: Colloca con &c//paste'
+  tip_flip: 'Consiglio: Specchia con //flip'
+  tip_deform: 'Consiglio: Rimodella con //deform'
+  tip_transform: 'Consiglio: Imposta una trasformazione con //gtransform'
+  tip_copypaste: 'Consiglio: Incolla al click con //br copypaste'
+  tip_source_mask: 'Consiglio: Imposta una maschera sorgente con /gsmask <maschera>'
+  tip_replace_marker: 'Consiglio: Sostituisci un blocco con i tuoi appunti completi usando //replace wool #fullcopy'
+  tip_paste: 'Consiglio: Colloca con //paste'
   tip_lazycopy: 'Consiglio: lazycopy è più veloce'
-  tip_download: 'Consiglio: Prova &c//download'
-  tip_rotate: 'Consiglio: Orienta con &c//rotate'
-  tip_copy_pattern: 'Consiglio: Per usarlo come un pattern prova &c#copy'
+  tip_download: 'Consiglio: Prova //download'
+  tip_rotate: 'Consiglio: Orienta con //rotate'
+  tip_copy_pattern: 'Consiglio: Per usarlo come un pattern prova #copy'
   tip_regen_0: 'Consiglio: Usa un bioma con /regen [biome]'
   tip_regen_1: 'Consiglio: Usa un seme con /regen [biome] [seed]'
-  tip_biome_pattern: 'Consiglio: Il pattern &c#biome[forest]&7 può essere usato in qualsiasi comando'
+  tip_biome_pattern: 'Consiglio: Il pattern #biome[forest] può essere usato in qualsiasi comando'
   tip_biome_mask: 'Consiglio: Limita a un bioma con la maschera `$jungle`'

worldedit-core/src/main/resources/nl/message.yml

@@ -1,68 +1,68 @@
 # Translated and updated by RainbowGodDouwe
 info:
-  prefix: '&8(&4&lFAWE&8)&r&7'
+  prefix: '(FAWE)'
   file_deleted: '%s0 Is verwijderd.'
-  schematic_pasting: '&7Het schematic wordt geplaatst. dit kan niet veranderd worden.'
-  lighting_propogate_selection: '&7Het licht heeft zich verspreid in %s0 chunks. (Note:
+  schematic_pasting: 'Het schematic wordt geplaatst. dit kan niet veranderd worden.'
+  lighting_propogate_selection: 'Het licht heeft zich verspreid in %s0 chunks. (Note:
     om het licht te verwijderen, doe //removelight)'
-  updated_lighting_selection: '&7Lighting is geüpdatet in %s0 chunks. (het kan even
+  updated_lighting_selection: 'Lighting is geüpdatet in %s0 chunks. (het kan even
     duren voordat de packets worden verstuurd)'
-  set_region: '&7Toegestaande regio geselecteerd'
-  worldedit_command_limit: '&7U kunt weer verder gaan wanneer uw vorige actie voltooid
+  set_region: 'Toegestaande regio geselecteerd'
+  worldedit_command_limit: 'U kunt weer verder gaan wanneer uw vorige actie voltooid
     is'
-  worldedit_delayed: '&7U kunt weer verder gaan wanneer wij uw FAWE action voltooien...'
-  worldedit_run: '&7Sorry voor het ongemak.  huidige uitvoerende actie: %s'
-  worldedit_complete: '&7Verandering voldaan.'
-  require_selection_in_mask: '&7%s Van je selectie is niet binnen je mask. Je kan
+  worldedit_delayed: 'U kunt weer verder gaan wanneer wij uw FAWE action voltooien...'
+  worldedit_run: 'Sorry voor het ongemak.  huidige uitvoerende actie: %s'
+  worldedit_complete: 'Verandering voldaan.'
+  require_selection_in_mask: '%s Van je selectie is niet binnen je mask. Je kan
     alleen veranderingen uitvoeren in de toegestaande regio.'
-  worldedit_volume: '&7Je kan niet een volume van %current% toepassen. Het maximum
+  worldedit_volume: 'Je kan niet een volume van %current% toepassen. Het maximum
     volume dat je kan toepassen is %max%.'
-  worldedit_iterations: '&7Je kan %current% niet zoveel keer herhalen. het maximale
+  worldedit_iterations: 'Je kan %current% niet zoveel keer herhalen. het maximale
     wat toegestaan is, is %max%.'
-  worldedit_unsafe: '&7Toegang tot deze command is geblokkeerd'
-  worldedit_dangerous_worldedit: '&cNnveilige edits zijn verwerkt op %s0 by %s1'
-  worldedit_toggle_tips_on: '&7Disabled FAWE tips.'
-  worldedit_toggle_tips_off: '&7De FAWE tips staan nu aan.'
-  worldedit_bypassed: '&7De restrictie of FAWE wordt nu overscheiden.'
-  worldedit_unmasked: '&6Je FAWE edits hebben nu geen restrictie meer.'
-  worldedit_restricted: '&6Je FAWE edits hebben nu een restrictie.'
+  worldedit_unsafe: 'Toegang tot deze command is geblokkeerd'
+  worldedit_dangerous_worldedit: 'Nnveilige edits zijn verwerkt op %s0 by %s1'
+  worldedit_toggle_tips_on: 'Disabled FAWE tips.'
+  worldedit_toggle_tips_off: 'De FAWE tips staan nu aan.'
+  worldedit_bypassed: 'De restrictie of FAWE wordt nu overscheiden.'
+  worldedit_unmasked: 'Je FAWE edits hebben nu geen restrictie meer.'
+  worldedit_restricted: 'Je FAWE edits hebben nu een restrictie.'
   worldedit_oom_admin: |-
-    &cMogelijke opties:
-    &8 - &7//fast
-    &8 - &7Voer kleinere bewerkingen uit
-    &8 - &7Wijs meer geheugen toe
-    &8 - &7Disable `max-memory-percent`
+    Mogelijke opties:
+     - //fast
+     - Voer kleinere bewerkingen uit
+     - Wijs meer geheugen toe
+     - Disable `max-memory-percent`
   compressed: Geschiedenis gecomprimeerd. Saved ~ %s0b (%s1x kleiner)
   action_complete: Uitvoering is over %s0 voltooid.
 error:
-  worldedit_extend: '&cje edit is waarschijnlijk buiten het toegestaande gebied gekomen.'
+  worldedit_extend: 'je edit is waarschijnlijk buiten het toegestaande gebied gekomen.'
   web_unauthorized: 'alleen links van de configureerde webhost zijn toegestaan: %s0'
-  command_syntax: '&cGebruik: &7%s0'
-  no_perm: '&cje hebt hier geen permission node voor: %s0'
-  setting_disable: '&cSetting ontbreekt: %s0'
-  brush_not_found: '&cBruikbare brushes: %s0'
-  brush_incompatible: '&cDeze brush kan niet in deze versie gebruikt worden'
-  schematic_not_found: '&cSchematic niet gevonden: &7%s0'
-  no_region: '&cJe hebt momenteel geen toegestaand gebied'
-  no_mask: '&cJe hebt momenteel geen brush geselecteerd'
-  not_player: '&cJe moet een speler zijn om dit te doen!'
-  player_not_found: '&cSpeler niet gevonden:&7 %s0'
+  command_syntax: 'Gebruik: %s0'
+  no_perm: 'je hebt hier geen permission node voor: %s0'
+  setting_disable: 'Setting ontbreekt: %s0'
+  brush_not_found: 'Bruikbare brushes: %s0'
+  brush_incompatible: 'Deze brush kan niet in deze versie gebruikt worden'
+  schematic_not_found: 'Schematic niet gevonden: %s0'
+  no_region: 'Je hebt momenteel geen toegestaand gebied'
+  no_mask: 'Je hebt momenteel geen brush geselecteerd'
+  not_player: 'Je moet een speler zijn om dit te doen!'
+  player_not_found: 'Speler niet gevonden: %s0'
   oom: |-
-    &8[&cCritical&8] &cGedetecteerd laag geheugen i.e. < 1%. We zullen de volgende acties ondernemen:
-    &8 - &7Verwijder de huidige WE blok plaatsing
-    &8 - &7Clear WE history
-    &8 - &7Unload non essential chunks
-    &8 - &7Dood de entities
-    &8 - &7Onnodige data collecteren
-    &cNegeer dit als je de server wilt laten crashen.
-    &7Note: Een laag opslagvermogen kan door WE veroorzaakt worden (dit hoeft niet)
-  worldedit_some_fails: '&c%s0 Blokken zijn niet geplaats omdat ze uit je toegestaande
+    [Critical] Gedetecteerd laag geheugen i.e. < 1%. We zullen de volgende acties ondernemen:
+     - Verwijder de huidige WE blok plaatsing
+     - Clear WE history
+     - Unload non essential chunks
+     - Dood de entities
+     - Onnodige data collecteren
+    Negeer dit als je de server wilt laten crashen.
+    Note: Een laag opslagvermogen kan door WE veroorzaakt worden (dit hoeft niet)
+  worldedit_some_fails: '%s0 Blokken zijn niet geplaats omdat ze uit je toegestaande
     gebied werden geplaatst.'
-  worldedit_some_fails_blockbag: '&coOntbrekende blokken: %s0'
+  worldedit_some_fails_blockbag: 'oOntbrekende blokken: %s0'
   block_not_allowed: Het is niet toegestaan om dit te gebruiken
 web:
   generating_link: Uploading %s, even geduld A.U.B...
-  generating_link_failed: '&cDe donwload link kon niet worden gemaakt!'
+  generating_link_failed: 'De donwload link kon niet worden gemaakt!'
   download_link: '%s'
 worldedit:
   general:
@@ -125,7 +125,7 @@ worldedit:
     selection_shift: Region verzet
     selection_cleared: Selectie verwijderd
   navigation:
-    navigation_wand_error: '&cNergens om door heen te gaan'
+    navigation_wand_error: 'Nergens om door heen te gaan'
   anvil:
     world_is_loaded: de wereld zou niet in gebruik moeten zijn wanneer er een uitvoering
       wordt gedaan. onlaad de wereld, of gebruik -f om het te overschrijden (save
@@ -141,8 +141,8 @@ worldedit:
     brush_target_offset_set: Uitschietting van de target gezet tot %s0
     brush_equipped: Brush in gebruik %s0
     brush_try_other: |-
-      &cEr zijn betere brushes hier voor te gebruiken e.g.
-      &8 - &7//br height [radius=5] [#clipboard|file=null] [rotation=0] [yscale=1.00]
+      Er zijn betere brushes hier voor te gebruiken e.g.
+       - //br height [radius=5] [#clipboard|file=null] [rotation=0] [yscale=1.00]
     brush_copy: Links klik de fundering van de constructie om te kopieëren, rechts
       klik om te plakken. Verhoog de brush Settings als dat mogelijk is.
     brush_height_invalid: Onvalide hoogte map file (%s0)
@@ -170,8 +170,8 @@ worldedit:
     rollback_element: Aan %s0 het ontdaan maken.
   tool:
     tool_inspect: Inspect tool gebonden aan %s0.
-    tool_inspect_info: '&7%s0 veranderd %s1 to %s2 %s3 geleden'
-    tool_inspect_info_footer: '&6Totaal: &7%s0 veranderingen'
+    tool_inspect_info: '%s0 veranderd %s1 to %s2 %s3 geleden'
+    tool_inspect_info_footer: 'Totaal: %s0 veranderingen'
     tool_none: De tool is niet meer gebonden aan je item.
     tool_info: Info tool gebonden aan %s0.
     tool_tree: Tree tool gebonden aan %s0.
@@ -214,23 +214,23 @@ worldedit:
     nothing_confirmed: Je hebt geen acties die bevestigt moeten worden.
     page_footer: Gebruik %s0 om naar de volgende pagina te gaan
   schematic:
-    schematic_prompt_clear: '&7we raden je aan &c%s0 &7 te gebruiken om je klipbord
+    schematic_prompt_clear: 'we raden je aan %s0  te gebruiken om je klipbord
       te verwijderen first'
     schematic_show: |-
-      &7scematics &a%s0&7 aan het wergeven &a%s1&7:
-      &8 - &aLinks klik &7a het gebouw om er een klipbord van de maken
-      &8 - &aRechts klik &7a om een gebouw toe te voegen aan je multi-klipbord
-      &8 - &7Gebruik &a%s2&7 om terug naar de wereld te gaan
+      scematics %s0 aan het wergeven %s1:
+       - Links klik a het gebouw om er een klipbord van de maken
+       - Rechts klik a om een gebouw toe te voegen aan je multi-klipbord
+       - Gebruik %s2 om terug naar de wereld te gaan
     schematic_format: 'Beschikbare formats (Name: Lookup names)'
-    schematic_move_exists: '&c%s0 bestaat al'
-    schematic_move_success: '&a%s0 -> %s1'
-    schematic_move_failed: '&a%s0 aantal verplaatst: %s1'
+    schematic_move_exists: '%s0 bestaat al'
+    schematic_move_success: '%s0 -> %s1'
+    schematic_move_failed: '%s0 aantal verplaatst: %s1'
     schematic_loaded: '%s0 gelanden. plak met //paste'
     schematic_saved: '%s0 opgeslagen.'
     schematic_page: Pagina moet %s zijn
     schematic_none: Niks gevonden.
     schematic_list: 'Beschikbare files (Filename: Format) [%s0/%s1]:'
-    schematic_list_elem: '&8 - &a%s0 &8- &7%s1'
+    schematic_list_elem: ' - %s0 - %s1'
   clipboard:
     clipboard_uri_not_found: Je hebt %s0 niet geladen
     clipboard_cleared: Jlikbord verwijderd
@@ -255,31 +255,31 @@ worldedit:
   command:
     command_invalid_syntax: De command was niet goed gebruikt (no more help available).
   help:
-    command_clarifying_bracket: '&7 clarifying bracket toegevoegt aan &c%s0'
-    help_suggest: '&7kon %s0 niet binden. misschien één van deze proberen &c%s1 &7?'
+    command_clarifying_bracket: ' clarifying bracket toegevoegt aan %s0'
+    help_suggest: 'kon %s0 niet binden. misschien één van deze proberen %s1 ?'
     help_header_categories: Command Types
     help_header_subcommands: Subcommands
-    help_header_command: '&cHelp voor: &7%s0'
-    help_item_allowed: '&a%s0&8 - &7%s1'
-    help_item_denied: '&c%s0&8 - &7%s1'
+    help_header_command: 'Help voor: %s0'
+    help_item_allowed: '%s0 - %s1'
+    help_item_denied: '%s0 - %s1'
     help_header: 'Help: pagina %s0/%s1'
-    help_footer: '&7Wiki: https://git.io/vSKE5'
+    help_footer: 'Wiki: https://git.io/vSKE5'
   cycler:
     block_cycler_cannot_cycle:  De blok data kan niet worden veranderd.
     block_cycler_limit: Maximale veranderingen in blokken bereikt.
-    block_cycler_no_perm: '&cHet is niet toegestaan om deze blok data te veranderen.'
+    block_cycler_no_perm: 'Het is niet toegestaan om deze blok data te veranderen.'
   scripting:
-    scripting_no_perm: '&cJe hebt onvoldoende rechten om deze craft scriptie uit te voeren. '
+    scripting_no_perm: 'Je hebt onvoldoende rechten om deze craft scriptie uit te voeren. '
     scripting_cs: Gebruik eerst /cs met een scriptie naam.
     scripting_error: Er waren problemen onstaan bij het uitvoeren van de craft scriptie.
 progress:
   progress_message: '%s1/%s0 (%s2%) @%s3cps %s4s left'
   progress_finished: '[ Klaar! ]'
 cancel:
-  worldedit_cancel_count: '&czoveel edits: %s0 ontdaan.'
-  worldedit_cancel_reason_confirm: '&7Het geselecteerde gebied is groot (&c%s0 &7->
-    &c%s1&7, containing &c%s3&7 blocks). Gebruik &c//confirm &7om te bevestigen &c%s2'
-  worldedit_cancel_reason: '&cYour WorldEdit actie was opgeheven:&7 %s0&c.'
+  worldedit_cancel_count: 'zoveel edits: %s0 ontdaan.'
+  worldedit_cancel_reason_confirm: 'Het geselecteerde gebied is groot (%s0 ->
+    %s1, containing %s3 blocks). Gebruik //confirm om te bevestigen %s2'
+  worldedit_cancel_reason: 'Your WorldEdit actie was opgeheven: %s0.'
   worldedit_cancel_reason_manual: manuele opheffing
   worldedit_cancel_reason_low_memory: Lage memory
   worldedit_cancel_reason_max_changes: Teveel blokken verandered
@@ -292,7 +292,7 @@ cancel:
     /wea, or disable `region-restrictions` in config.yml)
   worldedit_cancel_reason_no_region: geen toegestaand gebied (bypass with /wea, or
     disable `region-restrictions` in config.yml)
-  worldedit_failed_load_chunk: '&cChunks laden overgeslaan: &7%s0;%s1&c. probeer het
+  worldedit_failed_load_chunk: 'Chunks laden overgeslaan: %s0;%s1. probeer het
     chunk-wait op te krikken.'
 navigation:
   ascend_fail: Geen vrije plekken boven je gesignaleerd.
@@ -319,47 +319,47 @@ selection:
     klik om toe te voegen. om een lucht holte te selecteren, doe //pos1.'
   sel_convex_polyhedral: 'Convex polyhedral selector: Links klik=First vertex, rechts
     klik om meer toe te voegen.'
-  sel_list: Voor een lijst met selecties doe:&c //sel list
+  sel_list: 'Voor een lijst met selecties doe: //sel list'
   sel_modes: 'Selecteer één van de modes hier:'
 tips:
-  tip_sel_list: 'Tip: Zie de verschillende selectie modes met &c//sel list'
+  tip_sel_list: 'Tip: Zie de verschillende selectie modes met //sel list'
   tip_select_connected: 'Tip: Selecteer alle verbonden blokken met //sel fuzzy'
-  tip_set_pos1: 'Tip: Gebruik pos1 als een punt met &c//set pos1'
-  tip_farwand: 'Tip: Selecteer punten van ver weg met &c//farwand'
-  tip_lazycut: '&7Tip: Het is veiliger om &c//lazycut te gebruiken'
-  tip_fast: '&7Tip: Set fast and without undo using &c//fast'
-  tip_cancel: '&7Tip: gebruik &c//cancel &7 om een edit stop te zetten'
-  tip_mask: '&7Tip: Zet een globale bestemmings mask met &c/gmask'
-  tip_mask_angle: 'Tip: Vervang opwaartse hellingen van 3-20 blocks met&c //replace
+  tip_set_pos1: 'Tip: Gebruik pos1 als een punt met //set pos1'
+  tip_farwand: 'Tip: Selecteer punten van ver weg met //farwand'
+  tip_lazycut: 'Tip: Het is veiliger om //lazycut te gebruiken'
+  tip_fast: 'Tip: Set fast and without undo using //fast'
+  tip_cancel: 'Tip: gebruik //cancel  om een edit stop te zetten'
+  tip_mask: 'Tip: Zet een globale bestemmings mask met /gmask'
+  tip_mask_angle: 'Tip: Vervang opwaartse hellingen van 3-20 blocks met //replace
     /[-20][-3] bedrock'
-  tip_set_linear: '&7Tip: Zet een blok lineaire met &c//set #l3d[wood,bedrock]'
-  tip_surface_spread: '&7Tip: Verpsreid een oppervlakte met &c//set #surfacespread[5][0][5][#existing]'
-  tip_set_hand: '&7Tip: Gebruik je huide hand met &c//set hand'
-  tip_replace_regex: '&7&7Tip: Vervang door regex:&c //replace .*_log <pattern>'
-  tip_replace_regex_2: '&7&7Tip: Vervang door regex:&c //replace .*stairs[facing=(north|south)]
+  tip_set_linear: 'Tip: Zet een blok lineaire met //set #l3d[wood,bedrock]'
+  tip_surface_spread: 'Tip: Verpsreid een oppervlakte met //set #surfacespread[5][0][5][#existing]'
+  tip_set_hand: 'Tip: Gebruik je huide hand met //set hand'
+  tip_replace_regex: 'Tip: Vervang door regex: //replace .*_log <pattern>'
+  tip_replace_regex_2: 'Tip: Vervang door regex: //replace .*stairs[facing=(north|south)]
     <pattern>'
-  tip_replace_regex_3: '&7&7Tip: Vervang door operators:&c //replace water[level>2]
+  tip_replace_regex_3: 'Tip: Vervang door operators: //replace water[level>2]
     sand'
-  tip_replace_regex_4: '&7&7Tip: Vervang door operators:&c //replace true *[waterlogged=false]'
-  tip_replace_regex_5: '&7&7Tip: Vervang door operators:&c //replace true *[level-=1]'
-  tip_replace_id: '&7Tip: Vervang alleen het blok id:&c//replace woodenstair #id[cobblestair]'
-  tip_replace_light: 'Tip: Verwijder licht met with&c//replace #brightness[1][15]'
+  tip_replace_regex_4: 'Tip: Vervang door operators: //replace true *[waterlogged=false]'
+  tip_replace_regex_5: 'Tip: Vervang door operators: //replace true *[level-=1]'
+  tip_replace_id: 'Tip: Vervang alleen het blok id://replace woodenstair #id[cobblestair]'
+  tip_replace_light: 'Tip: Verwijder licht met with//replace #brightness[1][15]'
   tip_tab_complete: 'Tip: The replace command supports tab completion'
-  tip_flip: 'Tip: Mirror met &c//flip'
-  tip_deform: 'Tip: Verander het van vorm met &c//deform'
-  tip_transform: 'Tip: Zet een transform met &c//gtransform'
-  tip_copypaste: 'Tip: Plaats bij klikken met &c//br copypaste'
-  tip_source_mask: 'Tip: Zet een source mask met &c/gsmask <mask>&7'
-  tip_replace_marker: 'Tip: verander een blok in je volle klipbord met &c//replace
+  tip_flip: 'Tip: Mirror met //flip'
+  tip_deform: 'Tip: Verander het van vorm met //deform'
+  tip_transform: 'Tip: Zet een transform met //gtransform'
+  tip_copypaste: 'Tip: Plaats bij klikken met //br copypaste'
+  tip_source_mask: 'Tip: Zet een source mask met /gsmask <mask>'
+  tip_replace_marker: 'Tip: verander een blok in je volle klipbord met //replace
     wool #fullcopy'
-  tip_paste: 'Tip: Plaats met &c//paste'
+  tip_paste: 'Tip: Plaats met //paste'
   tip_lazycopy: 'Tip: Lazycopy is sneller'
-  tip_download: 'Tip: Probeer &c//download'
-  tip_rotate: 'Tip: Orïenteer met &c//rotate'
-  tip_copy_pattern: 'Tip: Om een pattern te gebruiken, probeer &c#copy'
+  tip_download: 'Tip: Probeer //download'
+  tip_rotate: 'Tip: Orïenteer met //rotate'
+  tip_copy_pattern: 'Tip: Om een pattern te gebruiken, probeer #copy'
   tip_regen_0: 'Tip: Gebruik een biome met /regen [biome]'
   tip_regen_1: 'Tip: Gebruik een seed met /regen [biome] [seed]'
-  tip_biome_pattern: 'Tip: Dee &c#biome[forest]&7 pattern kan ik elke opdracht gebruikt
+  tip_biome_pattern: 'Tip: Dee #biome[forest] pattern kan ik elke opdracht gebruikt
     worden'
   tip_biome_mask: 'Tip: Er wordt een restrictie geplaatst op de biome met `$jungle`
     mask'

worldedit-core/src/main/resources/ru/message.yml

@@ -1,68 +1,68 @@
 info:
-  prefix: '&8(&4&lFAWE&8)&r&7'
+  prefix: '(FAWE)'
   file_deleted: '%s0 был удален.'
-  schematic_pasting: '&7Вставка схематического файла. Это не может быть отменено.'
-  lighting_propogate_selection: '&7Освещение было распространено в %s0 чанках. (Примечание:
+  schematic_pasting: 'Вставка схематического файла. Это не может быть отменено.'
+  lighting_propogate_selection: 'Освещение было распространено в %s0 чанках. (Примечание:
     Для удаления освещения используйте //removelight)'
-  updated_lighting_selection: '&7Освещение было обновлено в %s0 чанках. (Это может
+  updated_lighting_selection: 'Освещение было обновлено в %s0 чанках. (Это может
     занять секунду для отправки пакетов)'
-  set_region: '&7Выделение установлено в вашем текущем регионе WorldEdit'
-  worldedit_command_limit: '&7Пожалуйста, подождите, пока ваше текущее действие завершится'
-  worldedit_delayed: '&7Пожалуйста, подождите, пока мы обрабатываем ваши действия
+  set_region: 'Выделение установлено в вашем текущем регионе WorldEdit'
+  worldedit_command_limit: 'Пожалуйста, подождите, пока ваше текущее действие завершится'
+  worldedit_delayed: 'Пожалуйста, подождите, пока мы обрабатываем ваши действия
     WorldEdit...'
-  worldedit_run: '&7Простите за задержку. Выполнение: %s'
-  worldedit_complete: '&7Действие WorldEdit выполнено.'
-  require_selection_in_mask: '&7%s вашего выделения не находится в пределах вашей
+  worldedit_run: 'Простите за задержку. Выполнение: %s'
+  worldedit_complete: 'Действие WorldEdit выполнено.'
+  require_selection_in_mask: '%s вашего выделения не находится в пределах вашей
     маски. Вы можете только вносить изменения в пределах разрешенных регионов.'
-  worldedit_volume: '&7Вы не можете выбрать значение %current%. Максимальное значение,
+  worldedit_volume: 'Вы не можете выбрать значение %current%. Максимальное значение,
     которое вы можете изменить - %max%.'
-  worldedit_iterations: '&7Вы не можете выполнить интерацию %current% раз. Максимальное
+  worldedit_iterations: 'Вы не можете выполнить интерацию %current% раз. Максимальное
     число допустимых итераций - %max%.'
-  worldedit_unsafe: '&7Доступ к этой команде был заблокирован!'
-  worldedit_dangerous_worldedit: '&cFAWE обрабатывает небезопасный WorldEdit в %s0
+  worldedit_unsafe: 'Доступ к этой команде был заблокирован!'
+  worldedit_dangerous_worldedit: 'FAWE обрабатывает небезопасный WorldEdit в %s0
     на %s1'
-  worldedit_toggle_tips_on: '&7Советы WorldEdit &cвключены&7.'
-  worldedit_toggle_tips_off: '&7Советы WorldEdit &cвключены&7.'
-  worldedit_bypassed: '&7Обход ограничений WorldEdit &cвключен&7.'
-  worldedit_unmasked: '&7Ваш WorldEdit теперь неограниченный.'
-  worldedit_restricted: '&7Обход ограничений WorldEdit &cвыключен&7.'
+  worldedit_toggle_tips_on: 'Советы WorldEdit включены.'
+  worldedit_toggle_tips_off: 'Советы WorldEdit включены.'
+  worldedit_bypassed: 'Обход ограничений WorldEdit включен.'
+  worldedit_unmasked: 'Ваш WorldEdit теперь неограниченный.'
+  worldedit_restricted: 'Обход ограничений WorldEdit выключен.'
   worldedit_oom_admin: |-
-    &cВозможные варианты:
-    &8 - &7//fast
-    &8 - &7Сделать небольшие изменения
-    &8 - &7Выделить больше памяти
-    &8 - &7Отключить `max-memory-percent`
+    Возможные варианты:
+     - //fast
+     - Сделать небольшие изменения
+     - Выделить больше памяти
+     - Отключить `max-memory-percent`
   compressed: История сжата. Сохранено ~ %s0b (%s1x меньше)
   action_complete: Действие выполенено за %s0 секунд
 error:
-  worldedit_extend: '&cВаше выделение WorldEdit может быть расширено за пределами
+  worldedit_extend: 'Ваше выделение WorldEdit может быть расширено за пределами
     разрешенного региона.'
-  command_syntax: '&cИспользование: &7%s0'
-  no_perm: '&cУ вас нет разрешения: %s0'
-  setting_disable: '&cОтсутствует параметр: %s0'
-  schematic_not_found: '&cСхематический файл не найден: &7%s0'
-  no_region: '&cУ вас нет текущего региона WorldEdit'
-  no_mask: '&cУ вас нет текущей установленой маски'
-  not_player: '&cВы должны быть игроком, чтобы выполнить это действие!'
-  player_not_found: '&cИгрок не найден:&7 %s0'
+  command_syntax: 'Использование: %s0'
+  no_perm: 'У вас нет разрешения: %s0'
+  setting_disable: 'Отсутствует параметр: %s0'
+  schematic_not_found: 'Схематический файл не найден: %s0'
+  no_region: 'У вас нет текущего региона WorldEdit'
+  no_mask: 'У вас нет текущей установленой маски'
+  not_player: 'Вы должны быть игроком, чтобы выполнить это действие!'
+  player_not_found: 'Игрок не найден: %s0'
   oom: |-
-    &8[&cОпасно&8] &cОбнаружено мало память, т.е. < 1%. FAWE предпримет следующие действия:
-    &8 - &7Прекратить размещение блоков WE
-    &8 - &7Очистить историю WE
-    &8 - &7Выгрузить не необходимые чанки
-    &8 - &7Убить энтити
-    &8 - &7Собрать мусор
-    &cИгнорирование этого может призвести к крашу сервера.
-    &7Примечание: Нехватка памяти скорее всего (но не обязательно) вызванно WE
-  worldedit_some_fails: '&c%s0 блок(ов) не были размещены, потому что они были за
+    [Опасно] Обнаружено мало память, т.е. < 1%. FAWE предпримет следующие действия:
+     - Прекратить размещение блоков WE
+     - Очистить историю WE
+     - Выгрузить не необходимые чанки
+     - Убить энтити
+     - Собрать мусор
+    Игнорирование этого может призвести к крашу сервера.
+    Примечание: Нехватка памяти скорее всего (но не обязательно) вызванно WE
+  worldedit_some_fails: '%s0 блок(ов) не были размещены, потому что они были за
     пределами вашего региона.'
-  worldedit_some_fails_blockbag: '&cНедостающие блоки: %s0'
+  worldedit_some_fails_blockbag: 'Недостающие блоки: %s0'
   web_unauthorized: 'Разрешены только ссылки с настроенного веб-хостинга: %s0'
-  brush_not_found: '&cДоступные кисти: %s0'
-  brush_incompatible: '&cКисть не совместима с этой версией'
+  brush_not_found: 'Доступные кисти: %s0'
+  brush_incompatible: 'Кисть не совместима с этой версией'
 web:
   generating_link: Загрузка %s, пожалуйста подождите...
-  generating_link_failed: '&cНе удалось создать ссылку!'
+  generating_link_failed: 'Не удалось создать ссылку!'
   download_link: '%s'
 worldedit:
   general:
@@ -88,7 +88,7 @@ worldedit:
   paste:
     command_paste: |-
       Буфер обмена был вставлен в %s0
-      Совет: Вставка по клику - &c//br copypaste
+      Совет: Вставка по клику - //br copypaste
   rotate:
     command_rotate: Буфер обмена был повернут
   flip:
@@ -133,8 +133,8 @@ worldedit:
   brush:
     brush_none: Вы не держите кисть!
     brush_try_other: |-
-      &cFAWE добавляет другие, более подходящие кисти, например,
-      &8 - &7//br height [radius=5] [#clipboard|file=null] [rotation=0] [yscale=1.00]
+      FAWE добавляет другие, более подходящие кисти, например,
+       - //br height [radius=5] [#clipboard|file=null] [rotation=0] [yscale=1.00]
     brush_copy: Кисть копирования сформирована (%s0). ПКМ по обьекту для копирования,
       ПКМ для вставки. При необходимости увеличьте радиус кисти.
     brush_height_invalid: Неверная высота файла карты (%s0)
@@ -167,8 +167,8 @@ worldedit:
     rollback_element: Отмена %s0
   tool:
     tool_inspect: Инструмент проверки связан с %s0.
-    tool_inspect_info: '&7%s0 изменено %s1 на %s2 %s3 назад'
-    tool_inspect_info_footer: '&6Всего: &7%s0 изменений'
+    tool_inspect_info: '%s0 изменено %s1 на %s2 %s3 назад'
+    tool_inspect_info_footer: 'Всего: %s0 изменений'
     tool_none: Инструмент больше не связан с вашим предметом.
     tool_info: Информационный инструмент связан с %s0.
     tool_tree: Инструмент Девера связан с %s0.
@@ -192,16 +192,16 @@ worldedit:
     schematic_page: Страница должна быть %s
     schematic_none: Схематических фалов не найдено.
     schematic_list: 'Доступные схематические файлы (Имя файла: Формат) [%s0/%s1]:'
-    schematic_prompt_clear: '&7Вы можете использовать &c%s0 &7очистить свой первый'
+    schematic_prompt_clear: 'Вы можете использовать %s0 очистить свой первый'
     schematic_show: |-
-      &7Отображение &a%s0&7 схемы из &a%s1&7:
-      &8 - &aЩелчок левой кнопкой мыши &7структура для настройки вашего буфера обмена
-      &8 - &aЩелкните правойt кнопкой мыши &7добавить структуру в ваш мультибуфер
-      &8 - &7использование &a%s2&7 вернуться в мир
-    schematic_move_exists: '&c%s0 уже существует'
-    schematic_move_success: '&a%s0 -> %s1'
-    schematic_move_failed: '&a%s0 нет перемещенных: %s1'
-    schematic_list_elem: '&8 - &a%s0 &8- &7%s1'
+      Отображение %s0 схемы из %s1:
+       - Щелчок левой кнопкой мыши структура для настройки вашего буфера обмена
+       - Щелкните правойt кнопкой мыши добавить структуру в ваш мультибуфер
+       - использование %s2 вернуться в мир
+    schematic_move_exists: '%s0 уже существует'
+    schematic_move_success: '%s0 -> %s1'
+    schematic_move_failed: '%s0 нет перемещенных: %s1'
+    schematic_list_elem: ' - %s0 - %s1'
   clipboard:
     clipboard_cleared: Буфер обмена очищен
     clipboard_invalid_format: 'Неизвестный формат буфера обмена:  %s0'
@@ -239,25 +239,25 @@ worldedit:
     timezone_set: 'Часовой пояс для этой сессии: %s0'
     timezone_display: 'Текущее время в этом часовом поясе:  %s0'
   navigation:
-    navigation_wand_error: '&cНичто не может пройти'
+    navigation_wand_error: 'Ничто не может пройти'
   anvil:
     world_is_loaded: Мир не должен использоваться во время исполнения. Выгрузить или использовать -f переопределить (сохранить сначала)
   help:
-    command_clarifying_bracket: '&7Added clarifying bracket for &c%s0'
-    help_suggest: '&7не мог найти %s0. Возможно, попробуйте один из &c%s1 &7?'
+    command_clarifying_bracket: 'Added clarifying bracket for %s0'
+    help_suggest: 'не мог найти %s0. Возможно, попробуйте один из %s1 ?'
     help_header_categories: Типы команд
     help_header_subcommands: Подкоманды
-    help_header_command: '&cПомогите за: &7%s0'
-    help_item_allowed: '&a%s0&8 - &7%s1'
-    help_item_denied: '&c%s0&8 - &7%s1'
+    help_header_command: 'Помогите за: %s0'
+    help_item_allowed: '%s0 - %s1'
+    help_item_denied: '%s0 - %s1'
     help_header: 'Помогите: страница %s0/%s1'
-    help_footer: '&7Wiki: https://git.io/vSKE5'
+    help_footer: 'Wiki: https://git.io/vSKE5'
 progress:
   progress_message: '[ Очередь: %s0 | Отправляется: %s1 ]'
   progress_finished: '[ Готово! ]'
 cancel:
-  worldedit_cancel_count: '&cОтменено %s0 изменений.'
-  worldedit_cancel_reason: '&cВаше действие WorldEdit было отменено:&7 %s0&c.'
+  worldedit_cancel_count: 'Отменено %s0 изменений.'
+  worldedit_cancel_reason: 'Ваше действие WorldEdit было отменено: %s0.'
   worldedit_cancel_reason_manual: Ручная отмена
   worldedit_cancel_reason_low_memory: Мало памяти
   worldedit_cancel_reason_max_changes: Слишком много блоков изменено
@@ -266,8 +266,8 @@ cancel:
   worldedit_cancel_reason_max_entities: Слишком много энтити
   worldedit_cancel_reason_max_iterations: Максимальное количество итераций
   worldedit_cancel_reason_no_region: Нет разрешенного региона (обход, используя /wea, или выключите `region-restrictions` в config.yml)
-  worldedit_failed_load_chunk: '&cПропущенные загруженные чанки: &7%s0;%s1&c. Попробуйте увеличить ожидание чанка.'
-  worldedit_cancel_reason_confirm: '&7Ваш выбор большой (&c%s0 &7-> &c%s1&7, содержащий &c%s3&7 блоки). использование &c//confirm &7выполнить &c%s2'
+  worldedit_failed_load_chunk: 'Пропущенные загруженные чанки: %s0;%s1. Попробуйте увеличить ожидание чанка.'
+  worldedit_cancel_reason_confirm: 'Ваш выбор большой (%s0 -> %s1, содержащий %s3 блоки). использование //confirm выполнить %s2'
   worldedit_cancel_reason_outside_level: внешний мир
   worldedit_cancel_reason_outside_region: Вне допустимой области (обход с /wea, или отключить `region-restrictions` в config.yml)
 history: {}
@@ -294,36 +294,36 @@ selection:
   sel_max: '%s0 максимум точек.'
   sel_fuzzy: 'Нечеткое выделение: ЛКМ, чтобы выбрать все условные блоки, ПКМ, чтобы добавить'
   sel_convex_polyhedral: 'Выпуклое многогранное выделение: ЛКМ - первая вершина, ПКМ для добавления больше.'
-  sel_list: Для получения списка типов выделения используйте:&c //sel list
+  sel_list: Для получения списка типов выделения используйте: //sel list
   sel_modes: 'Выберите один из перечисленных режимов ниже:'
 tips:
-  tip_sel_list: 'Совет: Смотрите различные режимы выделения - &c//sel list'
+  tip_sel_list: 'Совет: Смотрите различные режимы выделения - //sel list'
   tip_select_connected: 'Совет: Выберите все подключенные блоки - //sel fuzzy'
-  tip_set_pos1: 'Совет: Используйте Pos1 как шаблон - &c//set pos1'
-  tip_farwand: 'Совет: Выберите удаленные точки - &c//farwand'
-  tip_fast: '&7Совет: Установить быстро и без отмены, используя &c//fast'
-  tip_cancel: '&7Совет: Вы можете &c//cancel &7от изменений в процессе'
-  tip_mask: '&7Совет: Задайте маску глобального назначения - &c/gmask'
-  tip_mask_angle: 'Совет: Заменить верхний слой 3-20 блоков -&c //replace /-20:-3 bedrock'
-  tip_set_linear: '&7Совет: Установка блоков -&c //set #l3d:wood,bedrock'
-  tip_surface_spread: '&7Совет: Распространение плоской поверхности -&c //set #surfacespread:5:0:5:#existing'
-  tip_set_hand: '&7Совет: Используйте свою текущую руку - &c//set hand'
-  tip_replace_id: '&7Совет: Заменить только ID блока -&c //replace woodenstair #id:cobblestair'
-  tip_replace_light: 'Совет: Удалить источники света -&c //replace #brightness:1:15 0'
+  tip_set_pos1: 'Совет: Используйте Pos1 как шаблон - //set pos1'
+  tip_farwand: 'Совет: Выберите удаленные точки - //farwand'
+  tip_fast: 'Совет: Установить быстро и без отмены, используя //fast'
+  tip_cancel: 'Совет: Вы можете //cancel от изменений в процессе'
+  tip_mask: 'Совет: Задайте маску глобального назначения - /gmask'
+  tip_mask_angle: 'Совет: Заменить верхний слой 3-20 блоков - //replace /-20:-3 bedrock'
+  tip_set_linear: 'Совет: Установка блоков - //set #l3d:wood,bedrock'
+  tip_surface_spread: 'Совет: Распространение плоской поверхности - //set #surfacespread:5:0:5:#existing'
+  tip_set_hand: 'Совет: Используйте свою текущую руку - //set hand'
+  tip_replace_id: 'Совет: Заменить только ID блока - //replace woodenstair #id:cobblestair'
+  tip_replace_light: 'Совет: Удалить источники света - //replace #brightness:1:15 0'
   tip_tab_complete: 'Совет: Команда replace поддерживает автозаполение'
-  tip_flip: 'Совет: Отобразить - &c//flip'
-  tip_deform: 'Совет: Изменить - &c//deform'
-  tip_transform: 'Совет: Установка преобразования - &c//gtransform'
-  tip_copypaste: 'Совет: Вставка по клику - &c//br copypaste'
-  tip_source_mask: 'Совет: Установить маску источника - &c/gsmask <mask>&7'
-  tip_replace_marker: 'Совет: Замените блок с помощью полного буфера обмена - &c//replace wool #fullcopy'
-  tip_paste: 'Совет: Вставить - &c//paste'
+  tip_flip: 'Совет: Отобразить - //flip'
+  tip_deform: 'Совет: Изменить - //deform'
+  tip_transform: 'Совет: Установка преобразования - //gtransform'
+  tip_copypaste: 'Совет: Вставка по клику - //br copypaste'
+  tip_source_mask: 'Совет: Установить маску источника - /gsmask <mask>'
+  tip_replace_marker: 'Совет: Замените блок с помощью полного буфера обмена - //replace wool #fullcopy'
+  tip_paste: 'Совет: Вставить - //paste'
   tip_lazycopy: 'Совет: lazycopy быстрее'
-  tip_download: 'Совет: Попробовать - &c//download'
-  tip_rotate: 'Совет: Ориентация - &c//rotate'
-  tip_copy_pattern: 'Совет: Для использования шаблона используйте &c#copy'
-  tip_lazycut: '&7Совет: Это безопаснее использовать &c//lazycut'
-  tip_regen_0: 'Совет: Используйте биом - &c/regen [biome]'
-  tip_regen_1: 'Совет: Используйте сид - &c/regen [biome] [seed]'
-  tip_biome_pattern: 'Tip: The &c#biome[forest]&7 pattern can be used in any command'
+  tip_download: 'Совет: Попробовать - //download'
+  tip_rotate: 'Совет: Ориентация - //rotate'
+  tip_copy_pattern: 'Совет: Для использования шаблона используйте #copy'
+  tip_lazycut: 'Совет: Это безопаснее использовать //lazycut'
+  tip_regen_0: 'Совет: Используйте биом - /regen [biome]'
+  tip_regen_1: 'Совет: Используйте сид - /regen [biome] [seed]'
+  tip_biome_pattern: 'Tip: The #biome[forest] pattern can be used in any command'
   tip_biome_mask: 'Tip: Restrict to a biome with the `$jungle` mask'

worldedit-core/src/main/resources/tr/message.yml

@@ -1,298 +1,298 @@
 ınfo:
-  prefıx: "&2&lS&c&lO &e>"
-  fıle_deleted: "&c%s0 &eBaşarıyla Silindi."
-  schematıc_pastıng: "&eSchematic Yapıştırılıyor. &4Geri Alınamaz."
-  lıghtıng_propogate_selectıon: "&eAydınlatma &c%s0 &eParçaya Ayrılmıştır. &7(&4Not: &aAydınlatmayı Kaldırmak İçin: &d//removelight&7)"
-  updated_lıghtıng_selectıon: "&eAydınlatma &c%s0 &eChunk Olarak Güncellendi. &7(&aPaketlerin Gönderilmesi Zaman Alabilir&7)"
-  set_regıon: "&eSeçim, İzin Verilen Bölgenize Ayarlandı"
-  worldedıt_command_limit: "&7Lütfen Mevcut İşleminiz Tamamlanıncaya Kadar Bekleyin"
-  worldedıt_delayed: "&eFAWE İşleminizi Gerçekleştirirken Lütfen Bekleyin..."
-  worldedıt_run: "&eŞuan Yürütülüyor: &c%s"
-  worldedıt_complete: "&aDüzenleme Tamamlandı."
-  requıre_selectıon_ın_mask: "&eSeçiminizden &c%s &eTanesi Maskenizin İçinde Değil. Yalnızca İzin Verilen Bölgelerde Düzenlemeler Yapabilirsiniz."
-  worldedıt_volume: "&eHacim &c%current% &eOlamaz. &eMaksimum Hacim: &c%max%."
-  worldedıt_ıteratıons: "&c%current% &eKere Tekrar Edemezsin. Maksimum &c%max% &eDefa Tekrar Edebilirsin."
-  worldedıt_unsafe: "&cBu Komuta Erişim Engellendi"
-  worldedıt_dangerous_worldedıt: "&cİşlenmiş Güvensiz Düzenleme: &2%s0 &c%s1 &eTarafından"
-  worldedıt_toggle_tıps_on: "&eFAWE İpuçları Devre Dışı Bırakıldı."
-  worldedıt_toggle_tıps_off: "&eFAWE İpuçları Aktif Edildi."
-  worldedıt_bypassed: "&eŞuanda FAWE Kısıtlamasını Atlıyor."
-  worldedıt_unmasked: "&cFAWE Düzenlemeleriniz Artık Sınırsız."
-  worldedıt_restrıcted: "&cFAWE Düzenlemeleriniz Artık Sınırlandırıldı."
+  prefıx: "&lS&lO >"
+  fıle_deleted: "%s0 Başarıyla Silindi."
+  schematıc_pastıng: "Schematic Yapıştırılıyor. Geri Alınamaz."
+  lıghtıng_propogate_selectıon: "Aydınlatma %s0 Parçaya Ayrılmıştır. (Not: Aydınlatmayı Kaldırmak İçin: //removelight)"
+  updated_lıghtıng_selectıon: "Aydınlatma %s0 Chunk Olarak Güncellendi. (Paketlerin Gönderilmesi Zaman Alabilir)"
+  set_regıon: "Seçim, İzin Verilen Bölgenize Ayarlandı"
+  worldedıt_command_limit: "Lütfen Mevcut İşleminiz Tamamlanıncaya Kadar Bekleyin"
+  worldedıt_delayed: "FAWE İşleminizi Gerçekleştirirken Lütfen Bekleyin..."
+  worldedıt_run: "Şuan Yürütülüyor: %s"
+  worldedıt_complete: "Düzenleme Tamamlandı."
+  requıre_selectıon_ın_mask: "Seçiminizden %s Tanesi Maskenizin İçinde Değil. Yalnızca İzin Verilen Bölgelerde Düzenlemeler Yapabilirsiniz."
+  worldedıt_volume: "Hacim %current% Olamaz. Maksimum Hacim: %max%."
+  worldedıt_ıteratıons: "%current% Kere Tekrar Edemezsin. Maksimum %max% Defa Tekrar Edebilirsin."
+  worldedıt_unsafe: "Bu Komuta Erişim Engellendi"
+  worldedıt_dangerous_worldedıt: "İşlenmiş Güvensiz Düzenleme: %s0 %s1 Tarafından"
+  worldedıt_toggle_tıps_on: "FAWE İpuçları Devre Dışı Bırakıldı."
+  worldedıt_toggle_tıps_off: "FAWE İpuçları Aktif Edildi."
+  worldedıt_bypassed: "Şuanda FAWE Kısıtlamasını Atlıyor."
+  worldedıt_unmasked: "FAWE Düzenlemeleriniz Artık Sınırsız."
+  worldedıt_restrıcted: "FAWE Düzenlemeleriniz Artık Sınırlandırıldı."
   worldedıt_oom_admın: |-
-    &cMümkün Ayarlar:
-    &8 - &7//fast
-    &8 - &7Daha Küçük Düzenlemeler Yapın
-    &8 - &7Daha Fazla Bellek Ayırın
-    &8 - &7`max-memory-percent` Ayarını Kapatın
-  compressed: "&eGeçmiş Sıkıştırldı. &a%s0b &eKaydedildi. &7(%s1x &eDaha Küçük&7)"
-  actıon_complete: "&eİşlem &a%s0 &eSaniyede Tamamlandı"
+    Mümkün Ayarlar:
+     - //fast
+     - Daha Küçük Düzenlemeler Yapın
+     - Daha Fazla Bellek Ayırın
+     - `max-memory-percent` Ayarını Kapatın
+  compressed: "Geçmiş Sıkıştırldı. %s0b Kaydedildi. (%s1x Daha Küçük)"
+  actıon_complete: "İşlem %s0 Saniyede Tamamlandı"
 error:
-  worldedıt_extend: "&cDüzenlemeniz İzin Verilen Bölgenizin Dışına Çıkmış Olabilir."
-  web_unauthorızed: "&eSadece Yapılandırılmış Siteden Gelen Bağlantılara İzin Verilir: &a%s0"
-  command_syntax: "&bKullanımı: &a%s0"
-  no_perm: "&cBunun İçin Yetkin YOK: &a%s0"
-  settıng_dısable: "&cEksik Ayar: &a%s0"
-  brush_not_found: "&cKullanılabilir Fırçalar: &a%s0"
-  brush_ıncompatıble: "&cFırçalar Bu Sürüm İle Uyumlu Değil"
-  schematıc_not_found: "&cSchematic Bulunamadı: &a%s0"
-  no_regıon: "&cİzin Verilen Bölge YOK"
-  no_mask: "&cHenüz Maske Ayarlamamışsın"
-  not_player: "&cDostum Bunun Icin Oyuncu Olmalisin!"
-  player_not_found: "&cOyuncu Bulunamadı: &a%s0"
+  worldedıt_extend: "Düzenlemeniz İzin Verilen Bölgenizin Dışına Çıkmış Olabilir."
+  web_unauthorızed: "Sadece Yapılandırılmış Siteden Gelen Bağlantılara İzin Verilir: %s0"
+  command_syntax: "Kullanımı: %s0"
+  no_perm: "Bunun İçin Yetkin YOK: %s0"
+  settıng_dısable: "Eksik Ayar: %s0"
+  brush_not_found: "Kullanılabilir Fırçalar: %s0"
+  brush_ıncompatıble: "Fırçalar Bu Sürüm İle Uyumlu Değil"
+  schematıc_not_found: "Schematic Bulunamadı: %s0"
+  no_regıon: "İzin Verilen Bölge YOK"
+  no_mask: "Henüz Maske Ayarlamamışsın"
+  not_player: "Dostum Bunun Icin Oyuncu Olmalisin!"
+  player_not_found: "Oyuncu Bulunamadı: %s0"
   oom: |-
-    &8[&cKritik&8] &cDüşük Bellek Algılandı < 1%. Aşağıdaki İşlemleri Yapmalısınız:
-    &8 - &7WorldEdit Blok Yerleştirmesini Sonlandır
-    &8 - &7WorldEdit Geçmişini Temizle
-    &8 - &7Gereksiz Chunkları Sil
-    &8 - &7Yaratıkları Öldür
-    &8 - &7Çöpleri Topla
-    &7Not: Düşük Belleğin Sebebi WorldEdit Olabilir !!
-  worldedıt_some_faıls: "&eİzin Verilen Bölgenizin Dışında Olduğu İçin &c%s0 &eBlok Yerleştirilemedi."
-  worldedıt_some_faıls_blockbag: "&cEksik Bloklar: &a%s0"
+    [Kritik] Düşük Bellek Algılandı < 1%. Aşağıdaki İşlemleri Yapmalısınız:
+     - WorldEdit Blok Yerleştirmesini Sonlandır
+     - WorldEdit Geçmişini Temizle
+     - Gereksiz Chunkları Sil
+     - Yaratıkları Öldür
+     - Çöpleri Topla
+    Not: Düşük Belleğin Sebebi WorldEdit Olabilir !!
+  worldedıt_some_faıls: "İzin Verilen Bölgenizin Dışında Olduğu İçin %s0 Blok Yerleştirilemedi."
+  worldedıt_some_faıls_blockbag: "Eksik Bloklar: %s0"
 web:
-  generatıng_lınk: "&eYükleniyor: &a%s&7, &eLütfen Bekleyin..."
-  generatıng_lınk_faıled: "&cİndirme Linki Oluşturulurken Hata Oldu!"
-  download_lınk: "&c%s"
+  generatıng_lınk: "Yükleniyor: %s, Lütfen Bekleyin..."
+  generatıng_lınk_faıled: "İndirme Linki Oluşturulurken Hata Oldu!"
+  download_lınk: "%s"
 worldedıt:
   general:
-    mask_dısabled: "&eGenel Maske Devre Dışı Bırakıldı"
-    mask: "&eGenel Maske Ayarlandı"
-    source_mask_dısabled: "&eGenel Kaynak Maskesi Devre Dışı Bırakıldı"
-    source_mask: "&eGenel Kaynak Maskesi Ayarlandı"
-    transform_dısabled: "&eGenel Dönüştürücü Devre Dışı Bırakıldı"
-    transform: "&eGenel Dönüştürücü Ayarlandı"
-    fast_enabled: "&eHızlı Mod Aktifleştirildi. Geçmiş ve Düzenleme Kısıtlamaları Atlanacak."
-    fast_dısabled: "&eHızlı Mod Devre Dışı Bırakıldı"
-    place_enabled: "&EPozisyon 1'e YerleÅŸtirildi."
-    place_dısabled: "&eDurduğun Bloğa Yerleştiriliyor."
+    mask_dısabled: "Genel Maske Devre Dışı Bırakıldı"
+    mask: "Genel Maske Ayarlandı"
+    source_mask_dısabled: "Genel Kaynak Maskesi Devre Dışı Bırakıldı"
+    source_mask: "Genel Kaynak Maskesi Ayarlandı"
+    transform_dısabled: "Genel Dönüştürücü Devre Dışı Bırakıldı"
+    transform: "Genel Dönüştürücü Ayarlandı"
+    fast_enabled: "Hızlı Mod Aktifleştirildi. Geçmiş ve Düzenleme Kısıtlamaları Atlanacak."
+    fast_dısabled: "Hızlı Mod Devre Dışı Bırakıldı"
+    place_enabled: "Pozisyon 1'e YerleÅŸtirildi."
+    place_dısabled: "Durduğun Bloğa Yerleştiriliyor."
   copy:
-    command_copy: "&c%s0 &eBlok Kopyalandı."
+    command_copy: "%s0 Blok Kopyalandı."
   cut:
-    command_cut_slow: "&c%s0 &eBlok Kesildi."
-    command_cut_lazy: "&eYapıştırılandan &c%s0 &eBlok Kaldırılacak"
+    command_cut_slow: "%s0 Blok Kesildi."
+    command_cut_lazy: "Yapıştırılandan %s0 Blok Kaldırılacak"
   paste:
-    command_paste: "&ePano Yapıştırıldı: &a%s0"
+    command_paste: "Pano Yapıştırıldı: %s0"
   rotate:
-    command_rotate: "&ePano Döndürüldü"
+    command_rotate: "Pano Döndürüldü"
   flip:
-    command_flıpped: "&ePano Çevirildi."
+    command_flıpped: "Pano Çevirildi."
   regen:
-    command_regen_0: "&eBölge Yeniden Oluşturuldu."
-    command_regen_1: "&eBölge Yeniden Oluşturuldu."
-    command_regen_2: "&eBölge Yeniden Oluşturuldu."
+    command_regen_0: "Bölge Yeniden Oluşturuldu."
+    command_regen_1: "Bölge Yeniden Oluşturuldu."
+    command_regen_2: "Bölge Yeniden Oluşturuldu."
   tree:
-    command_tree: "&c%s0 &eAğacı Oluşturuldu."
-    command_pumpkın: "&c%s0 &eKabak Yamaları Oluşturuldu."
+    command_tree: "%s0 Ağacı Oluşturuldu."
+    command_pumpkın: "%s0 Kabak Yamaları Oluşturuldu."
   flora:
-    command_flora: "&c%s0 &eBitki Örtüsü Oluşturuldu."
+    command_flora: "%s0 Bitki Örtüsü Oluşturuldu."
   history:
-    command_hıstory_clear: "&eGeçiş Temizlendi"
-    command_redo_error: "&eGeriye Alma Eylemi Bulunamadı."
-    command_hıstory_other_error: "&c%s0 &eOturumu Bulunamadı."
-    command_redo_success: "&aGeri Almayı Geri Alma Başarılı."
-    command_undo_error: "&cGeri Alınacak Bir İşlem Bulunamadı."
-    command_undo_success: "&aGeri Alma Başarılı."
+    command_hıstory_clear: "Geçiş Temizlendi"
+    command_redo_error: "Geriye Alma Eylemi Bulunamadı."
+    command_hıstory_other_error: "%s0 Oturumu Bulunamadı."
+    command_redo_success: "Geri Almayı Geri Alma Başarılı."
+    command_undo_error: "Geri Alınacak Bir İşlem Bulunamadı."
+    command_undo_success: "Geri Alma Başarılı."
   operation:
-    operatıon: "&eİşlem Sıraya Alındı: &7(&a%s0&7)"
+    operatıon: "İşlem Sıraya Alındı: (%s0)"
   selection:
-    selectıon_wand: "&eSol_Tıklama: &a1. Pozisyonu Ayarlar&7; &eSağ_Tıklama: &a2. Pozisyonu Ayarlar"
-    selectıon_wand_dısable: "&eWand Devre Dışı Bırakıldı."
-    selectıon_wand_enable: "&eWand Aktifleştirildi."
-    selectıon_chunk: "&eChunk Seçildi: &7(&a%s0&7)"
-    selectıon_chunks: "&eChunk Seçildi: &7(&2%s0&7) - (&c%s1&7)"
-    selectıon_contract: "&eBölge &c%s0 &eBlok Taahhüt Edildi."
-    selectıon_count: "&c%s0 &eBlok Sayıldı."
-    selectıon_dıstr: "&eToplam Blok: &c%s0"
-    selectıon_expand: "&eBölge &c%s0 &eBlok Genişletildi"
-    selectıon_expand_vert: "&eBölge &c%s0 &eBlok Genişletildi &7(&aYukarıdan Aşağıya&7)"
-    selectıon_ınset: "&eBölge Girişi"
-    selectıon_outset: "&eBölge Başlangıcı"
-    selectıon_shıft: "&eBölge Kaydırıldı"
-    selectıon_cleared: "&eSeçimler Temizlendi"
+    selectıon_wand: "Sol_Tıklama: 1. Pozisyonu Ayarlar; Sağ_Tıklama: 2. Pozisyonu Ayarlar"
+    selectıon_wand_dısable: "Wand Devre Dışı Bırakıldı."
+    selectıon_wand_enable: "Wand Aktifleştirildi."
+    selectıon_chunk: "Chunk Seçildi: (%s0)"
+    selectıon_chunks: "Chunk Seçildi: (%s0) - (%s1)"
+    selectıon_contract: "Bölge %s0 Blok Taahhüt Edildi."
+    selectıon_count: "%s0 Blok Sayıldı."
+    selectıon_dıstr: "Toplam Blok: %s0"
+    selectıon_expand: "Bölge %s0 Blok Genişletildi"
+    selectıon_expand_vert: "Bölge %s0 Blok Genişletildi (Yukarıdan Aşağıya)"
+    selectıon_ınset: "Bölge Girişi"
+    selectıon_outset: "Bölge Başlangıcı"
+    selectıon_shıft: "Bölge Kaydırıldı"
+    selectıon_cleared: "Seçimler Temizlendi"
   navigation:
-    navıgatıon_wand_error: "&cDostum Gidecek Bir Yer YOK"
+    navıgatıon_wand_error: "Dostum Gidecek Bir Yer YOK"
   anvil:
-    world_ıs_loaded: "&eDünya Yürütülürken Kullanılmamlıdır. Dünya Kaydını Sil, ya da Geçersiz Kılmak İçin -f Kullanın &7(&aÖnce Kaydedin&7)"
+    world_ıs_loaded: "Dünya Yürütülürken Kullanılmamlıdır. Dünya Kaydını Sil, ya da Geçersiz Kılmak İçin -f Kullanın (Önce Kaydedin)"
   brush:
-    brush_reset: "&eFırçanı Sıfırla."
-    brush_none: "&cDostum Fırça Tutmuyorsun!"
-    brush_scroll_action_set: "&eKaydırma Eylemini &c%s0 &eOlarak Ayarla"
-    brush_scroll_action_unset: "&eKaydırma Eylemini Kaldır"
-    brush_vısual_mode_set: "&eGörsel Modu &c%s0 &eOlarak Ayarla"
-    brush_target_mode_set: "&eHedef Modu &c%s0 &eOlarak Ayarla"
-    brush_target_mask_set: "&eHedef Maskesini &c%s0 &eOlarak Ayarla"
-    brush_target_offset_set: "&eHedef Ofsetini &c%s0 &eOlarak Ayarla"
-    brush_equıpped: "&eDonatılmış Fırça: &c%s0"
+    brush_reset: "Fırçanı Sıfırla."
+    brush_none: "Dostum Fırça Tutmuyorsun!"
+    brush_scroll_action_set: "Kaydırma Eylemini %s0 Olarak Ayarla"
+    brush_scroll_action_unset: "Kaydırma Eylemini Kaldır"
+    brush_vısual_mode_set: "Görsel Modu %s0 Olarak Ayarla"
+    brush_target_mode_set: "Hedef Modu %s0 Olarak Ayarla"
+    brush_target_mask_set: "Hedef Maskesini %s0 Olarak Ayarla"
+    brush_target_offset_set: "Hedef Ofsetini %s0 Olarak Ayarla"
+    brush_equıpped: "Donatılmış Fırça: %s0"
     brush_try_other: |-
-      &cBelki Daha Uygun Başka Fırçalar Vardır:
-      &8 - &7//br height [radius=5] [#clipboard|file=null] [rotation=0] [yscale=1.00]
-    brush_copy: "&eKopyalamak İçin Bir Nesnenin Tabanına Sol_Tıklayın, Yapıştırmak İçin Sağ_Tıklayın. Gerekirse Fırça Yarıçapını Arttırın."
-    brush_heıght_ınvalıd: "&eGeçersiz Yükseklik Haritası Dosyası: &7(&c%s0&7)"
-    brush_smooth: "&aNot: &eÇıkıntıları veya Mağaraları Yumuşatmak İstiyorsanız Harman Fırçasını Kullanın."
-    brush_splıne: "&eNokta Eklemek İçin Tıklayın, Bitirmek İçin Aynı Noktaya Tıklayın"
-    brush_lıne_prımary: "&c%s0 &eNoktası Eklendi, Satırı Oluşturmak İçin Başka Bir Konuma Tıklayın"
-    brush_lıne_secondary: "&eDelik Oluşturuldu"
-    brush_splıne_prımary_2: "&ePozisyon Eklendi, Katılmak İçin Aynı Noktaya Tıklayın!"
-    brush_splıne_secondary_error: "&cYeterince Pozisyon Ayarlanmadı!"
-    brush_splıne_secondary: "&eDelik Oluşturuldu"
-    brush_sıze: "&eFırça Boyutu Ayarlandı"
-    brush_range: "&eFırça Menzili Ayarlandı"
-    brush_mask_dısabled: "&eFırça Maskesi Devre Dışı Bırakıldı"
-    brush_mask: "&eFırça Maskesi Ayarlandı"
-    brush_source_mask_dısabled: "&eFırça Kaynak Maskesi Devre Dışı Bırakıldı"
-    brush_source_mask: "&eFırça Kaynak Maskesi Ayarlandı"
-    brush_transform_dısabled: "&eFırça Dönüştürücü Devre Dışı Bırakıldı"
-    brush_transform: "&eFırça Dönüştürücü Ayarlandı"
-    brush_materıal: "&eFırça Malzemesi Ayarlandı"
+      Belki Daha Uygun Başka Fırçalar Vardır:
+       - //br height [radius=5] [#clipboard|file=null] [rotation=0] [yscale=1.00]
+    brush_copy: "Kopyalamak İçin Bir Nesnenin Tabanına Sol_Tıklayın, Yapıştırmak İçin Sağ_Tıklayın. Gerekirse Fırça Yarıçapını Arttırın."
+    brush_heıght_ınvalıd: "Geçersiz Yükseklik Haritası Dosyası: (%s0)"
+    brush_smooth: "Not: Çıkıntıları veya Mağaraları Yumuşatmak İstiyorsanız Harman Fırçasını Kullanın."
+    brush_splıne: "Nokta Eklemek İçin Tıklayın, Bitirmek İçin Aynı Noktaya Tıklayın"
+    brush_lıne_prımary: "%s0 Noktası Eklendi, Satırı Oluşturmak İçin Başka Bir Konuma Tıklayın"
+    brush_lıne_secondary: "Delik Oluşturuldu"
+    brush_splıne_prımary_2: "Pozisyon Eklendi, Katılmak İçin Aynı Noktaya Tıklayın!"
+    brush_splıne_secondary_error: "Yeterince Pozisyon Ayarlanmadı!"
+    brush_splıne_secondary: "Delik Oluşturuldu"
+    brush_sıze: "Fırça Boyutu Ayarlandı"
+    brush_range: "Fırça Menzili Ayarlandı"
+    brush_mask_dısabled: "Fırça Maskesi Devre Dışı Bırakıldı"
+    brush_mask: "Fırça Maskesi Ayarlandı"
+    brush_source_mask_dısabled: "Fırça Kaynak Maskesi Devre Dışı Bırakıldı"
+    brush_source_mask: "Fırça Kaynak Maskesi Ayarlandı"
+    brush_transform_dısabled: "Fırça Dönüştürücü Devre Dışı Bırakıldı"
+    brush_transform: "Fırça Dönüştürücü Ayarlandı"
+    brush_materıal: "Fırça Malzemesi Ayarlandı"
   rollback:
-    rollback_element: "&eTamamlanmadı: &c%s0"
+    rollback_element: "Tamamlanmadı: %s0"
   tool:
-    tool_ınspect: "&c%s0 &eBağlı Aleti Kontrol Edin."
-    tool_ınspect_ınfo: "&c%s0 &eDeğiştirildi: &2%s1&e'den &c%s2 %s3 &eÖnce"
-    tool_ınspect_ınfo_footer: "&eToplam: &c%s0 &aDeğiştirildi."
-    tool_none: "&eElindeki Eşyaya Hiçbir Özellik Bağlı &cDeğil."
-    tool_ınfo: "&eBilgi Aracı Bağlı: &c%s0."
-    tool_tree: "&eAğaç Aracı Bağlı: &c%s0."
-    tool_tree_error: "&c%s0 &eTipinde Ağaç Bulunamadı."
-    tool_repl: "&eBlok Değiştirici Bağlı: &c%s0."
-    tool_cycler: "&eBlok Verisi Değiştirici Bağlı: &c%s0."
-    tool_flood_fıll: "&eBlok Dolgu Aleti Bağlı: &c%s0."
-    tool_range_error: "&eMaksimum Mesafe: &c%s0."
-    tool_radıus_error: "&eİzin Verilen Maksimum Mesafe: &c%s0."
-    tool_deltree: "&eAğaç Kaldırıcı Bağlı: &c%s0."
-    tool_farwand: "&eFarWant Bağlı: &c%s0."
-    tool_lrbuıld_bound: "&eUzun Menzilli Yapı Aracı &c%s0 &eBağlı."
-    tool_lrbuıld_ınfo: "&a%s0 &eAyarlamak İçin Sol_Tıklayın&7; &c%s1 &eAyarlamak İçin Sağ_Tıklayın."
-    superpıckaxe_enabled: "&eSüper Kazma &aAçıldı."
-    superpıckaxe_dısabled: "&eSüper Kazma &cKapatıldı."
-    superpıckaxe_area_enabled: "&eMod Değiştirildi. Bir Kazmaya Sol_Tıklayın. Kapatmak İçin: &a//"
+    tool_ınspect: "%s0 Bağlı Aleti Kontrol Edin."
+    tool_ınspect_ınfo: "%s0 Değiştirildi: %s1'den %s2 %s3 Önce"
+    tool_ınspect_ınfo_footer: "Toplam: %s0 Değiştirildi."
+    tool_none: "Elindeki Eşyaya Hiçbir Özellik Bağlı Değil."
+    tool_ınfo: "Bilgi Aracı Bağlı: %s0."
+    tool_tree: "Ağaç Aracı Bağlı: %s0."
+    tool_tree_error: "%s0 Tipinde Ağaç Bulunamadı."
+    tool_repl: "Blok Değiştirici Bağlı: %s0."
+    tool_cycler: "Blok Verisi Değiştirici Bağlı: %s0."
+    tool_flood_fıll: "Blok Dolgu Aleti Bağlı: %s0."
+    tool_range_error: "Maksimum Mesafe: %s0."
+    tool_radıus_error: "İzin Verilen Maksimum Mesafe: %s0."
+    tool_deltree: "Ağaç Kaldırıcı Bağlı: %s0."
+    tool_farwand: "FarWant Bağlı: %s0."
+    tool_lrbuıld_bound: "Uzun Menzilli Yapı Aracı %s0 Bağlı."
+    tool_lrbuıld_ınfo: "%s0 Ayarlamak İçin Sol_Tıklayın; %s1 Ayarlamak İçin Sağ_Tıklayın."
+    superpıckaxe_enabled: "Süper Kazma Açıldı."
+    superpıckaxe_dısabled: "Süper Kazma Kapatıldı."
+    superpıckaxe_area_enabled: "Mod Değiştirildi. Bir Kazmaya Sol_Tıklayın. Kapatmak İçin: //"
   snapshot:
-    snapshot_loaded: "&c%s0 &eBellek Kopyası Yüklendi; Şuan Kuruluyor..."
-    snapshot_set: "&eBellek Kopyası Ayarlandı: &a%s0"
-    snapshot_newest: "&eEn Son Yayınlanan Bellek Kopyasını Kullanıyorsunuz."
-    snapshot_lıst_header: "&7(&c%s0&7) &eDünyası İçin Bellek Kopyaları:"
-    snapshot_lıst_footer: "&b/snap use <SnapShot> &eya da &b/snap use latest &eKomutlarını Kullanarak Bellek Kopyasını Değiştirebilirsin."
+    snapshot_loaded: "%s0 Bellek Kopyası Yüklendi; Şuan Kuruluyor..."
+    snapshot_set: "Bellek Kopyası Ayarlandı: %s0"
+    snapshot_newest: "En Son Yayınlanan Bellek Kopyasını Kullanıyorsunuz."
+    snapshot_lıst_header: "(%s0) Dünyası İçin Bellek Kopyaları:"
+    snapshot_lıst_footer: "/snap use <SnapShot> ya da /snap use latest Komutlarını Kullanarak Bellek Kopyasını Değiştirebilirsin."
   biome:
-    bıome_lıst_header: "&eBiyomlar &7(&aSayfa: &2%s0&7/&c%s1&7):"
-    bıome_changed: "&eBiyomlar &c%s0 &eSütunda Değiştirildi."
+    bıome_lıst_header: "Biyomlar (Sayfa: %s0/%s1):"
+    bıome_changed: "Biyomlar %s0 Sütunda Değiştirildi."
   utility:
-    kıll_success: "&a%s1 &eYarıçapında &c%s0 &eYaratık Öldürüldü."
-    nothıng_confırmed: "&cOnay Bekleyen Hiçbir İşlemin YOK."
-    page_footer: "&eBir Sonraki Sayfa İçin: &a%s0"
+    kıll_success: "%s1 Yarıçapında %s0 Yaratık Öldürüldü."
+    nothıng_confırmed: "Onay Bekleyen Hiçbir İşlemin YOK."
+    page_footer: "Bir Sonraki Sayfa İçin: %s0"
   schematic:
-    schematıc_format: "&eKullanılabilir Formatlar: &7(&aİsim&7: &aArama_İsmi&7)"
-    schematıc_loaded: "&c%s0 &aBaşarıyla Yüklendi. Yapıştırmak İçin: &b//paste"
-    schematıc_saved: "&c%s0 &aBaşarıyla Kaydedildi."
-    schematıc_page: "&cSayfa &b%s &cOlmak Zorunda"
-    schematıc_none: "&cBöyle Bir Schematic Bulunamadı."
-    schematıc_lıst: "&eKullanılabilir Dosyalar &7(&aDosya_Adı&7: &aFormat&7) [&b%s0&7/&c%s1&7]:"
-    schematıc_lıst_elem: "&8 - &a%s0 &8- &7%s1"
+    schematıc_format: "Kullanılabilir Formatlar: (İsim: Arama_İsmi)"
+    schematıc_loaded: "%s0 Başarıyla Yüklendi. Yapıştırmak İçin: //paste"
+    schematıc_saved: "%s0 Başarıyla Kaydedildi."
+    schematıc_page: "Sayfa %s Olmak Zorunda"
+    schematıc_none: "Böyle Bir Schematic Bulunamadı."
+    schematıc_lıst: "Kullanılabilir Dosyalar (Dosya_Adı: Format) [%s0/%s1]:"
+    schematıc_lıst_elem: " - %s0 - %s1"
   clipboard:
-    clıpboard_urı_not_found: "&c%s0 &eYüklü Değilsin"
-    clıpboard_cleared: "&aPano Temizlendi"
-    clıpboard_ınvalıd_format: "&eBelirsiz Pano Formatı: &c%s0"
+    clıpboard_urı_not_found: "%s0 Yüklü Değilsin"
+    clıpboard_cleared: "Pano Temizlendi"
+    clıpboard_ınvalıd_format: "Belirsiz Pano Formatı: %s0"
   visitor:
-    vısıtor_block: "&c%s0 &eBlok Etkilendi"
-    vısıtor_entıty: "&c%s0 &eYaratık Etkilendi"
-    vısıtor_flat: "&c%s0 &eSütun Etkilendi"
+    vısıtor_block: "%s0 Blok Etkilendi"
+    vısıtor_entıty: "%s0 Yaratık Etkilendi"
+    vısıtor_flat: "%s0 Sütun Etkilendi"
   selector:
-    selector_fuzzy_pos1: "&eBölge Belirlendi ve Genişletildi: &a%s0 &c%s1"
-    selector_fuzzy_pos2: "&eGeniÅŸletme Eklendi: &a%s0 &c%s1"
-    selector_pos: "&c%s0 &eKonumu Artık: &a%s1 &7(&c%s2&7)"
-    selector_center: "&eMerkez Ayarlandı: &a%s0 &7(&c%s1&7)"
-    selector_radıus: "&eYarıçap Ayarlandı: &a%s0 &7(&c%s1&7)"
-    selector_expanded: "&eBölge Genişletildi: &a%s0 &7(&c%s1&7)"
-    selector_ınvalıd_coordınates: "&cBilinmeyen Koordinatlar: &a%s0"
-    selector_already_set: "&cPozisyon Zaten Ayarlandı."
-    selector_set_default: "&eVarsayılan Bölge Seçiciniz: &a%s0"
+    selector_fuzzy_pos1: "Bölge Belirlendi ve Genişletildi: %s0 %s1"
+    selector_fuzzy_pos2: "GeniÅŸletme Eklendi: %s0 %s1"
+    selector_pos: "%s0 Konumu Artık: %s1 (%s2)"
+    selector_center: "Merkez Ayarlandı: %s0 (%s1)"
+    selector_radıus: "Yarıçap Ayarlandı: %s0 (%s1)"
+    selector_expanded: "Bölge Genişletildi: %s0 (%s1)"
+    selector_ınvalıd_coordınates: "Bilinmeyen Koordinatlar: %s0"
+    selector_already_set: "Pozisyon Zaten Ayarlandı."
+    selector_set_default: "Varsayılan Bölge Seçiciniz: %s0"
   timezone:
-    tımezone_set: "&eBu Oturum İçin Belirlenen Saat Dilimi: &a%s0"
-    tımezone_dısplay: "&eBu Saat Dilimindeki Geçerli Saat: &a%s0"
+    tımezone_set: "Bu Oturum İçin Belirlenen Saat Dilimi: %s0"
+    tımezone_dısplay: "Bu Saat Dilimindeki Geçerli Saat: %s0"
   command:
-    command_ınvalıd_syntax: "&cKomut Düzgün Kullanılmadı."
+    command_ınvalıd_syntax: "Komut Düzgün Kullanılmadı."
   help:
-    command_clarıfyıng_bracket: "&c%s0 &eİçin Açıklama Ekini Belirlendi"
-    help_suggest: "&c%s0 &eBulunamadı. Belki Bunlardan Biri İşe Yarar: &a%s1 &e?"
-    help_header_categorıes: "&eKomut Türleri"
-    help_header_subcommands: "&eAlt Komutlar"
-    help_header_command: "&eYardım: &7%s0"
-    help_ıtem_allowed: "&a%s0&8 - &7%s1"
-    help_ıtem_denıed: "&c%s0&8 - &7%s1"
-    help_header: "&eYardım: &aSayfa &2%s0&7/&c%s1"
-    help_footer: "&eWiki: https://git.io/vSKE5"
+    command_clarıfyıng_bracket: "%s0 İçin Açıklama Ekini Belirlendi"
+    help_suggest: "%s0 Bulunamadı. Belki Bunlardan Biri İşe Yarar: %s1 ?"
+    help_header_categorıes: "Komut Türleri"
+    help_header_subcommands: "Alt Komutlar"
+    help_header_command: "Yardım: %s0"
+    help_ıtem_allowed: "%s0 - %s1"
+    help_ıtem_denıed: "%s0 - %s1"
+    help_header: "Yardım: Sayfa %s0/%s1"
+    help_footer: "Wiki: https://git.io/vSKE5"
 progress:
-  progress_message: "%s1/%s0 (%s2%) @%s3cps %s4s &aKaldı"
-  progress_fınıshed: "&7[ &aTAMAMLANDI! &7]"
+  progress_message: "%s1/%s0 (%s2%) @%s3cps %s4s Kaldı"
+  progress_fınıshed: "[ TAMAMLANDI! ]"
 cancel:
-  worldedıt_cancel_count: "&c%s0 &eDüzenleme İptal Edildi."
-  worldedıt_cancel_reason_confırm: "&eSeçiminiz Çok Büyük &7(&a%s0 &7-> &c%s1&7)&e. &c//confirm &eKullanarak &c%s2 &eİşlemini Onaylayabilirsiniz"
-  worldedıt_cancel_reason: "&cWorldEdit İşleminiz İptal Edildi: &e%s0&c."
-  worldedıt_cancel_reason_manual: "&cElle İptal Edildi"
-  worldedıt_cancel_reason_low_memory: "&cDüşük Bellek"
-  worldedıt_cancel_reason_max_changes: "&cÇok Fazla Blok Değiştirildi"
-  worldedıt_cancel_reason_max_checks: "&cÇok Fazla Blok Denemesi Var"
-  worldedıt_cancel_reason_max_tıles: "&cÇok Fazla Blok Durumu Var"
-  worldedıt_cancel_reason_max_entıtıes: "&cÇok Fazla Yaratık Var"
-  worldedıt_cancel_reason_max_ıteratıons: "&cMaksimum Yenileme"
-  worldedıt_cancel_reason_outsıde_regıon: "&cİzin Verilen Bölge Dışında. &7(&eEsgeçmek İçin: &a/wea&e, ya da &b`region-restrictions` &eBölümünü config.yml'den Kapatın&7)"
-  worldedıt_cancel_reason_no_regıon: "&cİzin Verilen Bölge YOK. &7(&eEsgeçmek İçin: &a/wea&e, ya da &b`region-restrictions` &eBölümünü config.yml'den Kapatın&7)"
-  worldedıt_faıled_load_chunk: "&eBazı Chunkların Yüklemesi Atlandı: &a%s0;%s1 &cchunk-wait &eSüresini Arttırmayı Deneyin."
+  worldedıt_cancel_count: "%s0 Düzenleme İptal Edildi."
+  worldedıt_cancel_reason_confırm: "Seçiminiz Çok Büyük (%s0 -> %s1). //confirm Kullanarak %s2 İşlemini Onaylayabilirsiniz"
+  worldedıt_cancel_reason: "WorldEdit İşleminiz İptal Edildi: %s0."
+  worldedıt_cancel_reason_manual: "Elle İptal Edildi"
+  worldedıt_cancel_reason_low_memory: "Düşük Bellek"
+  worldedıt_cancel_reason_max_changes: "Çok Fazla Blok Değiştirildi"
+  worldedıt_cancel_reason_max_checks: "Çok Fazla Blok Denemesi Var"
+  worldedıt_cancel_reason_max_tıles: "Çok Fazla Blok Durumu Var"
+  worldedıt_cancel_reason_max_entıtıes: "Çok Fazla Yaratık Var"
+  worldedıt_cancel_reason_max_ıteratıons: "Maksimum Yenileme"
+  worldedıt_cancel_reason_outsıde_regıon: "İzin Verilen Bölge Dışında. (Esgeçmek İçin: /wea, ya da `region-restrictions` Bölümünü config.yml'den Kapatın)"
+  worldedıt_cancel_reason_no_regıon: "İzin Verilen Bölge YOK. (Esgeçmek İçin: /wea, ya da `region-restrictions` Bölümünü config.yml'den Kapatın)"
+  worldedıt_faıled_load_chunk: "Bazı Chunkların Yüklemesi Atlandı: %s0;%s1 chunk-wait Süresini Arttırmayı Deneyin."
 outside world:
   worldedıt_cancel_reason_outsıde_world: Cancel
 navigation:
-  ascend_faıl: "&cYukarıda Boş Nokta YOK."
-  ascended_plural: "&eYükseltilen Seviye: &a%s0"
-  ascended_sıngular: "&eBir Seviyeye Yükseltildi."
-  unstuck: "&aHOP Buradayım!"
-  descend_faıl: "&cAltında Serbest Nokta YOK."
-  descend_plural: "&eÄ°ndirilen Seviye: &a%s0"
-  descend_sıngular: "&eBir Seviyeye İndirildi."
-  whoosh: "&aAmaniiinnn!"
-  poof: "&aAmaniiinnn!"
-  thru_faıl: "&cDostum Önünde Serbest Nokta YOK."
-  no_block: "&cGörünürde ya da Uzaklarda Blok Yok!"
-  up_faıl: "&cDostum Galiba Tepende Bir Blok Var."
+  ascend_faıl: "Yukarıda Boş Nokta YOK."
+  ascended_plural: "Yükseltilen Seviye: %s0"
+  ascended_sıngular: "Bir Seviyeye Yükseltildi."
+  unstuck: "HOP Buradayım!"
+  descend_faıl: "Altında Serbest Nokta YOK."
+  descend_plural: "Ä°ndirilen Seviye: %s0"
+  descend_sıngular: "Bir Seviyeye İndirildi."
+  whoosh: "Amaniiinnn!"
+  poof: "Amaniiinnn!"
+  thru_faıl: "Dostum Önünde Serbest Nokta YOK."
+  no_block: "Görünürde ya da Uzaklarda Blok Yok!"
+  up_faıl: "Dostum Galiba Tepende Bir Blok Var."
 selection:
-  sel_cuboıd: "&eKüboid: &c1. Nokta İçin Sol_Tıklayın&7, &c2. Nokta İçin Sağ_Tıklayın"
-  sel_cuboıd_extend: "&eKüboid: &cBaşlangıç Noktası İçin Sol_Tıklayın&7, &cUzatmak İçin Sağ_Tıklayın"
-  sel_2d_polygon: "&e2D Çokgen Seçici: &cNokta Eklemek İçin Sağ ya da Sol_Tıklayın."
-  sel_ellıpsıod: "&eElipsoit Seçici: &cSol_Tıklama=Merkez&7, &cUzatmak İçin Sağ_Tıklayın"
-  sel_sphere: "&eKüre Seçici: &cSol_Tıklama=Merkez&/, &cYarıçapı Ayarlamak İçin Sağ_Tıklayın"
-  sel_cylındrıcal: "&eSilindirik Seçici: &cSol_Tıklama=Merkez&7, &cUzatmak İçin Sağ Tıklayın."
-  sel_max: "&aMaksimum Puan: &c%s0."
-  sel_fuzzy: "&eBulanık Seçici: &cŞarta Bağlı Tüm Blokları Seçmek İçin Sol_Tıklayın&7, &cEklemek İçin Sağ_Tıklayın. &aHava Boşluğunu Seçmek İçin: &c//pos1."
-  sel_convex_polyhedral: "&eKonveks Çokyüzlü Seçici: &cSok_Tıklama=İlk_Vertex&7, &eDaha Fazlası İçin &cSağ Tıklayın&7."
-  sel_lıst: "&eSeçim Türlerinin Listesi İçin: &c//sel list"
-  sel_modes: "&eAşağıdaki Modlardan Birini Seçin:"
+  sel_cuboıd: "Küboid: 1. Nokta İçin Sol_Tıklayın, 2. Nokta İçin Sağ_Tıklayın"
+  sel_cuboıd_extend: "Küboid: Başlangıç Noktası İçin Sol_Tıklayın, Uzatmak İçin Sağ_Tıklayın"
+  sel_2d_polygon: "2D Çokgen Seçici: Nokta Eklemek İçin Sağ ya da Sol_Tıklayın."
+  sel_ellıpsıod: "Elipsoit Seçici: Sol_Tıklama=Merkez, Uzatmak İçin Sağ_Tıklayın"
+  sel_sphere: "Küre Seçici: Sol_Tıklama=Merkez&/, Yarıçapı Ayarlamak İçin Sağ_Tıklayın"
+  sel_cylındrıcal: "Silindirik Seçici: Sol_Tıklama=Merkez, Uzatmak İçin Sağ Tıklayın."
+  sel_max: "Maksimum Puan: %s0."
+  sel_fuzzy: "Bulanık Seçici: Şarta Bağlı Tüm Blokları Seçmek İçin Sol_Tıklayın, Eklemek İçin Sağ_Tıklayın. Hava Boşluğunu Seçmek İçin: //pos1."
+  sel_convex_polyhedral: "Konveks Çokyüzlü Seçici: Sok_Tıklama=İlk_Vertex, Daha Fazlası İçin Sağ Tıklayın."
+  sel_lıst: "Seçim Türlerinin Listesi İçin: //sel list"
+  sel_modes: "Aşağıdaki Modlardan Birini Seçin:"
 tips:
-  tıp_sel_lıst: "&7Hatırlatma: &aFarklı Seçim Modlarını Görmek İçin: &c//sel list"
-  tıp_select_connected: "&7Hatırlatma: &aBağlı Tüm Blokları Seçmek İçin: &c//sel fuzzy"
-  tıp_set_pos1: "&7Hatırlatma: &a1. Pozisyonu Desen Olarak Ayarlamak İçin: &c//set pos1"
-  tıp_farwand: "&7Hatırlatma: &aUzak Noktaları Seçmek İçin: &c//farwand"
-  tıp_lazycut: "&7Hatırlatma: &aBu Komutu Kullanmak Daha Güvenli: &c//lazycut"
-  tıp_fast: "&7Hatırlatma: &aHızlıca Geri Almak İçin: &c//fast"
-  tıp_cancel: "&7Hatırlatma: &aDevam Eden Düzenlemeyi İptal Etmek İçin: &c//cancel"
-  tıp_mask: "&7Hatırlatma: &aGenel Hedef Maskesi Ayarlamak İçin: &c/gmask"
-  tıp_mask_angle: "&7Hatırlatma: &a3-20 Bloktan Yukarısını Değiştirmek İçin: &c//replace /[-20][-3] bedrock"
-  tıp_set_lınear: "&7Hatırlatma: &aBlokları Doğrusal Olarak Ayarlamak İçin: &c//set #l3d[wood,bedrock]"
-  tıp_surface_spread: "&7Hatırlatma: &aDüz Yüzeye Yaymak İçin: &c//set #surfacespread[5][0][5][#existing]"
-  tıp_set_hand: "&7Hatırlatma: &aŞuanki Elini Kullanmak İçin: &c//set hand"
-  tıp_replace_ıd: "&7Hatırlatma: &aBlok ID'sini Değiştirmek İçin: &c//replace woodenstair #id[cobblestair]"
-  tıp_replace_lıght: "&7Hatırlatma: &aIşık Kaynaklarını Kaldırmak İçin: &c//replace #brightness[1][15] 0"
-  tıp_tab_complete: "&7Hatırlatma: &cReplace &aKomutu Sekme Tamamlamayı Destekler"
-  tıp_flıp: "&7Hatırlatma: &aAyna İçin: &c//flip"
-  tıp_deform: "&7Hatırlatma: &aYeniden Şekillendirmek İçin: &c//deform"
-  tıp_transform: "&7Hatırlatma: &aDönüşüm Yapmak İçin: &c//gtransform"
-  tıp_copypaste: "&7Hatırlatma: &aTıklayarak Yapıştırmak İçin: &c//br copypaste"
-  tıp_source_mask: "&7Hatırlatma: &aKaynak Maskesi Ayarlamak İçin: &c/gsmask <mask>&7"
-  tıp_replace_marker: "&7Hatırlatma: &aTamamen Yerleştirmek İçin: &c//replace wool #fullcopy"
-  tıp_paste: "&7Hatırlatma: &aYapıştırmak İçin: &c//paste"
-  tıp_lazycopy: "&7Hatırlatma: &lLazyCopy &eDaha Hızlıdır"
-  tıp_download: "&7Hatırlatma: &aİndirmek İçin: &c//download"
-  tıp_rotate: "&7Hatırlatma: &aYönlendirmek İçin: &c//rotate"
-  tıp_copy_pattern: "&7Hatırlatma: &aDesen Olarak Kullanmak İçin: &c#copy"
-  tıp_regen_0: "&7Hatırlatma: &aBiyomları Kullanmak İçin: &c/regen <Biyom>"
-  tıp_regen_1: "&7Hatırlatma: &aBiyom Değeri İçin: &c/regen <Biyom> <Değer>"
-  tıp_bıome_pattern: "&7Hatırlatma: &c#biome[forest] &eDeseni Herhangi Bir Komutta Kullanılabilir"
-  tıp_bıome_mask: "&7Hatırlatma: &c`$jungle` &eMaskesini Bir Biyoma Kısıtla"
+  tıp_sel_lıst: "Hatırlatma: Farklı Seçim Modlarını Görmek İçin: //sel list"
+  tıp_select_connected: "Hatırlatma: Bağlı Tüm Blokları Seçmek İçin: //sel fuzzy"
+  tıp_set_pos1: "Hatırlatma: 1. Pozisyonu Desen Olarak Ayarlamak İçin: //set pos1"
+  tıp_farwand: "Hatırlatma: Uzak Noktaları Seçmek İçin: //farwand"
+  tıp_lazycut: "Hatırlatma: Bu Komutu Kullanmak Daha Güvenli: //lazycut"
+  tıp_fast: "Hatırlatma: Hızlıca Geri Almak İçin: //fast"
+  tıp_cancel: "Hatırlatma: Devam Eden Düzenlemeyi İptal Etmek İçin: //cancel"
+  tıp_mask: "Hatırlatma: Genel Hedef Maskesi Ayarlamak İçin: /gmask"
+  tıp_mask_angle: "Hatırlatma: 3-20 Bloktan Yukarısını Değiştirmek İçin: //replace /[-20][-3] bedrock"
+  tıp_set_lınear: "Hatırlatma: Blokları Doğrusal Olarak Ayarlamak İçin: //set #l3d[wood,bedrock]"
+  tıp_surface_spread: "Hatırlatma: Düz Yüzeye Yaymak İçin: //set #surfacespread[5][0][5][#existing]"
+  tıp_set_hand: "Hatırlatma: Şuanki Elini Kullanmak İçin: //set hand"
+  tıp_replace_ıd: "Hatırlatma: Blok ID'sini Değiştirmek İçin: //replace woodenstair #id[cobblestair]"
+  tıp_replace_lıght: "Hatırlatma: Işık Kaynaklarını Kaldırmak İçin: //replace #brightness[1][15] 0"
+  tıp_tab_complete: "Hatırlatma: Replace Komutu Sekme Tamamlamayı Destekler"
+  tıp_flıp: "Hatırlatma: Ayna İçin: //flip"
+  tıp_deform: "Hatırlatma: Yeniden Şekillendirmek İçin: //deform"
+  tıp_transform: "Hatırlatma: Dönüşüm Yapmak İçin: //gtransform"
+  tıp_copypaste: "Hatırlatma: Tıklayarak Yapıştırmak İçin: //br copypaste"
+  tıp_source_mask: "Hatırlatma: Kaynak Maskesi Ayarlamak İçin: /gsmask <mask>"
+  tıp_replace_marker: "Hatırlatma: Tamamen Yerleştirmek İçin: //replace wool #fullcopy"
+  tıp_paste: "Hatırlatma: Yapıştırmak İçin: //paste"
+  tıp_lazycopy: "Hatırlatma: &lLazyCopy Daha Hızlıdır"
+  tıp_download: "Hatırlatma: İndirmek İçin: //download"
+  tıp_rotate: "Hatırlatma: Yönlendirmek İçin: //rotate"
+  tıp_copy_pattern: "Hatırlatma: Desen Olarak Kullanmak İçin: #copy"
+  tıp_regen_0: "Hatırlatma: Biyomları Kullanmak İçin: /regen <Biyom>"
+  tıp_regen_1: "Hatırlatma: Biyom Değeri İçin: /regen <Biyom> <Değer>"
+  tıp_bıome_pattern: "Hatırlatma: #biome[forest] Deseni Herhangi Bir Komutta Kullanılabilir"
+  tıp_bıome_mask: "Hatırlatma: `$jungle` Maskesini Bir Biyoma Kısıtla"